1. Manhattan Air Specialists' Pattented Air Con Duct Cleaning
Manhattan Air Specialists is New York and North Jersey's ecological one-stop solution for cleaning
air con ducts. Their patented rotobrush air duct cleaning has been featured in prominent magazines
and newspapers. They are renowned in the area for prompt, efficient and quality service. Keeping
air ducts and vents clean and free from pollen, mold, mildew, dust mites and animal dander is a
major concern for home and business owners today as indoor air quality can exacerbate allergies.
Manhattan Air Speacilaists uses advanced cleaning methods that remove bacteria, mold and fungi
using vacuums and brushes at the point of contact without using harsh chemicals and sealers
anytime during the cleaning process. The result is clean, fresh air in the home or office.
Problems in the air con ducts arise when a breach in the insulating material or in the ducts
themselves allow unfiltered air to enter or worse if there is a significant build-up of moisture, the
infestation of mold within the circuit. Since most, or all, of the ducts are behind walls, under
floorboards or in the ceiling it won't be readily evident when such a breach occurs. However, the air
quality will deteriorate, evidenced by musty order or sudden increase in allergies within the home.
Technicians start by conducting a thorough inspection of the entire HVAC system including the
filters, the fans, coils and the ducts. Cleaning these and testing the air quality within the system will
determine if there is indeed a problem that needs further attention. If further attention is warranted,
Manhattan Air Speacilaists technicians get behind the walls and under the boards to inspect the
inegrity of the ducts to ascertain if there is a breach that needs to be fixed. Cleaning the ducts
without fixing the underlying cause will only be an absolute waste of time and money.
Air quality is tested for indications that mold colonies are starting to bloomin the duct. Two things
to consider if this test is positive. First, there is an underlying problem that is causing this and it
needs to be addressed. Second, the underlying problem is addressed, the ducts need to be cleaned. If
the ducts are cleaned without the underlying problem rectified, the mold will return.
The use of this patented rotobrush technology is a safe method of cleaning the ducts as it does not
use any abrasive chemicals or sealers within the ducts. Use of sealers and chemicals within the
ducts can be extremely hazardous to the occupants as chemical residue remain after the cleaning
and is mixed with the air flowing through the ducts causing it to be very easily inhaled by the
occupants. Inhaling these abrasive chemicals is toxic and a sever health hazard.