1. Sismik Hız ve Tektonik İlişkisi
Jeofizik Mühendisliği Bölümü
İstanbul Üniversitesi
Prof. Dr. Ali Osman Öncel
aliosman.oncel@gmail.com
Saha SismolojisiSaha Sismolojisi
http://www.istanbul.edu.tr/mb/fieldGeo/sismoloji.htmlhttp://www.istanbul.edu.tr/mb/fieldGeo/sismoloji.html
20. Kıtasal Açılmanın Olduğu
Yerlerde Kabuk Neden
İncelir?
Kabuk Kalınlığı Çalışması
Nasıl Yapılır, ve Kabuk
Derinliklerinin Değişiminin
Bilinmesi Neden Önemlidir?
Kabuk Nerede İncelir veya Kalınlaşır?
34. 1. Asgari Birim Fiyat Listesi Ne Demektir?
2. Sismik Kırılma Neden Olur?
3. Hızın Derinlikle Artmaması Sismik Kırılma Çalışmalarını Nasıl Etkiler?
4. Tabaka Süreksizliği Nedir ve Ölçülere Nasıl Etki Eder?
5. Veri Sayısının Artmasına Bağlı Olarak Tabaka Modeli Neden Değişir?
6. Levha Sınırlarında Ne Oluyor ve Nasıl Anlarız?
7. Okyanuslarda ki Levha Sınırlarının Topoğrafik Yapısı Nasıldır?
8. Tektonik özelliklerin Değişimiyle P-dalga Hız Değişimleri Nasıl
İlişkilidir?
9. P-dalga Hızı (km/s) Neden, Nerede ve Nasıl Değişiyor?
10. Tektonik özelliklerin Değişimiyle P-dalga Hız Değişimleri Nasıl
İlişkilidir?
11. Kabuk Nerede İncelir veya Kalınlaşır?
12. Sismik hız değişimleriyle tektonik model nasıl oluşturulur?
13. Sismik hız değişimlerine bağlı olarak tektonik özellikler nasıl açıklanır?
14. Moho derinliğinin tektonikle değiştiği yerler ve özellikleri nelerdir?
Genel Değerlendirme
Editor's Notes
Gerçek
Objektif Sına
A. Different portions of the wave front reach the velocity boundary earlier than other portions, speeding up or slowing down on contact, causing distortion of wave front.
Dalga Cephesi
A slower layer beneath a faster layer will not be detected by seismic refraction. Seismic Refraction requires that velocities increase with depth. The presence of a velocity inversion can lead to errors in depth calculations.
Veri Sayısına Bağlı Olarak Tabaka Yapısı Hakkında Görüntü Nasıl ve Neden Değişmektedir?
P wave velocity image for the crustal structure. The section is obtained by a tomographic inversion method in the analytical line from the western Fukushima through Echigo Plain, Sado Island and Toyama Trough to Yamato Trough. Faults are distinguished into earlier normal faults (blue) and later inverted reverse faults (red). Note their distinctive distribution. Compiled from [63].
http://www.intechopen.com/books/mechanism-of-sedimentary-basin-formation-multidisciplinary-approach-on-active-plate-margins/tectonic-process-of-the-sedimentary-basin-formation-and-evolution-in-the-late-cenozoic-arc-arc-colli
P-wave perturbation structures beneath the central Japan. This section image obtained by high-density seismic stations by seismic tomography using a viewer software developed by NIED to estimate the 3D seismic velocity structure typical of under Japan. Data are quoted from [73]. Tohoku and Seinan arcs are distinctive in rheology structure due to difference in plate configuration.
Reference: http://www.intechopen.com/books/mechanism-of-sedimentary-basin-formation-multidisciplinary-approach-on-active-plate-margins/tectonic-process-of-the-sedimentary-basin-formation-and-evolution-in-the-late-cenozoic-arc-arc-colli
Continental Rifting eventually open
an Ocean Basin
A Continental Rift can be Viewed as the On-land Continuation of a Mid-Ocean Ridge
A Continental Rift can be Viewed as the On-land Continuation of a Mid-Ocean Ridge
CONVERGENT PLATE BOUNDARY
Continental Collision Okyanus kapanıyor ve kıtalar çarpışıyor.