Annealing imparts higher ductility to material but it reduces its ul.pdf

•

0 likes•2 views

Annealing imparts higher ductility to material but it reduces its ultimate tensile strength. Solution Annealing imparts higher ductility to material but it reduces its ultimate tensile strength..

Education

More from preetajain

x = 0.3, and y0 = 0 so, interval ==>[0,0.3] step soize = h = 0.1 applying Euler approximation x(n+1) = xn + h and y(n+1) = yn + hf(xn,yn) x(n+1) = xn + h x1 = x0 + h = 0.1 y(n+1) = yn + hf(xn,yn) or, y1 = y0 + hf(x0,y0) = 1 + 0.1(xo+yo) = 1 + 0.1(0+1) = 1.1 so, x1 = 0.1 y1 = 1.1 again x(n+1) = xn + h x2 = x1 + h = 0.2 y(n+1) = yn + hf(xn,yn) or, y2 = y1 + hf(x1,y1) = 1.1 + 0.1*(x1 + y1) = 1.1 + 0.1(0.1 + 1.1) = 1.22 so, x2 = 0.2 y2 = 1.22 again x(n+1) = xn + h x3 = x2 + h = 0.3 y(n+1) = yn + hf(xn,yn) or, y3 = y2 + hf(x2,y2) = 1.22 + 0.1*(x2 + y2) = 1.22 + 0.1(0.2 + 1.22) = 1.363 so, x3 = 0.3 y3 = 1.362 again x(n+1) = xn + h x4 = x3 + h = 0.4 y(n+1) = yn + hf(xn,yn) or, y4 = y3 + hf(x3,y) = 1.362 + 0.1*(x3 + y3) = 1.362 + 0.1(0.3 + 1.362) = 1.5282 so, x2 = 0.4 y2 = 1.5282 the graph of the data set generated will yield the approximate graph of the original equation Solution x = 0.3, and y0 = 0 so, interval ==>[0,0.3] step soize = h = 0.1 applying Euler approximation x(n+1) = xn + h and y(n+1) = yn + hf(xn,yn) x(n+1) = xn + h x1 = x0 + h = 0.1 y(n+1) = yn + hf(xn,yn) or, y1 = y0 + hf(x0,y0) = 1 + 0.1(xo+yo) = 1 + 0.1(0+1) = 1.1 so, x1 = 0.1 y1 = 1.1 again x(n+1) = xn + h x2 = x1 + h = 0.2 y(n+1) = yn + hf(xn,yn) or, y2 = y1 + hf(x1,y1) = 1.1 + 0.1*(x1 + y1) = 1.1 + 0.1(0.1 + 1.1) = 1.22 so, x2 = 0.2 y2 = 1.22 again x(n+1) = xn + h x3 = x2 + h = 0.3 y(n+1) = yn + hf(xn,yn) or, y3 = y2 + hf(x2,y2) = 1.22 + 0.1*(x2 + y2) = 1.22 + 0.1(0.2 + 1.22) = 1.363 so, x3 = 0.3 y3 = 1.362 again x(n+1) = xn + h x4 = x3 + h = 0.4 y(n+1) = yn + hf(xn,yn) or, y4 = y3 + hf(x3,y) = 1.362 + 0.1*(x3 + y3) = 1.362 + 0.1(0.3 + 1.362) = 1.5282 so, x2 = 0.4 y2 = 1.5282 the graph of the data set generated will yield the approximate graph of the original equation.

