2. Spotcom's association with Elpro Technologies (now part of Aquamonix) goes
back a long way- allowing us to really get to know their products. They are
designed and built to exacting standards, to give first class performance even in
the most demanding circumstances.
When others fail, the Elpros step up to the mark- that is exactly what is needed if
the application demands reliability. Hence, over the years, they have quietly
become the radio of choice for many Utilities and infrastructure providers, where
their performance and reliability track record has been firmly established.
We are able to supply radios on a uniquely wide range of frequencies, ranging
from 5 GHz, down to the newly available "60 MHz" or Band 1 VHF.
Wireless Solutions and Support Services
Spotcom Ltd.-
Telemetry I/O, Gateway, Serial and Ethernet.
• Band 1 VHF (“60 MHz”)
• VHF (140 – 170 MHz)
• UHF (458, 450/460 and 869MHz)
• Wi-Lan (2.4 and 5.6 GHz).
Site Services- Surveys, Commissioning assistance,
Troubleshooting, maintenance. From Concept to Completion.
Excellent service life and reliability – for all bands!
3. Why Choose Elpro?
Wireless Solutions and Support Services
QualityFlexibilityLongevityEase of UseReliabilityLow Cost of Ownership
4. Why Choose Elpro?
Wireless Solutions and Support Services
Licenced Vs. Licence Free….
Elpro Radios ALL exceed the Licenced radio receiver specifications- even the licence free
models ( no Traffic light Syndrome!).
Bespoke radio circuit design- not “off the shelf” chips. Unlicensed radios are the same as
the Licensed in all but Tx power.
Licensed- Private frequency security, Long range ability (Higher Tx power).
Unlicensed- Convenience of use, better suited to shorter links.
5. Why Choose Elpro?
Wireless Solutions and Support Services
Robust and Secure….
High level radio transmission encryption on virtually all radios. Multi-level password
secured.
Licence free Wideband 869 MHz modulation scheme- fast and channel- user tolerant.
N.M.S. open architecture.
458 MHz- Licence free, Wide or Narrow band, single or dual channel with low utilisation,
encrypted, licenced Rx performance.
60MHz,170 MHz, 450/460 MHz Licenced options.
6. Introducing…Band 1 VHF Modems and Telemetry
The Reliable Adverse Terrain Solution.
ELPRO 455U-D
Telemetry Radio
An ideal candidate for leased line/Private wire
Replacement!
Our 60MHz Systems have been proven to link across sites where it is
not possible for higher frequency's. They have racked up years of
solid performance, where conventional UHF radios simply could not
make the trip.
Land occlusion, Power lines, Transformers and other obstacles which
would usually make it difficult for the higher UHF Frequencies to
function dependably, but present fewer problems for the 60MHz
Band.
8. 415U-2-C 415U-2-E
Wireless I/O Gateway Wireless Ethernet Gateway
• Exceeding 140 kbps data throughput (25 kHz channel and compression)
• Typical range (Loss QPSK-FEC) - 62 miles (100 km) at 4 W - 10 miles (16 km) at 0.5 W
• Secure data protection with WPA and AES256 encryption
• Full Ethernet protocol over the air provides a standards-based flexibility to support
future and legacy devices
• ProMesh automatic path selection and network formation
• Internal Web dashboard for immediate view of local I/O
• Supports multiple data rates simultaneously for high performance over short and
long communication links
• Frequency agility roaming provides reliability and flexibility within the network
architecture
• Wireless point-to-point or multipoint I/O and gateway functionality
• Modbus TCP and RTU I/O gateway
• DNP3 I/O gateway, including internal status registers
• 340–480 MHz frequency range in just 2 models. VHF available from Q3 2019
• 10 mW to 10 W RF power configurable, license or license-free
• Integrated digital, pulse, and analogue I/O
• Over-the-air network diagnostics and configuration
• Expandable I/O for local alarms and inputs/outputs
Licenced / Unlicensed VHF/UHF Meshing
I/O, Ethernet, Serial, Gateway Radio
9. 415U-2 ProMesh Networking Mode
A ProMesh network consists of a Base
and multiple Mesh Nodes.
In a ProMesh network, any Mesh Node site can act
as a repeater to provide a path for other stations
to reach the Base.
Base
Target
Unit
Scada
PC
Radio System
Supervisory
PC
The ProMesh network automatically configures
itself to a tree structure with the Base station at
the root. When a Mesh Node cannot find a direct
connection to the base, It chooses another Mesh
Node to act as a repeater based on the best
available path to the base.
If a node goes offline while connected to a Mesh
network, the 415U-2 will automatically re-route a
new path in order to reach the destination unit.