1. C‐MET testing report

7. Form No. 7/A – TSR (Rev.03)
BAGAVATHI ANA LABS
TEST REPORT
Name & Address of the Customer : Test Report No.: BALPL/14-15/ITD- 0731/1
M/s. SRINIVASA & NARASIMHA SCENITIFIC
REASEARCH ,& DEVELPOMENT TRUST
Issue Date :11-8-2014H.No-2-1-16-1, Beside Dhana Lakshmi Agro Industries,
O.V Road, Revenue colony Kandakur, Prakasam Dist.
Your Ref : Nil
Sample Particulars: Crystalline Copper Metal – C – 2101 Date : Nil
Qty : 1 No. Date of Registration : 02.08.2014
Method of Testing : IS: 440-1964 Date of commencement of testing : 04.02.2014
Test Required : As given below Date of completion of testing : 09.08.2014
Sample condition at receipt : Found ok
Sample tested as received
Sampling Method: Sample collected and submitted by the customer Page: 1 of 1
Test Results
Sl. No Test Parameter Results obtained
1. Copper as Cu, % by mass 99.90
2. Iron as Fe, ppm 74
3. Zinc as Zn, ppm 802
Interpretation of results: Nil
Deviation from test method and condition: Nil
Bhagavathi Ana Labs Pvt. Ltd. Central Laboratory - Industrial Testing Division
(A Bureau Veritas Group Company)
Plot No. 7-2-C 14, Industrial Estate, Sanathnagar, Hyderabad - 500 018.
INDIA Tel.: +91 40 23811535, 23711536 • www.bhagavathianalabs.com
Note: This Report is subject to the terms and conditions mentioned overleaf
A260499

8. Form No. 7/A – TSR (Rev.03)
BAGAVATHI ANA LABS
TEST REPORT
Name & Address of the Customer : Test Report No.: BALPL/14-15/ITD- 0731/2
M/s. SRINIVASA & NARASIMHA SCENITIFIC
REASEARCH ,& DEVELPOMENT TRUST
Issue Date :11-8-2014H.No-2-1-16-1, Beside Dhana Lakshmi Agro Industries,
O.V Road, Revenue colony Kandakur, Prakasam Dist.
Your Ref : Nil
Sample Particulars: Crystalline Copper Metal – C – 2101 Date : Nil
Qty : 1 No. Date of Registration : 02.08.2014
Test Required : As given below Date of commencement of testing : 04.08.2014
Date of completion of testing : 09.08.2014
Sample condition at receipt : Found ok
Sample tested as received
Sampling Method: Sample collected and submitted by the customer Page: 1 of 1
Test Results
Sl. No Test Parameter Results obtained
1. Tensile Strength, MPa 81
2. Percentage Elongation 8.0
3. Hardness, HBW 28
4. Yield Strength, MPa 68
Interpretation of results: Nil
Deviation from test method and condition: Nil
Bhagavathi Ana Labs Pvt. Ltd. Central Laboratory - Industrial Testing Division
(A Bureau Veritas Group Company)
Plot No. 7-2-C 14, Industrial Estate, Sanathnagar, Hyderabad - 500 018.
INDIA Tel.: +91 40 23811535, 23711536 • www.bhagavathianalabs.com
Note: This Report is subject to the terms and conditions mentioned overleaf
A260500

10. /////////////////////////////////////////////////////////////////////////
////////
/// Peak Data Ascii Dump (XRD)
///
/////////////////////////////////////////////////////////////////////////
////////
Group : KP
Data : KP
File Name : C2101.PKR
# Peak Datafile
comment = C2101
date & time = 21-08-15 10:30:18
# Measurement Condition
X-ray tube
target = Cu
voltage = 40.0 (kV)
current = 30.0 (mA)
Slits
divergence slit = 1.00000 (deg)
scatter slit = 1.00000 (deg)
receiving slit = 0.30000 (mm)
Scanning
drive axis = Theta-2Theta
scan range = 10.000 - 80.000
scan mode = Continuous Scan
scan speed = 4.0000 (deg/min)
sampling pitch = 0.0200 (deg)
preset time = 0.24 (sec)
# Peak Data List [ Total No. = 12 ]
No. <2Theta> < d > < I > <I/Io> < FWHM > <integrated I>
1 15.3000 5.78645 72 26 1.8800 5021
2 16.1800 5.47366 74 27 2.4800 5520
3 17.8000 4.97898 25 9 1.0400 1475
4 19.7600 4.48931 23 8 1.4400 1719
5 21.0600 4.21504 60 22 1.6000 5262
6 22.8683 3.88566 272 100 1.5167 17819
7 24.1200 3.68678 64 24 0.8000 3020
8 25.1400 3.53946 16 6 0.8200 984
9 34.1000 2.62716 16 6 0.8000 608
10 34.7200 2.58165 32 12 1.0000 1451
11 35.9000 2.49946 8 3 0.0000 0
12 77.4900 1.23080 9 3 0.3800 212

12. MELTING POINT OF C2101 -8M
Apparatus’ used: MP
Instrument model : MP 120
Range of temp scanning: up to 1500o
c
Heating rate: 1-20 o
c
Melting point Range Found: 1120-1135 o
c

18. MLS/QCF/03 MASCOT LABORATORY SERVICES 0356
No.93, 3rd Phase, 7th Main, Peenya Industrial Area, Bangalore - 560 058.•
if (O); 080-28393476, Telefax: 080-41273119, Website :www.mascotlaboratory.com
E-mail: mascotlaboratory@gmail.com
A Unit of MIs. Essen & Co.
Accredited by NABL
Approved by Ministry of Defence (DGQA) BEML, Bangalore for Chemical/Mechanical, Metallography and NDT.
•MASCOT
WHeRe PROGRESS
IS CON1]NUOUS
T. C. No. MLS/2015-2016/4290
1. Customer Name & Address
2. Customer Reference
3. Date of Receipt
4. Date of Testing
5. Date of Completion of Test
6. Test Conducted
7. Test Method
8. Description of the sample
LAB No.
TEST REPORT
Date: 15.06.2015
Mis. RASAKALPA ANCIENT INDIAN
TECHNOLOGY DEVELOPMENT CENTRE
H.No.2-1-16/1, Beside Dhana Lakshmi Agro Industries,
O.V. Road, Revenue Colony, Kandukur-523105, Prakasam
Dist., Andhra Pradesh.
No: MLS/QTNI2015-16/015, Dated: 15.05.2015
11.06.2015
13.06.2015
13.06.2015
Electrical Conductivity Test
IS: 5082-1998, RA - 2003
Material Code: C-2101, Ancient Name: Kopu Tamra Loham,
Modem Name: Copper Metamaterial, Shape: Rechangular
Black(Metal), Weight in grams: 400
TEST RESULTS
MLS-2930
• Electrical Conductivity at 20°C = 72.5% lACS
--------------------~~-------------------
Page 1 of 1
lChecked by:Tested by:
J Authorised Signatory
Vinay~ ~ Ku~karnl
Clllel M*Oager -Operat;ons/QUafitrNote:
1. Sampling not done by us. Results related only to the samples submitted.
2. This certifitate shall not be.reproduced in par' or full and cannot be used as evidence in a court of law without prior permission in writing.
3. Total liability of tbe Labontory is Limited to the Invoiced Amount.
4. Sample will be preserved for a maximum of 30 days from the date of test certiflcate, After which no complaint will be entertained regarding test results.

19.
Mascot lab testing report ‐4th
melting
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