x = 0.3, and y0 = 0so, interval ==[0,0.3]step soize = h = 0.1.pdf

preetajain

CCl4 All the have ionic bonds. Carbon and Chlori.pdf

preetajain

Let x moles of CF4 be formed at equilibrium. Hence at equilibrium mo.pdf

preetajain

There are two types of diabetes: Diabetes Insipidus and Diabetes mellitus. In both the forms, large amount of urine is expelled from the body. The condition is known as polyuria. Diabetes Insipidus (DI), is either a neurological disorder or a nephrological disorder in humans. --In the neurologic disorder, vasopressin deficiency is there. Vasopressin is the hormone which is released when there is less water in our body. This hormone absorbs all water from the urine and leaves highly concentrated urine for excretion. This hormone is not released when large amount of water is already there in the body. --In the nephrologic disorder, vasopressin is there but the kidney\'s/nephron\'s response to vasopressin is negligible. In Diabetes Mellitus, excess sugar is leaked in the blood, which in turn absorbs excess water from the body, and releases this water in the urine. This condition is known as osmotic diuresis. In all forms of diabetes, a person feels very thirsty; so, he/she will drink large amount of water. And because of deficiency of vasopressin, this excess water will not be absorbed. So, such a patient produces greater volume of dilute urine. Solution There are two types of diabetes: Diabetes Insipidus and Diabetes mellitus. In both the forms, large amount of urine is expelled from the body. The condition is known as polyuria. Diabetes Insipidus (DI), is either a neurological disorder or a nephrological disorder in humans. --In the neurologic disorder, vasopressin deficiency is there. Vasopressin is the hormone which is released when there is less water in our body. This hormone absorbs all water from the urine and leaves highly concentrated urine for excretion. This hormone is not released when large amount of water is already there in the body. --In the nephrologic disorder, vasopressin is there but the kidney\'s/nephron\'s response to vasopressin is negligible. In Diabetes Mellitus, excess sugar is leaked in the blood, which in turn absorbs excess water from the body, and releases this water in the urine. This condition is known as osmotic diuresis. In all forms of diabetes, a person feels very thirsty; so, he/she will drink large amount of water. And because of deficiency of vasopressin, this excess water will not be absorbed. So, such a patient produces greater volume of dilute urine..

There are two types of diabetes Diabetes Insipidus and Diabetes mel.pdf

preetajain

The difference between these two types of inflation is found in their causes. Both have the same effects (increasing price level), but they are caused by different things. Demand-pull inflation is caused by excess demand. When the people as a whole get more money they are able to pay more for goods and services (unless more goods and services are produced). Economists talk about more money \"chasing\" the same amount of goods and services. This causes shortages and prices rise. Cost-push inflation is caused by disruptions in supply. These disruptions cause increases in the price of production. That leads to inflation. For example, a rise in the price of oil causes practically all production to become more expensive. There is no technical way to determine for sure which kind of inflation is going on. Analysts must simply look around to try to see if the money supply is increasing or if there are supply shocks. Then they have to make informed guesses about why the inflation is happening. Why Savings equals Investment: Using the GDP equation to explain saving and investing: Begin with our GDP equation for an open economy: Y = C + I + G + NX To simplify this idea, let’s look at a closed economy, where there are no imports or exports. This means that NX will equal 0 and will therefore drop out. This leaves us with: Y = C + I + G We can rearrange this equation to solve for investment (I) as a function of the other variables in the economy: I = Y – C – G This equation tells us that investment in the economy will be equal to the total amount produced (GDP = Y) minus consumption spending, and government purchases. Now we can create a savings for the economy equation. The total amount of private savings (savings by the private sector meaning households and firms) is going to be equal to the amount produced (Y) plus transfer payments from the government (we will call this TR, and include things like unemployment, social security and welfare) minus the amount spend on consumption (C) and taxes (T). S(private) = Y + TR – C – T Hopefully this makes sense, the amount you save (S) will be whatever is left over (starting from initial money of Y and TR) after you account for spending and expenses (C and T). Now we need to consider public savings, which is how much the government saves. Public spending depends on the amount of taxes they receive (T), the amount they spend in purchases (G), and the amount they transfer to the population (TR). The public savings function will be: S(public) = T – G – TR We can find the total amount of savings (S) occurring in the economy by adding public savings to private savings. S(public) + S(private) = S T – G – TR + Y + TR – C – T =S Note that T and TR cancel out. This leaves us with savings (S) being equal to GDP (Y), government purchases (G), and consumption (C): S = Y – G – C If we plug in the GDP equation for Y, or substitute C + I + G for Y we get: S = C + I + G – G – C Note that C and G will cancel out leaving us with: .

