Retinoscopy is a technique used to objectively determine a patient's refractive error without their input. It involves using a retinoscope to observe the light reflex in the pupil when it is illuminated. The observer notes whether the reflex moves with or against the motion of the retinoscope, indicating whether plus or minus lenses are needed to neutralize the reflex. Additional steps are taken to determine any cylindrical error by observing the reflex in different meridians and neutralizing them with spherical and cylindrical trial lenses. The objective refraction obtained via retinoscopy provides a starting point for subjective refraction to obtain the patient's best-corrected vision.
1. RETINOSCOPY
MS. NISHITA AFRIN
ASST. COORDINATOR, DEPARTMENT OF PUBLIC HEALTH OPHTHALMOLOGY (UNISA)
MPH IN COMMUNITY OPHTHALMOLOGY (UNISA)
B.OPTOM (ICO)
4. Objective and Subjective Refraction
Required Tools
Retinoscope
Trial box with
trial lens and
trial frame
Vision Chart
5. OBJECTIVE REFRACTION
WHEN THE REFRACTIVE ERROR OF AN EYE IS DETERMINED WITHOUT INPUT BY
THE PATIENT
1. RETINOSCOPE
2. AUTO-REFRACTOR
6. SUBJECTIVE REFRACTION
SUBJECTIVE REFRACTION IS A TECHNIQUE TO DETERMINE, THE COMBINATION
OF LENSES THAT WILL PROVIDE THE BEST CORRECTED VISUAL ACUITY
8. RETINOSCOPY
Retinoscope: An apparatus that determines the refractive power of the eye by
observing the lights and shadows on the pupil when a mirror illumines the
retina;
Retinoscopy: Is a technique to obtain an objective measurement of the refractive
error of a patient's eyes.
10. REQUIRED POSITION:
1. PATIENT TO VISUAL ACUITY (TARGET ACUITY) CHART DISTANCE 6M OR 20 FEET OR 3
M OR 10 FEET (WITH MIRROR)
2. PATIENT’S EYE LEVEL = OBSERVER’S EYE LEVEL/ PATIENT’S SHOULDER LEVEL =
OBSERVER’S SHOULDER LEVEL
3. OBSERVER TO PATIENT DISTANCE = 50 CM (WD= +2.00 D/ 67 CM (WD=+1.50 D)
4. PATIENT’S RIGHT EYE (BUT BOTH EYES SHOULD BE OPENED) = OBSERVER’S RIGHT EYE
(LEFT EYE CLOSED)
PATIENT’S LEFT EYE (BUT BOTH EYES SHOULD BE OPENED) = OBSERVER’S LEFT EYE
(RIGHT EYE CLOSED)
11. PATIENT TO VISUAL ACUITY (TARGET ACUITY) CHART DISTANCE
6M OR 20 FEET OR 3 M OR 10 FEET (WITH MIRROR)
12. PATIENT’S EYE LEVEL = OBSERVER’S EYE LEVEL/ PATIENT’S
OR SHOULDER LEVEL = OBSERVER’S SHOULDER LEVEL
Same Eye Level
13. OBSERVER TO PATIENT DISTANCE = 50 CM (WD= +2.00 D/ 67 CM
(WD=+1.50 D)
Same Eye Level
Patient to observer
distance 50 cm/ 67
cm
14. PATIENT’S RIGHT EYE (BUT BOTH EYES SHOULD BE OPENED) = OBSERVER’S RIGHT
EYE (LEFT EYE CLOSED)
PATIENT’S LEFT EYE (BUT BOTH EYES SHOULD BE OPENED) = OBSERVER’S LEFT
EYE (RIGHT EYE CLOSED)
Same Eye Level
Patient to observer
distance 50 cm/ 67
cm
Pt’s RE
Ob’s RE
Pt’s LE closed
18. CHARACTERISTICS OF REFLEX
LOW POWER = SPEED, BRILLIANCE , WIDTH (Divided the pupil in 4 vertical sections- measure how much have
to fill)
HIGH POWER= SPEED, BRILLIANCE, WIDTH (Divided the pupil in 4 vertical sections- measure how much have
to fill)
Low Power
o Speed
o Brilliance
o Width
Medium Power
o Speed
o Brilliance
o Width
High Power
o Speed (Depends on power)
o Brilliance (Depends on power)
o Width (Depends on power)
19. WITH MOTION = PLUS LENS
With Motion
(speed ,
width 2/4,
Brilliance )
Need Plus
Correction
Till some With Motion
(speed , width 3/4,
Brilliance )
+1.50 Ds given but
needed more Plus
Correction to neutralize
No Motion found-
Neutral point (speed- no
movement, width 4/4,
Brilliance )
+2.00 Ds placed to
neutralize
20. AGAINST MOTION = MINUS LENS
Against Motion
(speed , Brilliance
(relatively dull
reflex)
Need Minus
Correction
Till some Against Motion
(speed , Brilliance )
-2.00 Ds given but
needed more Minus
Correction to neutralize
No Motion found-
Neutral point (speed- no
movement, Brilliance )
-2.50 Ds placed to
neutralize
21. CYLINDER POWER REFLEX (AXIS
IDENTIFICATION)
Observe break Match the Retinoscopic Reflex with
the break (match in a line). Observe
axis as well
When the break properly aligned with
the retinoscopic reflex, it will be most
thinnest and brightest to look
Also observe 90 degree apart
meridian to find out the more with
motion or less against motion
meridian
If first axis is less then 90, add 90
with it to find another axis
If first axis is more then 90,
subtract 90 from it to find another
axis
90
180
90
180
22. CYLINDER POWER REFLEX CORRECTION
Sphero-cylidrical method (plus and minus lenses placed based on motion direction). First meridian must correct with
spherical lenses (either plus or minus spherical lenses depends on the motion type) and also place cylindrical lens on
another meridian over the previously corrected spherical lens (either plus or minus spherical lenses depends on the
motion type)
1. Observe
break
2. Match the Retinoscopic Reflex with the break (match
in a line). Observe axis as well
When the break properly aligned with the Retinoscopic
reflex, it will be most thinnest and brightest to look
3. Also observe 90 degree apart meridian to find out the
more with motion or less against motion meridian
If first axis is less then 90, add 90 with it to find
another axis
If first axis is more then 90, subtract 90 from it to find
another axis
4. First meridian must correct with spherical
lenses (either plus or minus spherical lenses
depends on the motion type)(more with motion
preferred first)
45 meridian corrected with +1.00 spherical
lens
Now have to check the 90 apart axis 135
90
180
90
180
2 & 3
1 4
23. CYLINDER POWER REFLEX CORRECTION (CONTINUE)
Sphero-cylidrical method (plus and minus lenses placed based on motion direction). First meridian must correct with spherical
lenses (either plus or minus spherical lenses depends on the motion type) and also place cylindrical lens on another meridian
over the previously corrected spherical lens (either plus or minus spherical lenses, it depends on the motion type)
6. Placed cylindrical lens on another meridian over the
previously corrected spherical lens (either plus or minus
spherical lenses, it depends on the motion type)
Rotate the Retinoscopic sleeve to confirm neutralization
(examine all the meridians)
Finally, the actual power is -1.00 DS/-1.00 DC × 135
(+2.00 D working distance only reduce from spherical
+1.00 D)
6
Spherical
lens
Cylinder lens
over spherical
lens
5. 135 degree now shows against motion
(without any lens it shows with motion) over
spherical +1.00 D lens.
So we have to place minus cylinder in 135 axis
to neutralize
5