SWS ENGINEERING AND WATER SOLUTIONS for packageed drinking water industry
Consultant and manufacturers for chemicals used in water industry and cleaning
2. MELT BLOWN FILTER ELEMENT
Melt Blown Filter Cartridges are made of 100% polypropylene fibres. The filters provide excellent filtration at a relatively
economical price. The density gradient across the radius, higher at the core ensure better filtration efficiency. They have excellent
chemical resistance and can operate to working temperatures of up to 60 deg c. These filters are thermally bonded hence
preventing any sort of external contamination. They have lower pressure drops of operation, longer operation life and higher dirt
holding capacities.
Specifications:
Media of Construction: Polypropylene
Outside Diameter: 2.5”, 4”, 4.5”
Length: 10”, 20”, 30”, 40”
Micron Ratings: 5 Micron to 40 Micron
End Caps: DOE
Filter Change out Pressure Drop: 25 psi
Maximum Operating Temperatures: 60 deg C
Applications:
Chemical products, Petrochemicals, Waste water Treatment, Food and Beverages
3. PLEATED SYNTHETIC FILTER ELEMENT
Pleated Synthetic Filter Cartridges are made of 100% polypropylene. Their high surface area
as compared to depth filters and finer micron ratings provide excellent filtration. The end caps
are thermally bonded preventing contamination by use of any adhesives. These elements
provide superior quality filtration coupled with longer life and higher contaminant holding
capacity.
Specifications:
Media of Construction: Polypropylene
Outside Diameter: 2.5”
Length: 10”, 20”, 30”, 40”
Micron Ratings: 0.2 , 0.45, 1, 2, 5, 10 Micron
End Caps: DOE, Code 7
Filter Change out Pressure Drop: 25 psi
Maximum Operating Temperatures: 60 deg c
Applications:
Chemical products, Petrochemicals, Waste water Treatment, Food and Beverages
4. BAG FILTER ELEMENTS
Bag filters are made from polypropylene non woven media.
They provide bulk filtration where large volumes of contamination are to be removed. They provide optimum and efficient filtration solution.
Specifications:
Media of Construction: Polypropylene
Outside Diameter: 4”, 6”
Length: 20”, 32”
Micron Ratings: 5 Micron to 40 Micron
Maximum Operating Temperatures
Applications : Paints, Inks, Varnish, Resins and Water
5. REVERSE OSMOSIS ANTISCALANT
Antiscalant is specially designed to inhibit inorganic scale formation and fouling in the membrane separation system. Controls the scales of
Calcium Carbonate, Calcium Sulfate, Barium and Strontium Sulfate in waters with a high scaling potential. Stabilize a wide range of
supersaturated salt solutions, thereby preventing the precipitation on the membrane surface (Also for high TDS).
Antiscalant is also useful for iron & silica rich feed water, which helps to prevent iron fouling in the R.O membrane.
6. MINERALS ADDITIVES
Water Minerals are part of the water treatment process which involves desalinization, remineralization,
alkalinity boosting etc.
Water Minerals are part of the water treatment process which involves desalinization, remineralization,
alkalinity boosting etc.
These chemicals help to maintain mineral composition of water compared to the water derived from other
conventional fresh water resources.
These chemicals act as a natural buffer and serve to be good nutrient additives.
Mineral Additives proves to be electrolyte replenisher and several mineral supplements
These chemicals help to maintain mineral composition of water compared to the water derived from other
conventional fresh water resources.
These chemicals act as a natural buffer and serve to be good nutrient additives.
Mineral Additives proves to be electrolyte replenisher and several mineral supplements.
7. TITLE LOREM IPSUM DOLOR
LOREM IPSUM DOLOR SIT AMET,
CONSECTETUER ADIPISCING ELIT.
NUNC VIVERRA IMPERDIET ENIM.
FUSCE EST. VIVAMUS A TELLUS.
PELLENTESQUE HABITANT MORBI
TRISTIQUE SENECTUS ET NETUS.