The difference between these two types of inflation is found in thei.pdf

preetajain

The Federal Reserve is not a part of U.S. Government. It operates on its own and is not governed by any government policy. The only danger of directly borrowing funds from the Federal Reserve is that the U.S. Government (Treasury Department) will increase its national debt which is already on the rise from the year 2000. The yield curve is a graphic representation of interest rates for similar-quality bonds at different maturities and is as such viewed as a reflection of expectations of future interest rates. The yield curve also enables investors to compare the yields offered by bonds of short-, medium- and long- term maturities when making investment decisions. The most common shapes that the yield curve can take are represented by a normal, an inverted and a humped yield curve. When short-term interest rates are lower than long-term interest rates, the yield curve takes a normal shape. If the opposite holds, i.e. short-term interest rates are higher than long-term interest rates, the yield curve is said to be inverted. Finally, when a yield curve is humped, medium-term interest rates are higher than short-term and long-term interest rates. When the yield curve is normal, investors expect interest rates in the future to be higher. The higher interest rates would be a result economic growth and higher inflation in the future. A normal yield curve also tells investors that long-term bonds yield a higher return than short-term bonds. Hence, investors with longer investment horizons might prefer to invest in long-term rather than short-term bonds. However, taking into account expectations of inflation as reflected in the shape of the yield curve, the higher return on a long-term security will in fact give an investor lower buying power as future cash flows are discounted at higher interest rates due to inflation. Moreover, the cash invested as principal will have a substantially lower purchasing power when it is returned in the future (say in 20 years), when interest rates are significantly higher. As a means of protecting against inflation, investors might consider altering their fixed income portfolio allocations and shifting some of their holdings into securities that are immune to inflation, such as TIPS. TIPS (Treasury Inflation Protected Securities) pay a principal at maturity that is adjusted for inflation and they also pay coupons as a percentage of the adjusted principal. Solution The Federal Reserve is not a part of U.S. Government. It operates on its own and is not governed by any government policy. The only danger of directly borrowing funds from the Federal Reserve is that the U.S. Government (Treasury Department) will increase its national debt which is already on the rise from the year 2000. The yield curve is a graphic representation of interest rates for similar-quality bonds at different maturities and is as such viewed as a reflection of expectations of future interest rates. The yield curve also enables investors to compare .

The Federal Reserve is not a part of U.S. Government. It operates on.pdf

preetajain

The correct answer is Induction: Induction is the process in which one cell or tissue acts as an inducer and signals the neighbouring cells or tissues to develop. These cells are called organizers. When the eye tissue was transplanted in the tail of the tadpole; what might have occurred is that due to presences of inducer cells, they must have secreted some protein, which signalled brain to activate the neighbouring cells and start developing an eye on the tail of tadpole. Pattern formation: It is the process in which cell fate is decided based on the genes. Pattern formation is done by the genes. Pattern formation is related to the morphogenesis. Potentiation: The strength of the never impulse is increased based on the previous actions. Thus this process helps to signal the body to perform certain task with more effectiveness and encountered again. So when tadpole was transplanted with an eye tissue, they must have signalled for its development more effectively than the previous time. But the whole process of development of an eye cannot be initiated by potentiation. Positional information: the pattern formation is based on the positional information. A pattern of the embryogenesis is formed based on the information obtained from the position of the cells. So when the system is well organized, the pattern is formed based on the position of the genes. This cannot occur on our tadpole, since transplantation of eye tissue on the tail was not the information available in the genes. Solution The correct answer is Induction: Induction is the process in which one cell or tissue acts as an inducer and signals the neighbouring cells or tissues to develop. These cells are called organizers. When the eye tissue was transplanted in the tail of the tadpole; what might have occurred is that due to presences of inducer cells, they must have secreted some protein, which signalled brain to activate the neighbouring cells and start developing an eye on the tail of tadpole. Pattern formation: It is the process in which cell fate is decided based on the genes. Pattern formation is done by the genes. Pattern formation is related to the morphogenesis. Potentiation: The strength of the never impulse is increased based on the previous actions. Thus this process helps to signal the body to perform certain task with more effectiveness and encountered again. So when tadpole was transplanted with an eye tissue, they must have signalled for its development more effectively than the previous time. But the whole process of development of an eye cannot be initiated by potentiation. Positional information: the pattern formation is based on the positional information. A pattern of the embryogenesis is formed based on the information obtained from the position of the cells. So when the system is well organized, the pattern is formed based on the position of the genes. This cannot occur on our tadpole, since transplantation of eye tissue on the tail was not the information ava.

