2. Instruction
Wall Graphic Transfer
Wipe the wall or intended surface with a clean damp cloth
to assure that it is clean and free of grease. When the wall
is clean use a sponge with plenty of water and make the
wall wet. The wetter the wall is the easier the Wall Graphic
Transfer will release.
Face the colored side of the Wall Graphic Transfer sheet to-
wards the wall. You can use the black outline printed on the
back of the sheet to help you position the transfer correctly.
If the Wall Graphic Transfer touches the wall, you can gently
remove and reposition it, as long as no pressure has been
applied and there is enough water on the wall.
Once you determine the desired placement, press the Wall
Graphic Transfer sheet firmly against the wall using a rubber
or foam roller. Use a sponge with plenty of water and make
the back of the Wall Graphic Transfer wet untill the paper
changes color.
Now use a rubber or foam roller to the outside of the transfer
so you get rid of the water that is under the paper. Wait 1
minute. Now gently peel back one corner of the paper from
the wall. Make sure to check that Wall Graphic Transfer is
set. If not, use the sponge one more time to wet the back of
the Wall Graphic. After one hour, use a wet sponge on the
edges to attach the Wall Graphic firmly to the wall.
Technichal specifications:
Product size: 16x35 cm