1. Ramez El-Sayed Sami Ahmed
Address 1: 42 el gaish st, Suez, Suez, Egypt
Address 2: 5 mostafa kamel sharazad Buldings, Somoha, Alexandria, Egypt
Mobile: +201000956930 Phone: +20623196272
E-mail:ramezsami9@gmail.com
Resume cover page:
I am eager to introduce myself as a candidate for a Mechanical Engineer position within the functional
structure of your reputable company where I can apply my interpersonal skills, academic background,
internship and work experience.
I finished my academic studying, Mechanical Power Engineering, higher technology institute 2008. I have
been worked at Red Sea Navigation Company For 1 year as Diesel engines onshore mechanical
maintenance engineer then i went to naval forces workshops in ship yard as mechanical maintenance
engineer (military services for 3 years) . Finally I have been working with Suez Steel Company 5 years
with vast and versatile experience of Mechanical Commissioning, Start-up and Maintenance in Direct
Reduction Plant (Process Plant). I have very good knowledge:
 Mechanical erection and installation of mechanical equipment.
 Mechanical erection of piping and pipelines (fitting, welding, NDT inspection).
● Experienced in Rotating Machinery such compressors I was responsible for Siemens centrifugal
compressor overhaul centrifugal type.
● John crane single stage dry gas seal dismantle onsite with vendor three times for visual inspection
& replacement and modification.
● Gearboxes (Rossi gearboxes ) .
pumps (KSB ( centrifugal pumps ( packing seal ) ) & Ruhrpumpen ( ● centrifugal pumps ( mechanical
seals )) & prominent ( positive displacement pump ( reciprocating diaphragm type ) & OBL (
reciprocating diaphragm type ) , sera ( reciprocating diaphragm type ) ) erection , start up
maintenance .
● mobuis institute certification Level II Vibration Certification .
● experience in diesel engines ( Erection & start up and maintenance ) .
● Strong proficiency in reliability engineering principles and techniques, and the successful
implementation of this knowledge.
●Ability to work under minimum supervision .
● Team player with good communication and problem-solving skills .
● very good in English .
● Basic Computing, MS Office, CAD and CMMS.
I can relocate.
-Enclosed is my resume for your review.

2. Personal Information
Objectives
To hold a challenging position in industry where I can deliver a quality job and apply my
knowledge and education in a professional environment that would allow me to grow and
support the strong reputation of the organization.
Education
 BSc. Eng. in mechanical Engineering
Higher Technological Institute in Tenth of RamadanCity ,
graduation grade: ( good) ,tenth of Ramadan city , Egypt. 2008.
Graduation Project:
Successfully completed a graduation project with "Excellent" Grade in mechanical
Engineering under the title of:“condensate under flat plat ”
EgyptPlace Of Birth6/5/1985Date of birth
EgyptianNationalityDoneMilitary service

3. Courses Attended:
1- Osha general industry safety and health ( 30 hours )
2-NASP safety diploma in workplace occupational safety and health (40houres )
3- Osha construction ( 30 hours ) .
4-Training by (Tenova HYL) for DRP Zero Reformer technology.
For the maintenance of the DRI plant in Suez Steel company (2011), (the
biggest plant all over the world works with the ZR technology for hot & cold product), Suez .
5-Training by (Tenova HYL – Ternium) for DRP in 3M5 plant (Cold discharge) &4M plant for (Hot
discharge), Mexico, Monterrey, June 2012. As a mechanical maintenance engineer .
6- Training by (Tenova HYL) for DRP Zero Reformer technology.
For the maintenance of the DRI plant in Suez Steel company ( 2013 ) site training .
7 - Pump Maintenance and Operation course (Engineers Syndicate) ( 30 hours )
8 - Compressor Maintenance and Operation course ( Engineers Syndicate). ( 30 hours )
9- Certified Vibration Analysis Cat ∏ (MOBIUS, NATCOM Egypt).
10- Rotating equipment mechanical seals. ( AMERICAN UNVERSITY CAIRO ) .
11- Hydraulic circuits . ( Yasser Fahmy co. Rexroth agent Egypt )
12- shell lubricants Expert program ( shell )
13- Penetration test welding inspection course .
14 – ASME B31.2 GAS distribution course . ( AMERICAN UNVERSITY CAIRO )
15- certified professional mechanical engineering ( ONLINE course in progress ) . ( EIT)
Certificates of all of the above courses are available for review on request.

4. Experience
** FROM 1/12/2007 TO 04/9/2008 mechanical engineer assistant in red sea maritime
company in maintenance work shop in Adebia port .
** FROM 23/9/2009 TO 1/3/2011 Served the military service in the Egyptian naval forces as a
first lutein engineer in mechanical and electrical workshop and base safety officer in Suez
naval base ,
** FROM/7/2011 till present SUEZ STEEL COMPANY (SSC)
 Mechanical engineer for Suez Steel Company (Erection of the new DRI plant)
- Responsible equipment’s erection (construction & material) of the following areas:
* Reactor tower area.
* Cooler tower area.
* HYTEMP tower area
o In-charge of final inspections in site, documents preparation, and final
Checklist.
o After start up of the DRP-Suez Steel Co., as a Mechanical maintenance engineer.
- Commissioning experience:
o Water, Gas, Hydraulic & Grease lines loops & preparations for:
 Air blowing & cleaning.
 Flushing.
 Pressure test.
 Pickling & cleanings of pipe lines.
Tower area ( Reactor& Cooler &Hy-temp towers) equipment’s
( Vs2 valves &lub.plug valves & rotary valve & flow feeders shafts ) Adjusting:
 Actuating hydraulic pressure and flow rate for valves and flow feeders
 Mechanical stoppers &inflatable seals pressure and gap
o Shift Mechanical Engineer :
 Evaluate the performance of the plant's equipment and drive it in the most stable & safe
techniques.
 Follow preventive maintenance schedule and guidelines.

5.  Solve the problem from root cause.
 Maintain the record of maintenance and spare part consumption details.
 Report all the problems and action taken for repairing and prevention to Maintenance In
charge/ supervisor.
 Take necessary action in consultation with Maintenance In charge for reducing the frequency
of breakdown of machineries.
 Day Mechanical Maintenance Engineer :
 Responsible for preparing preventive Maintenance technique plans (schedules) of
Material handing Area.
 Responsible for Predictive Maintenance & Machines Condition Monitoring of Material
handing Area.
 Responsible for Proactive Maintenance & Issuing Root Cause analysis Reports.
 Day Mechanical Maintenance Engineer :
 Responsible for overhaul Maintenance of Process Gas Compressor (Siemens Turbo
compressor Go-(48-1-G)).
.
ComputerSkillsTechnical skills:
Great communicationskills - pumpsoperation&maintenance
Team work - Compressoroperation&
Arabic(mothertongue) troubleshooting.
Fluent English - HYL Techspecial equipment
Managementskills Maintenance.
-Mechanical valvesrepair
Internettools
Windowscompatible
MS office package
AutoCad (2000)