The correct answer is InductionInduction is the process in which .pdf

preetajain

Step1 Reverse the 2nd equation and add to the first equation Ste.pdf

preetajain

RNA polymerase II help in repair by protecting DNA damaged by forming tertiary complex . In eukaryotic genome strand selective repair is done by gene transcribed by RNA polymerase II . Coupling of repair of DNA governed by signal associated with RNA polymerase. RNA polymerase II is located in nucleoplasm help in repair sometime as nucleotide repair mechanism. Solution RNA polymerase II help in repair by protecting DNA damaged by forming tertiary complex . In eukaryotic genome strand selective repair is done by gene transcribed by RNA polymerase II . Coupling of repair of DNA governed by signal associated with RNA polymerase. RNA polymerase II is located in nucleoplasm help in repair sometime as nucleotide repair mechanism..

RNA polymerase II help in repair by protecting DNA damaged by formin.pdf

preetajain

prepaid expenses are devided by Total Assets.Solutionprepaid e.pdf

preetajain

Q.1) The Hardware Layer- The hardware layer is sometimes referred to as the server layer. It represents the physical hardware that provides actual resources that make up the cloud. Since, by definition, cloud computing users do not specify the hardware used to provide services, this is the least important layer of the cloud. Often, hardware resources are inexpensive and are not fault tolerant. Redundancy is achieved simply by utilizing multiple hardware platforms while fault tolerance is provided at other layers so that any hardware failure is not noticed by the users. The Virtualization Layer- Often referred to as the infrastructure layer, the virtualization layer is the result of various operating systems being installed as virtual machines. Much of the scalability and flexibility of the cloud computing model is derived by the inherent ability of virtual machines to be created and deleted at will. Infrastructure as a Service (IaaS)- The infrastructure layer builds on the virtualization layer by offering the virtual machines as a service to users. Instead of purchasing servers or even hosted services, IaaS customers can create and remove virtual machines and network them together at will. Clients are billed for infrastructure services based on what resources are consumed. This eliminates the need to procure and operate physical servers, data storage systems, or networking resources. Platform as a Service (PaaS)- The platform layer rests on the infrastructure layer’s virtual machines. At this layer customers do not manage their virtual machines, they merely create applications within an existing API or programing language. There is no need to manage an operating system, let alone the underlying hardware and virtualization layers. Clients merely create their own programs which are hosted by the platform services they are paying for. Software as a Service (SaaS)- Services at the software level consist of complete applications that do not require development. Such applications can be email, customer relationship management, and other office productivity applications. Enterprise services can be billed monthly or by usage, while software as service offered directly to consumers, such as email, is often provided for free. The Client Layer- While this layer is not a cloud computing service, it is an essential part of the model. The client layer acts as the user interface to which cloud computing services are delivered. Client layer hardware can include personal computers, web browsers, mobile devices, and even telephones. Q.2) PaaS is designed for companies who have either an application or a set of applications and wants to deploy those applications over the cloud. In this situation, a PaaS provider with computer programming compatibility is the best solution. This gives you the following opportunities: Q.3) Answered in above question. Q.4) Public Cloud With the public cloud, the infrastructure and services through which you process or store inform.

