1. c
d
Product Information
Specialty
Lubricants MOLYKOTE® M 30
Dispersion
Black dispersion of solid lubricants in synthetic oil
FEATURES
APPLICATION
" Fluid lubrication up to +200ºC (392ºF) " Used succesfully on chains and rollers of conveyor belts.
" Dry lubrication up to +450ºC (842ºF)
" No resinification
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications.
COMPOSITION Please contact your local Dow Corning sales representative prior to writing specifications on
this product.
" Synthetic oil
" Molybdenum disulphide
" Dispersant Standard* Test Unit Result
Color Black
Density, viscosity
DIN 51 757 Density at 20ºC (68ºF) g/ml 1.0
DIN 51 562 Base oil viscosity at 40ºC (104ºF) 1
mm /s2
120
Temperature
Upper service temperature limit ºC Fluid lubrication
up to +200;
Dry lubrication up
to +450
ºF Fluid lubrication
up to 392;
Dry lubrication up
to 842
Load-carrying capacity, wear protection
Four-ball tester (VKA)
DIN 51 562 pt.2 Weld load N 2000
DIN 51 350 pt.3 Wear scar under 800N load mm 1.02
Almen-Wieland machine
OK load N 20000
1. Calculated viscosity value of base oil mixture.
* DIN: Deutsche Industrie Norm.
HANDLING PRECAUTIONS
HOW TO USE Product safety information required for
How to apply safe use is not included. Before
Clean areas of contact before first handling, read product and safety data
application. Apply using brush, oil can, sheets and container labels for safe use,
spray gun or drip oiler. Can also be physical and health hazard information.
used with metering equipment and The material safety data sheet is
automatic spray devices. Do not mix available on the Dow Corning website
with grease or oils. at www.dowcorning.com. You can also
obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.

2. USABLE LIFE AND LIMITED WARRANTY
STORAGE INFORMATION - PLEASE
When stored at or below 20ºC (68ºF) in READ CAREFULLY
the original unopened containers, this The information contained herein is
product has a usable life of 12 months offered in good faith and is believed to
from the date of production. be accurate. However, because
conditions and methods of use of our
PACKAGING products are beyond our control, this
This product is available in different information should not be used in
standard container sizes. Detailed substitution for customer's tests to
container size information should be ensure that Dow Corning's products are
obtained from your nearest safe, effective, and fully satisfactory
Dow Corning sales office or for the intended end use. Suggestions
Dow Corning distributor. of use shall not be taken as
inducements to infringe any patent.
LIMITATIONS
This product is neither tested nor Dow Corning's sole warranty is that the
represented as suitable for medical or product will meet the Dow Corning
pharmaceutical uses. sales specifications in effect at the time
of shipment.
HEALTH AND
ENVIRONMENTAL Your exclusive remedy for breach of
INFORMATION such warranty is limited to refund of
To support Customers in their product purchase price or replacement of any
safety needs, Dow Corning has an product shown to be other than as
extensive Product Stewardship warranted.
organization and a team of Product
Safety and Regulatory Compliance DOW CORNING SPECIFICALLY
(PS&RC) specialists available in each DISCLAIMS ANY OTHER
area. EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
For further information, please see our PARTICULAR PURPOSE OR
website, www.dowcorning.com or MERCHANTABILITY.
consult your local Dow Corning
representative. DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THE
FUTURE."
www.dowcorning.com
MOLYKOTE M 30 Dispersion WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation.
2 09/04/2002 MOLYKOTE is a registered trademark of Dow Corning Corporation.
Ref. no. 71-0155C-01 DC 3009 ©1997-2002 Dow Corning Corporation. All rights reserved.