1. 1 | P a g e
CV MUCHLIS SIREGAR
C U R R I C U L U M V I T A E
PERSONAL PARTI CULARS
Name : MUCHLIS.SIREGAR
NRIC : 2171122704750001 (Age : 40)
Company : HYDRATIGHT
Address : Perumahan MutiaraBiru Block A.30 BATAM
Tel : 0813 7223 6751
Email : muchliss33@gmail.com
*DOCUMENT ATTACHED
NO NAME OF DOCUMENT NUMBER PLACE,DATE OF ISSUED DATE OF EXPIRE
1 PASSPORT A2009410 BATAM,08 FEB 2012 08 FEB 2017
2 ID CARD 2171122704750001 BATAM, 02 OCT 2012 27 APRIL 2017
3 IDENTIFY PHOTO 3 X 4
4 CERTIFICATE
SUMMA R Y OF EXPE R IE N C E
I’ve worked in oil and gas project,andi do can bolting test ,and I familiar with material piping, structure ,E&I and
valves material and reference the below my experience.
Flange Management, Machining and Hydraulic/Manual Bolt tightening, Torquing & Tensioning
Joint ,bolt and gasket preparation
Ensure high standards of safety and quality are followed
Verification of Dimension before and after Welding as per special requirements
Monitoring Weld joint preparation
Perform fit-up inspection during shop fabrication & erection on structures and piping.
Re-instatement of various piping system completions and clearance of Punch lists
EDUC A TIO N
1997 : POLYTECHNIC CHIBA AT JAPAN
1994 : SMA TAMAN SISWASIANTAR
INDU S TR IA L SHOR T COU R S E S
2016 HYDRATIGHT COMPETION (QATAR -UEA)I
2015 HIRA (BATAM - INDONESIA)
2015 OHSAS 18001 (BATAM - INDONESIA)
2013 High Pressure Jetting by IKM Testing Asia (BATAM - INDONESIA)
2010 Bolting Controlled and flange management (JAKARTA – INDONESIA)
2009 Internal Audit Upgrade (iso9001:2008) (BATAM – INDONESIA)
1999 Quality and Environmental Audit (BATAM – INDONESIA)
1997-1999 Mechanical training IMM (Japan) (OSAKA – JAPAN)
2. 2 | P a g e
CV MUCHLIS SIREGAR
WOR K IN G EXPE R IE N C E
Period : March 2016 – April 2016
Company : HYDRATIGHT PROJECT SHUT DOWN AT SHELL LARAS LAFFAN
QATAR
Designation : LEAD BOLTING TECHNICIAN
Duties
Loosening and tightening bolting as required client
Joint , Bolt and Gasket Preparation
Check number the stud bolt and nuts for identification and control as procedure
Lubricate the threaded area of stud and nut and lubricate face of nut in contact with the flange
Set up torque wrench 30% ,70% until 100%
Make sure tightening base on work packaged
WOR K IN G EXPE R IE N C E
Period : Feb 2016 – April 2016
Company :
HYDRATIGHT PROCEE PROJECT SHUT DOWN AT SHELL QATAR
GAS LARAS LAFFAN
Designation : LEAD BOLTING TECHNICIAN
Duties
Loosening and tightening bolting as required client
Joint , Bolt and Gasket Preparation
Check number the stud bolt and nuts for identification and control as procedure
Lubricate the threaded area of stud and nut and lubricate face of nut in contact with the flange
Set up torque wrench 30% ,70% until 100%
Make sure tightening base on work packaged
Period : Oct 2015 –Dec 2015
Company :
HYDRATIGHT PROCEE PROJECT SHUT DOWN AT
PETRORABIGH SAUDI ARABIA
Designation : LEAD BOLTING TECHNICIAN
Duties
Loosening and tightening bolting as required client
Joint , Bolt and Gasket Preparation
Check number the stud bolt and nuts for identification and control as procedure
Lubricate the threaded area of stud and nut and lubricate face of nut in contact with the flange
Set up torque wrench 30% ,70% until 100%
Make sure tightening base on work packaged
WOR K IN G EXPE R IE N C E
Period : JAN 2014 ~ Sept 2015
Company :
VME PROCEE PROJECT ARAMCO , YUCAL (TAOTAL) , HYUNDAI ,
MODEC , E-HOUSE , OCTP FPSO YINSON and BUMI ARMADA
Designation : BOLTING TECHNICIAN
Duties
Joint , Bolt and Gasket Preparation
Check number the stud bolt and nuts for identification and control as procedure
Lubricate the threaded area of stud and nut and lubricate face of nut in contact with the flange
Set up torque wrench 30% ,70% until 100%
Ensure high standards of safety and quality are followed
3. 3 | P a g e
CV MUCHLIS SIREGAR
WOR K IN G EXPE R IE N C E
Period : April 2013 ~OCT2013
Company :
PT.ORINZA INTERNATIONAL PROJECT CHEVRON AND TANK
STORE
Designation : ASSY QC
Duties
Verification of Dimension before and after Welding as per special requirements
Monitoring Weld joint preparation
Perform fit-up inspection during shop fabrication & erection on structures and piping.
Re-instatement of various piping system completions and clearance of Punch lists
Witnessing of air test, vacuum test and hydro test on structures.
Period : Aug 2011 ~ DEC 2011
Company : PT.SWIFT
Designation : Bolting Technician
Duties
Joint , Bolt and Gasket Preparation
Check number the stud bolt and nuts for identification and control as procedure
Lubricate the threaded area of stud and nut and lubricate face of nut in contact with the flange
Set up torque wrench 30% ,70% until 100%
Ensure high standards of safety and quality are followed
Period : Nov 2008~ July 2009
Company : PT,McDermott Indonesia
Designation : FITTER
Period : Sept1997~Sept1997
Company : IKEKOUGYO JAPAN
Designation : TECHNICIAN (TRAINING)
LIST OF NOTABLE PROJECT WORKED
Period
:
Feb-2016~April -2016
Designation : Bolting Technician
Project : Shut downat QATARSHELL GAS RAS LAFFAN
Scope : FieldServiceEngineer
Period
:
Oct-2015~Dec -2015
Designation : Bolting Technician
Project : Shut downat Petro Rabight SaudiArabia
Scope : Technicalboltingandtorque FieldServiceEngineer
4. 4 | P a g e
CV MUCHLIS SIREGAR
Period July -2014~ June-2015
Designation : Bolting Technician
Project : AramcoWasit MEG
Scope : Technicalboltingandtorqueservice in Equipment Pipingandvalve installation,
Client : (GasCleaningUnit,Heat ExchangerandPumps)
Client : Aramco
Period : Sept -2014~ March-2015
Designation : Bolting Technician
Project : ProducerWater TreatmentH2O
Scope : Technicalboltingandtorqueservice in Equipment Pipingandvalve installation,
Client : (GasCleaningUnit,Heat ExchangerandPumps)
Period : April 2013 ~ Oct-2013
Designation : Assistance QC
Project : TANKSTORE
Scope : Fabricated Piping
Client : PT.ROTARYENGINEERING
Period : Aug-2011 ~ Sept-2012
Designation : Technician
Project : Naga&Pelikan
Scope : Steel Structureand Pipingand EquipmentInstallation
Client
:
CHEVRON
Period : Jul-2008~ Nov-2009
Designation : FITTER
Project : CHEVRON
Scope : Steel Structureand Pipingand EquipmentInstallation
I assert that the informationgivenabove are true and accurate,anywrongnews andfacts willcapableto
disqualificationifappointdepositionwithoutnoticefrom your company.
Sincerely Yours,
Muchlis Siregar