This document provides interior specifications for living room, master bedroom, kitchen, and notes for a home in Pune Kolhapur. The living room specifications include a 3+4+1 seater sofa set, 6 seater dining table with chairs, and center table. The master bedroom specifications include an uphift storage bed, side table, leather headboard, wardrobe, and false ceiling. The kitchen specifications describe the main platform trolly, service platform shutter, overhead cabinets, and notes on surface finishes, accessories, and materials used.
1. Pune Kolhapur
Interior Specifications
Living Room
Sofa Set
3 Seater + 4 Seater + Lounger
* Framing Of Devdar Wood & Seating And Back 40 Density Foam With Spring & Soft Foam.
Dining Table 6 Seater
* Sagoun Table With Glass Top & 6 Chair With Base Seating of Foam & Fabric/ Leather.
Center Table
* Table & Drawer With Glass Top Made From 18mm MR Plywood Finish With 1mm Designer
Laminate.
TV Unit
* Providing & Fixing with 12mm MR Plywood Panelling & 18mm Plywood Base Unit With
Drawer Finish With 0.8mm White Laminate Inside & 1mm Designer Laminate Outer Side
(1600/ sheet)
Contact : 7038957324 Ar.Santosh V Chougule
2. Pune Kolhapur
Master Bedroom
Bed With Storage
* Providing and Fixing Bed Up Lift Hydrolic of 18mm MR Grade Plywood Finish With 0.8mm
White Lam. Inside, 1mm Designer Lam. Outside (1600/ sheet)
Side Table
* Providing and Fixing Side Table With 1 Drawer of 18mm MR Grade Plywood Finish With
0.8mm White Lam. Inside, 1mm Designer Lam. Outside (1600/ sheet).
Bed Leather Headboard
* Providing and Fixing Leather Headboard Of 12mm MR Grade Plywood Finish With 38mm
Foam & 850 Rs/ Mtr Leather Fabric.
Wardrobe
* Providing and Fixing of TeakWood Framing & Shutter of 25mm MR Grade Block board
Finish With 0.8mm White Lam. Inside, 1mm Designer Lam. Outside (1600/ sheet) and
operating with Sliding Channel/ Openable With 2 Drawers.
false celling
material gypsm sheet
12mm thk…sheet size 6'x4' , GI chanel patti for framing
Contact : 7038957324 Ar.Santosh V Chougule
3. Pune Kolhapur
Kitchen
Kitchen Main Platform Trolly
* Providing and Fixing of 9 Basket of SS 304 with SS Framing & 18mm BWR Grade Plywood
Finish With 0.8mm White Lam. Inside, 1mm Designer Lam. Outside (1600/ sheet) Operating
With Handle of Aluminium G Profile.
Kitchen Service Platform Shutter
* Providing and Fixing of Teak Wood Framing & 18mm MR Grade Plywood Finish With
0.8mm White Lam. Inside, 1mm Designer Lam. Outside (1600/ sheet) Operating With
Handle of Alu. G Profile.
Service Platform Over Head Cabinate
* Providing and Fixing of 18mm MR Grade Plywood Finish With 0.8mm White Lam. Inside, 1mm
Designer Lam. Outside (1600/ sheet) Glass/ Plywood Shutter.
Main Platform Over Head Cabinate
* Providing and Fixing of 18mm MR Grade Plywood Finish With 0.8mm White Lam. Inside,
1mm Designer Lam. Outside (1600/ sheet) Glass/ Plywood Shutter.
Contact : 7038957324 Ar.Santosh V Chougule
4. Pune Kolhapur
Kitchen - Tandem + Hettich fittings
Surface finish used
Laminates Finish (Laminate Matt Finish, Laminate gloss Finish), Acrylic
finish, Glass finish, Polyurethane finish, membrane finish and veneer
finish are some of the surface finish options that give a rich feel to your
kitchen. With a wide array of colour options in each, this list gets further
lengthy.
Type of accessories used
There are a plethora of accessories that affect the cost of the Hettich
Modular Kitchen, which includes
o Hinges
o Cabinet hardware like knobs, handles, etc.
o Flap fittings
o Drawer systems
o Drawer runners
o Drawer accessories
o Sliding and folding cabinet door systems
o Tall/pantry units
o Midway series
o Base units
o Overhead units
o Pull out shelves
o Corner solutions
Contact : 7038957324 Ar.Santosh V Chougule
5. Pune Kolhapur
Notes:
1. All the above are smooth Finishes.
2. ISI:303 Grade 16mm MR Ply is considered.
3. ISI:303 Grade 16mm BWR Ply is considered.
4. ISI:710 Grade 16mm BWP Ply is considered.
5. 16mm MDF Board is considered.
6. 16mm HDHMR Board is considered.
7. 18mm Block Board is considered.
8. Ebco/Godrej Zero Crank Soft Close Hinges (except Lofts as Zero Crank Normal Close Hinges), Soft
Close Telescopic Channels,
Handles (upto Rs. 225 MRP) and Other Hardware is considered.
9. Merino/Virgo/Equivalent 1mm external laminates and 0.8mm internal laminates are considered.
a. 1mm Laminates between MRP range 1100 to 1500 are categorised as SF Laminates.
Contact : 7038957324 Ar.Santosh V Chougule