1. How to Replace the Windows in a 1950s
Ranch-sty

2. Home Decoration magazine

3. Introduction
Homeowners looking to update or remodel their
homes usually try to be loyal to the original design of the
home. While this is required in many areas for homes on a
historic register, for most homeowners it's optional. It's
possible to stay true to the original design with modern
materials and fixtures. No place is this more true than with
windows.

4. Introduction
Modern windows are much more energy efficient than those of
half a century ago. They also come in a wide array of sizes and
styles, so it is possible to have modern windows without
compromising on design. Ranch-style homes generally feature
large, plate-glass windows, including picture windows; an
assistant's help may come in handy installing the larger windows

5. What Things will you need?
• Caulking gun.
• Caulking tools.
• Square.
• Measuring tape.
• Screwdriver.
• Hammer.
• Replacement windows.
• Gloves.
• Assistant (optional).

6. Instructions
1. Remove the old windows and recycle them.

7. Instructions
2. Measure for the new windows. Measure
inside the jamb from side to side and top to
bottom.

8. Instructions
3. Clean the window jamb and repair any holes
with putty. Lightly sand the filled holes after
the putty dries.

9. Instructions
4. Prepare the new window. Check the fit of
your new window by placing it into the
opening. Move the window sashes to the
center. Move the bumper stops to the center
and find the mounting holes on the four sides.

10. Instructions
5. Caulk both sides of the window. Caulk the
inside of the jamb's outside stops. Caulk and
install the sill angle. Place the header on top
of the window, screw into place and caulk.

11. Instructions
6. Install the new window. If necessary, tap in shims
to ensure squareness. all corners must be square.
Screw in mounting screws to the top and bottom.
Adjust the header to eliminate any space
between the window and frame then secure it
with screws. While there is no trick to using
shims, when necessary start at the nearest
available point that is off-square. Light tapping
should be all that is necessary to insert the shims.

12. Instructions
7. Check that the sashes move easily. Adjust as
necessary. Caulk the inside of the windows
and add the inside stops.

13. Thanks for visiting us
www.pouted.com