Q.1) The Hardware Layer-The hardware layer is sometimes referred t.pdf

preetajain

NO2^- involves 2 bonds (one is N-O single bond, the other is N=O dou.pdf

preetajain

No ,the staetement is not correctReason We calculate CI for.pdf

preetajain

an atom does not have a charge an ion has a charge because it has more or fewer electrons than protons. a molecule is the smallest part of a covalent compound (where the electrons are shared) It also refers to a diatomic molecule where 2 atoms of the same atom share electrons. A compound is the chemical combination of 2 or more elements by giving taking or sharing electrons. K gets a +1 charge as it gives away an electron H gets a +1 charge as it gives away an electron S gets a -2 charge has it takes 2 electrons. Compounds do not have charges Therefore the formula must be KHS Solution an atom does not have a charge an ion has a charge because it has more or fewer electrons than protons. a molecule is the smallest part of a covalent compound (where the electrons are shared) It also refers to a diatomic molecule where 2 atoms of the same atom share electrons. A compound is the chemical combination of 2 or more elements by giving taking or sharing electrons. K gets a +1 charge as it gives away an electron H gets a +1 charge as it gives away an electron S gets a -2 charge has it takes 2 electrons. Compounds do not have charges Therefore the formula must be KHS.

an atom does not have a charge an ion has a charg.pdf

preetajain

9Solution9.pdf

preetajain

Macula lutea is situated laterally to the optic disc. It is a small .pdf

preetajain

Keratin 5, otherwise called KRT5, K5, or CK5. it , is a protein that is encoded in people by the KRT5 quality. It dimerizes with keratin 14 and structures the moderate fibers (IF) that make up the cytoskeleton of basal epithelial cells. This protein is included in a few illnesses including epidermolysis bullosa simplex and bosom and lung growths Keratin 5, as different individuals from the keratin family, is a middle fiber protein. These polypeptides are portrayed by a 310 buildup focal pole area that comprises of four alpha helix fragments (helix 1A, 1B, 2A, and 2B) associated by three short linker areas (L1, L1-2, and L2). The closures of the focal pole area, which are known as the helix start theme (HIM) and the helix end theme (HTM), are exceptionally monitored. They are particularly essential for helix adjustment, heterodimer development, and fiber arrangement. Lying on either side of the focal bar are variable, non-helical head and tail districts which distend from the IF surface and give Secondary structures of keratins : The areas of the -helical spaces (1A, 1B, 2A and 2B) in the focal bar of a keratin subunit. The areas of the -helical spaces (1A, 1B, 2A and 2B) in the focal bar of a keratin subunit. The principal model of alpha-helix was proposed by Pauling in view of the crystallography of fleece strands . that were appeared to have long helical fragments. Examination of the main cytoskeletal keratin succession uncovered that this protein contains a focal space of ~310 buildups that was anticipated to be for the most part in -helix compliance .. By relative examination of the anticipated structures of a sort I keratin, a sort II keratin, desmin and vimentin, Hanukoglu and Fuchs recommended that all IF proteins have a focal ~310 buildup space that contains four fragments in -helical adaptation that are isolated by three short linker sections anticipated to be in beta-turn compliance .. This model has been affirmed by investigation of the gem structure of portions of keratin curled loop . The structures of the head and tail spaces of keratins are exceptionally factor and have not been clarified. In view of their arrangements, these spaces are anticipated to be non-helical, likely framing globular structures that partake in associations amongst subunits and different proteins in the framework of cell cytoskeleton . Keratin strands are hard to solubilize thus far it has not been conceivable to take shape an entire keratin or a blend of keratin polymers. Even with this trouble, dissolvable sections of keratins have been produced both by proteolytic absorption and quality building to concentrate on the auxiliary properties of keratins . As noted above, keratin fibers are made out of hetero-dimers. To express the long 2B portion of hetero-dimer of keratins K5 and K14, Lee et al. changed two cDNAs into E. coli, segregated the heteromeric complex, and solidified it. Basic investigation uncovered a curled loop hetero-dimer structure of K5 an.

