Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.
Stokbord cable protection tiles provide a clear visual warning of underground utility services and
protect against possibl...
Upcoming SlideShare
Loading in …5
×

ENA-TS 12-23 Centriforce Stokbord Underground Cable Tiles – Utility Specification

827 views

Published on

ENA-TS 12-23 Centriforce Stokbord Underground Cable Tiles – Utility Specification

Published in: Technology
  • Be the first to comment

  • Be the first to like this

ENA-TS 12-23 Centriforce Stokbord Underground Cable Tiles – Utility Specification

  1. 1. Stokbord cable protection tiles provide a clear visual warning of underground utility services and protect against possible accidental damage. The protection tile is made up of a printed warning tape which is laminated to the surface of the base material. This product is designed to comply with Energy Network Association Technical Specification (ENA-TS) 12-23. Issue 3, 2013 Material The covers are manufactured from reconstituted polyethylene. Only those additives required to facilitate the required finish, strength, durability, colour and opacity are added. Packaging and labelling The protection tiles are stacked face down on a pallet and shrink-wrapped to prevent UV damage to the tile. See Centriforce standard packaging specification for further details. Manufacturer’s notes: This product is used specifically for the protection of underground utility cables. The product should be stored internally or covered and not exposed to direct sunlight. In the event of exposure to UV radiation there is a potential for colour fade which we would expect within a 6 month period in the UK. The information given in this leaflet is true to the best of our knowledge and given in good faith. Users however must establish for themselves that the material is suitable for their specific purpose. No liability will be accepted for any loss or injury resulting from its use. The manufacturer’s policy is one of continuous improvement and development. We reserve the right to change the specification without notice and at any time. Centriforce Products Limited, 14 - 16 Derby Road, Liverpool, L20 8EE Tel: +44 (0) 151 207 8109 Fax: +44 (0) 151 298 1319 E-mail: sales@centriforce.co.uk For more information visit: www.centriforce.com Property Specification Test Method / ComplianceProtection Tile Length 1m (±10mm) Tape Measure Width 300mm (±2mm)* Tape Measure Thickness To Meet the specified acceptance criteria, CLASS 1 or CLASS 2 of ENA-TS 12-23 Issue 3 2013 Impact test (Appendix A) Min.tensile strength 8.4MN/m² BS EN ISO 527: 1996 Impact resistance CLASS 1: 1st strike no penetration and surface indentation <10mm. 2nd strike, < 20mm penetration. No signs of cracking or breaking up. CLASS 2: 1st strike <20mm penetration. 2nd strike, <35mm penetration. No signs of cracking or breaking up. ENA-TS 12-23 Issue 3 2013 Density 910 to 990 kg/m3 BS EN ISO 1183: 2004 Melt flow index 0.3 to 4.0 g / 10 min (2.16 kg) BS EN ISO 1133: 2005 Colours Base material Black/Grey laminated with red/brown film, or Red/Brown. Texttape Yellow, within the range given by BS5252:1976 Group E, Code 10E53 to 10E56 Printed text Black, within the range given by BS5252:1976 Group E Code 10E53. Textlayout Figure 1 (below) or as agreed Stokbord® cable protection tiles Technical Data Sheet Ref:TDS-SCP1 11/13 CAUTION ELECTRIC CAUTION CABLE BELOW LogoLogo M Note: Black lettering (Futura Medium) on yellow background All dimensions in mm. M Logo Manufacturer’s identification Repeat Length 660 240 300 120 12 12 153939152121 150 Figure 1. Typical warning text layout. * Typical. Custom sizes available on request The Red/Brown shall be within the range given by BS5252:1976 Group D, Code 04D43to 06D45

×