The document provides specifications for the Micronector 210, a 2mm pitch connector for printed circuit boards. It is made of thermoplastic and copper alloy contacts, and is designed for low intensity applications in severe environments. It comes in single and double row configurations with 2 to 34 contacts. It has mechanical, electrical, and climatic specifications listed. The document also provides ordering information, mold sizes, termination styles, and PCB layout recommendations.
2. Materials
• Insulator body ................................................................... Thermoplastic class UL 94 V0
• Contacts ........................................................ Copper alloy plated hard acid gold on nickel
Characteristics
Mechanical
• Mechanical endurance...................................... 500 mating/unmating without latch
• Mating/unmating forces....................................................... 1 N max., 0,2 N min.
• Contact retention................................................................................. 10 N min.
• Climatic category....................................................................... - 55° C/+ 150° C
• Temperature max. 1 minute.................................................................... + 250° C
• Sinusoïdal vibrations ................................... 10-2000 Hz (10 g), 6 hours endurance
• Bump severity .................................................................................. 4000 (40 g)
• Shock............................................................................................... 100 g 6 ms
• Acceleration severity .................................................................................... 50 g
Electrical
• Density per individual contact...................................................3,3 A max. at 25° C
............................................................................................2,6 A max. at 85° C
• Density per contact, all loaded contacts ................................... 3 A max. at 25° C
............................................................................................2,2 A max. at 85° C
• Working voltage (at sea level) .................................................120 Vdc or Vac peak
• Proof voltage (at sea level) .....................................................360 Vdc or Vac peak
• Initial contact resistance.....................................................................10 mΩ max.
• Contact resistance after conditioning ...................................................13 mΩ max.
• Initial insulation resistance ..............................................................1000 MΩ min.
• Insulation resistance after conditioning ...............................................100 MΩ min.
Standard
Specification BS 9525 - F0033
Micronector 210 is a 2 mm pitch connector for printed-circuit, created for low intensity applications.
Its small mass allows a self-using in severe environment.
Its low profile allows a miniatured layout.
Available on :
• Single row (serie 211) from 2 to 17 way in 7 sizes
• Two rows (serie 212) from 4 to 34 way in 11 sizes.
MICRONECTOR 210 - 2 MM PITCH
2
Nota : All sizes are in millimetres.
3. 3
Series
Single row : 211
Two rows : 212
Genre
Female : F
Male : M
Number of L.F. contacts
Single row : 2 – 3 – 4 – 5 – 6 – 7 – 17
Two rows : 4 – 6 – 8 – 10 – 12 – 14 – 16 – 18 – 20 – 26 – 34
Termination styles
Straight on P.C.B. male or female : T (*)
Straight on P.C.B. male : X - Y
Straight on P.C.B. short female : N
Right angle on P.C.B. male : L (*)
Straight SMT male or female : R (*)
Crimp 24-28 AWG female : C
Crimp 22 AWG female : D
Termination finish
Gold, crimp female contacts : 01
Tin alloy, solder contacts : 03
Guides
Without latch : U
With latch : L
(*) Option : retaining strap ref. MP 6759 separately available.
Ordering information for crimping female termination
24-28 AWG : B741 C01
22 AWG : B741 C03
M212 16 T 03 U
ORDERING INFORMATION
MOULD SIZES
Contact arrangement
single row 2 3 4 5 6 7 - - - - 17
Contact arrangement
Two rows 4 6 8 10 12 14 16 18 20 26 34
A 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 24.0 32.0
B 7.6 9.6 11.6 13.6 15.6 17.6 19.6 21.6 23.6 29.6 37.6
C 8.1 10.1 12.1 14.1 16.1 18.1 20.1 22.1 24.1 30.1 38.1
D 7.3 9.3 11.3 13.3 15.3 17.3 19.3 21.3 23.3 29.3 37.3
Termination styles T Y X N
E 2.9 5.35 9.35 1.1
4. 4
WIRES
MINIMUM SPACING
CMSminimal gap
8.35 min.
spacing between
adjacent P.C.B. hole drillings
extraction claw
7.4/7.6
7.9
2mm±0.151.1mm max.
Termination styles Crimp barrel Wire size/Crimp tool setting
accomodation 22 AWG 24 AWG 26 AWG 28 AWG
C 24-28 AWG - 7 6 6
D 22 AWG 6 - - -
CONTACT ARRANGEMENT
Male connector (viewed from mating face)
17 1
17 1
34 18
5. 5
MALE CONNECTORS
Right angle on P.C.B. - type L
8.55
A
B (latch not fitted)
C (latch fitted)
5.6
6.15
4.0
2.0
2.0
6.0
3.1 nom.
8.55
6.15
4.6
Retaining
strap
2.6 min
4.75 nom.
Straight on P.C.B - types T – X – Y
E E
A
B (latch not fitted)
C (latch fitted)
4.0
2.0 2.0
6.0
5.56
8.91
Straight SMT - type R
Termination styles E
T 2.90
X 9.35
Y 5.35
1.21.2
5.65
93.60
6
12
3 2
C=16 4.75
A=10
1
7
8.1
6. 6
FEMALE CONNECTORS
Straight on P.C.B. - types T - N
Ø 0.52 A
D3.5
2.0
2.0
2.1
0.33
nom.
5.5
E
5.2
Crimp on wire - types C - D
Straight SMT - type R
A
D3.5
2.0
2.0
4.9
5.5
8.15
Termination styles E
T 2.90
N 1.10
1.5
1.5
5.5
5.3
8.5
(2 rows only)
7. 7
TOOLS
P.C.B. LAYOUTS
Crimping tool
ref. M22520/2-01
Connectors fit out with type L contacts
Connectors fit out with type X - Y - N contacts
0.5
2.25
n holes Ø 0.70/0.80
4 holes Ø 1
Ø 0.10 M
2.25A
4.75
1.4/1.8
A = 18.5
4 3 2 1
0.8 2 mm pitch
Holes for retaining strap - Make 2 solder
preforms Ø 1,8 on rear face
2.25
2.38
4.75
4.04.0
0.5
2.25
(nx2) holes Ø 0.70/0.80
4 holes Ø 1.0/1.1
(Only Ø 1.1/1.0 mm, type L holes)
PCB edge
Ø 0.10 M
2.25A
4.75
2.0
1.4/1.8
Ø 0.10 M
SINGLE ROW TWO ROWS
Connectors fit out with type R contacts Connectors fit out with type L contacts
Contacts extraction tool
ref. MP6816
Locator
ref. MP 6818
+ 10
- 8
nx2 holes Ø 0.7 + 0.1
0
4 holes Ø 1.1 0
- 0.1
2.25
0.1 M
4.75
1.6
2
2.25A=8
PCB edge
Contacts insertion/extraction tool
ref. 220SO3