1. 9.45 MEZ-DUCTCAPS
9.17
ASSEMBLING AND FASTENING
9.45.1 MEZ-DUCTCAP
The cover to protect all unfinished ends of rectangular and circular duct
systems from moisture, dirt particles, dust and debris entering the air
handling system! MEZ-DUCTCAP is designed to be installed by stretching
the elastic band over the round branch or any other open end. No tape,
screws or nylon ties are needed to secure the cover to the duct.
- low cost
- light
- takes only seconds to install
- slides right off with no adhesive residue
- reusable
Art.-Nr. Material Spiral duct Extend of duct VPE Weight
mm mm units kg/unit
799/0610 polypropylene NW 150 – 225 400 – 780 25 0,65
799/1014 polypropylene NW 250 – 355 812 – 1195 25 0,80
799/1418 polypropylene NW 355 – 450 1200 – 1500 25 1,30
799/1824 polypropylene NW 450 – 600 1520 – 2000 25 1,55
799/2430 polypropylene NW 600 – 760 2030 – 2500 25 3,20
799/3038 polypropylene NW 760 – 965 2540 – 3020 25 4,20
799/DC070 polypropylene NW 900 – 1400 3000 – 4000 25 4,25
799/DC080 polypropylene NW 1400 – 1600 4000 – 5000 25 4,25
799/DC100 polypropylene NW 1600 – 2400 5000 – 6000 25 4,50
Workmanship + Assembling:
Pick the corresponding ductcap cover for your size pipe, then expand elastic and slide
over pipe. Insulator can slide the ductcap cover off, insulate pipe, and expand the duct-
cap cover over insulated pipe. Slide the ductcap cover off, shake it clean, put in box for
future use and make next or final connection.
All Rights Reserved