3 conversion
•Download as PPTX, PDF•
0 likes•247 views
1. The document provides conversion formulas between various units of measurement for length, area, volume, time, and temperature in both US customary and metric systems. 2. Key conversions included are that 1 mile equals 5280 feet, 1 acre equals 43560 square feet, 1 liter equals 1000 milliliters, and the formulas to convert between Celsius and Fahrenheit temperatures. 3. The document also gives example conversions applying the formulas, such as 0.25 km equals 250 meters and 3458.08 millimeters equals 3.45808 deciliters.
Report
Share
Report
Share
Recommended
Conversion
This document provides conversions between different metric units of length, area, volume, and liquid volume. It includes conversion tables and example calculations to convert between kilometers to decimeters, square decimeters to hectares, cubic centimeters to cubic millimeters, liters to milliliters, and other conversions between metric units.
Volume
This document discusses volume and capacity. It defines volume as the area of the cross-section multiplied by the height. Capacity refers to the maximum amount a container can hold and is usually measured in mL, L, kL, or ML. Conversions between units of volume and capacity are provided, such as 1L = 1000mL and 1m3 = 1000L. An example calculates the capacity in ML of a storage tank with a given volume of 18200m3.
2015 math 2_nt_converting measurements_e-learning
This document teaches how to convert between measurements of area (cm2 and m2) and volume (cm3 and m3). It provides examples for converting square measurements using the conversion 1 m2 = 10,000 cm2 and cubic measurements using the conversion 1 m3 = 1,000,000 cm3. Learners are guided through examples and practice problems for converting between these common metric units of area and volume.
Circumference and area of circle
This document provides information about parts of circles, rules for calculating circumference and area, and examples of finding circumference, perimeter of semicircles and quarter-circles, and area of full, half, and quarter circles. It defines key circle terms like circumference, diameter, radius, and area. Rules given include formulas for circumference (C = πD and C = 2πr), area (A = πr^2), perimeter of a semicircle (P = C/2 + D) and quarter-circle (P = C/4 + 2r). Worked examples demonstrate applying the rules to calculate values for given circle measurements.
Converting Customary Units
This document provides examples for converting between different units of measurement within the same system. It discusses converting between larger and smaller units by multiplying or dividing. Examples are provided for converting between hours and days, seconds and minutes, inches and feet, and miles and feet. Students are asked to practice making additional conversions between units like gallons, quarts, ounces, pounds, and tons.
L17 the differentials (applications)
Using differentials and local linear approximations, the document provides 4 examples of estimating changes and values:
1) Estimating the change in area of a square if the side increases from 6 to 6.23 cm as approximately 0.8129 cm^2.
2) Estimating the value of 3√55.26 to the nearest thousandth as approximately 2.9830.
3) Estimating the approximate value of y when x=2.01 for the function y=x^3+2x^2-3 as approximately 20.13.
4) Estimating the value of cos 310 as approximately 0.866 using a local linear approximation around 30x.
Computation of Area and volume
Surveying is an important part of Civil engineering. Various part like theodolite, plane table surveying, computation of area and volume are useful for all university examination and other competitive examination
Diseño te
This document summarizes the design of a reinforced concrete beam. Key parameters and calculations are presented, including the material strengths, required reinforcement area, and moment capacities. It is determined that the beam acts as a T-beam with a required area of reinforcing steel of 25.34 cm^2. The calculations verify that the design meets requirements for strength.
Recommended
Conversion
This document provides conversions between different metric units of length, area, volume, and liquid volume. It includes conversion tables and example calculations to convert between kilometers to decimeters, square decimeters to hectares, cubic centimeters to cubic millimeters, liters to milliliters, and other conversions between metric units.
Volume
This document discusses volume and capacity. It defines volume as the area of the cross-section multiplied by the height. Capacity refers to the maximum amount a container can hold and is usually measured in mL, L, kL, or ML. Conversions between units of volume and capacity are provided, such as 1L = 1000mL and 1m3 = 1000L. An example calculates the capacity in ML of a storage tank with a given volume of 18200m3.
