1. 4.1 PROTECTIVE GRATING Kit
4.1
AIR INLETS AND OUTLETS
Rational production system for protective
grating with blade-plug in system
4.1.1 MEZ-PROTECTIVE-GRATING
- No spot welding of the blades necessary
- Fin spacing 82 mm
MEZ-CORNER
Art.-Nr. Material A B C D E S VPE Weight
units kg /unit
190 A Galv. steel 100 50 50 50 45,5 1,0 100 0,075
MEZ-FRAME-PROFILES length 5 m
Art.-Nr. Material A B C D E S VPE Weight
m kg /m
191 A Galv. steel 11 15 90 50 - 1,0 100 1,570
MEZ-VALVE-BLADE-PROFILE length 5 m
Art.-Nr. Material A B C D E S VPE Weight
m kg /m
192 Galv. steel 6 15 74 13 7 0,8 100 0,720
MEZ-VALVE-BLADE-CARRIER-SECTION length 5 m
Art.-Nr. Material A B C D E S VPE Weight
m kg /m
193 Galv. steel 82 87 82 - - 1,5 100 0,840
MEZ-SUPPORT PLATE
Art.-Nr. Material A B C D E S VPE Weight
units kg /unit
194 Galv. steel 17 40 82 - - 1,5 100 0,044
Workmanship + Assembling:
- As per the frame profile cut to length the duct cross-section
- Intertwine frame edge and frame profile together - spot weld, rivet or emboss
All Rights Reserved
- Cut to length the valve blade profile and carrier as per clear dimension of the frame
- Fasten the valve blade carrier onto the frame - specify number as per the width of the grill
(Minimum: 2 units)
- Affix support plate onto the frame profile
- Clip on the valve blade profile onto the valve blade carrier