Do you want to know how to set up your Canon printer and fix its problems? If so, you have reached the right place. We assist you in setting up your printer and troubleshooting the printer problems. Solve the issues and take printing to the next level using our Canon printer support: https://photo-printer.co/

1. Fix: Canon Pixma Printer
Troubleshooting
Why Is My Canon Printer in An Error State?
1. A Canon printer can be in an error state if there is a problem with the
printer connection or the drivers.
2. First, see if there is a paper jam on your Canon printer. If so, remove all
the jammed paper from the specified location.
3. Check the connection between your printer and computer and re-
establish the connection if necessary.
4. Sometimes, the problems can be resolved when you restart your printer.
Power off your Canon printer and the computer. Leave them undisturbed
for a minute. Then, turn on your Canon printer setup and computer.
5. If the error prevails, uninstall the older version of printer drivers from
your computer. Download & install the Canon printer driver from the link
given on this site.

2. 6. Connect your Canon printer to your computer and try printing a sample
page to ensure that the error is fixed.
7. If you face the same problem, you can proceed to reset the Canon printer.
How To Find My Canon Printer Ip Address?
You can check the Canon printer’s IP address by printing a User Data List. Do so
by following the set of guidelines given below.
1. Turn on the Canon printer by pressing the Power button.
2. Load a fresh stack of paper into the paper input tray. Make sure only to
load the A4 sheets only as the User Data list can be printed only on these
sheets.
3. Locate the Go button and press it for 3 seconds.
4. The Canon printer will start to print the User Data List.
5. You can locate the IP Address of the Canon printer on the User Data list.
Fix- Canon Printer Is Not Recognized During Driver
Installation
The Canon printer might not be recognized during the driver installation when
the network connection is interrupted. The following guidelines can help you
fix the problem.
1. Ensure that your printer is turned on.
2. Now, examine the USB cable you are using.
3. Disconnect and reconnect the USB cable to the correct port securely.
4. The flat end should be attached to the printer’s port.
5. The square end should be connected to the computer’s USB port.
6. If you connect your printer and computer using a network connection,
ensure that they are connected to the same network.

3. 7. Now, the Canon printer will be recognized during the installation.