Keratin 5, otherwise called KRT5, K5, or CK5. it , is a protein that.pdf

preetajain

Internel microprocesser as it is ,is not a embedded system because, an embedded embedded system will have a specific or dedicated function within a larger system. Internal microprocessor is a component of embedded system . Solution Internel microprocesser as it is ,is not a embedded system because, an embedded embedded system will have a specific or dedicated function within a larger system. Internal microprocessor is a component of embedded system ..

Internel microprocesser as it is ,is not a embedded system because, .pdf

preetajain

import tio.*; class TicTacToe { static final int EMPTY = 0; static final int NONE = 0; static final int USER = 1; static final int COMPUTER = 2; static final int STALEMATE = 3; public static void main(String[] args) { int turn = USER; int[][] board = new int[3][3]; int move; int winner; System.out.println(\"This is a tic-tac-toe game\"); System.out.println(\"You are playing against the computer!\"); System.out.println(\"Enter 1-9 to indicate your move\"); print_board(board); while(true) { if(turn == USER) { System.out.println(\"Your move\"); move = -1; while (move<0 || move>9 || board[move/3][move%3] != EMPTY) { System.out.println(\"Please enter your move(0-9): \"); move = Console.in.readInt(); Console.in.readChar(); } } else { move = computer_move(board); System.out.println(\"Computer move: \" + move); } board[(int)(move/3)][move%3] = turn; print_board(board); winner = checkWinner(board); if(winner != NONE) break; if(turn == USER) { turn = COMPUTER; } else { turn = USER; } } switch(winner) { case USER: System.out.println(\"You won!\"); break; case COMPUTER: System.out.println(\"Computer won!\"); break; default: System.out.println(\"Tie!\"); break; } } public static void print_board(int[][] board) { System.out.print(printChar(board[0][0])); System.out.print(\"|\"); System.out.print(printChar(board[0][1])); System.out.print(\"|\"); System.out.println(printChar(board[0][2])); System.out.println(\"-----\"); System.out.print(printChar(board[1][0])); System.out.print(\"|\"); System.out.print(printChar(board[1][1])); System.out.print(\"|\"); System.out.println(printChar(board[1][2])); System.out.println(\"-----\"); System.out.print(printChar(board[2][0])); System.out.print(\"|\"); System.out.print(printChar(board[2][1])); System.out.print(\"|\"); System.out.println(printChar(board[2][2])); } public static char printChar(int b) { switch(b) { case EMPTY: return \' \'; case USER: return \'X\'; case COMPUTER: return \'O\'; } return \' \'; } public static int checkWinner(int[][] board) { if((board[0][0] == board[0][1]) && (board[0][1] == board[0][2])) return board[0][0]; if((board[1][0] == board[1][1]) && (board[1][1] == board[1][2])) return board[1][0]; if((board[2][0] == board[2][1]) && (board[2][1] == board[2][2])) return board[2][0]; if((board[0][0] == board[1][0]) && (board[1][0] == board[2][0])) return board[0][0]; if((board[0][1] == board[1][1]) && (board[1][1] == board[2][1])) return board[0][1]; if((board[0][2] == board[1][2]) && (board[1][2] == board[2][2])) return board[0][2]; if((board[0][0] == board[1][1]) && (board[1][1] == board[2][2])) return board[0][0]; if((board[0][2] == board[1][1]) && (board[1][1] == board[2][0])) return board[0][2]; if(board[0][0] == EMPTY || board[0][1] == EMPTY || board[0][2] == EMPTY || board[1][0] == EMPTY || board[1][1] == EMPTY || board[1][2] == EMPTY || board[2][0] == EMPTY || board[2][1] == EMPTY || board[2][2] == EMPTY) return NONE; return STALEMATE; } // Generate a random computer move public static int c.

import tio.;class TicTacToe {static final int EMPTY = 0;stati.pdf

preetajain

first balance Ca on both sides,as they are equal, next balance hyd.pdf

preetajain

More from preetajain (20)