2015 math 2_nt_converting measurements_e-learning
This document teaches how to convert between measurements of area (cm2 and m2) and volume (cm3 and m3). It provides examples for converting square measurements using the conversion 1 m2 = 10,000 cm2 and cubic measurements using the conversion 1 m3 = 1,000,000 cm3. Learners are guided through examples and practice problems for converting between these common metric units of area and volume.
Circumference and area of circle
This document provides information about parts of circles, rules for calculating circumference and area, and examples of finding circumference, perimeter of semicircles and quarter-circles, and area of full, half, and quarter circles. It defines key circle terms like circumference, diameter, radius, and area. Rules given include formulas for circumference (C = πD and C = 2πr), area (A = πr^2), perimeter of a semicircle (P = C/2 + D) and quarter-circle (P = C/4 + 2r). Worked examples demonstrate applying the rules to calculate values for given circle measurements.
Converting Customary Units
This document provides examples for converting between different units of measurement within the same system. It discusses converting between larger and smaller units by multiplying or dividing. Examples are provided for converting between hours and days, seconds and minutes, inches and feet, and miles and feet. Students are asked to practice making additional conversions between units like gallons, quarts, ounces, pounds, and tons.
L17 the differentials (applications)
Using differentials and local linear approximations, the document provides 4 examples of estimating changes and values:
1) Estimating the change in area of a square if the side increases from 6 to 6.23 cm as approximately 0.8129 cm^2.
2) Estimating the value of 3√55.26 to the nearest thousandth as approximately 2.9830.
3) Estimating the approximate value of y when x=2.01 for the function y=x^3+2x^2-3 as approximately 20.13.
4) Estimating the value of cos 310 as approximately 0.866 using a local linear approximation around 30x.
Computation of Area and volume
Surveying is an important part of Civil engineering. Various part like theodolite, plane table surveying, computation of area and volume are useful for all university examination and other competitive examination
Diseño te
This document summarizes the design of a reinforced concrete beam. Key parameters and calculations are presented, including the material strengths, required reinforcement area, and moment capacities. It is determined that the beam acts as a T-beam with a required area of reinforcing steel of 25.34 cm^2. The calculations verify that the design meets requirements for strength.
Metric and imperial conversions
This document provides conversion factors between metric and imperial units of length, area, capacity and volume, weight, US measures, and temperature. It lists equivalents for units like centimeters to inches, meters to yards, square centimeters to square inches, liters to gallons, grams to ounces, degrees Celsius to degrees Fahrenheit and vice versa. The goal is to have some useful conversion factors between different measurement systems.
Conversion PPT.pptx
The document discusses units of measurement in the metric system including prefixes, base units for length, mass and capacity. It provides examples of converting between metric units of length, mass, capacity, area, volume and time. Key details include the prefixes used in the metric system (kilo, centi, milli, micro), base units (metre, gram, litre), and formulas for converting between units (multiplying or dividing by powers of ten).
Measurements - English for Civil Engineering
Measurement is essential in civil engineering as it is needed to complete any construction project. The document lists some basic measurement units and conversion factors commonly used in civil engineering, including units for length, time, force, mass, area, liquid volume, and conversions between metric and imperial units. For example, 1 inch is equal to 2.54 centimeters, 1 kilogram is equal to 2.2046 pounds, 1 acre equals 4046.46 square meters.
Converting unit measures
The document discusses various units of measurement in the metric system including units for length (meters, centimeters, millimeters), mass (kilograms, grams), capacity (liters, milliliters), area (square meters, hectares), and volume (cubic meters, liters). It provides examples for converting between metric units using multiplication or division by powers of ten. The document also briefly discusses units of time and provides examples of calculating time to complete multiple tasks.
Factores de conversión
This document provides conversion factors for various units of measurement in the categories of length, area, volume, mass, velocity, density, force, energy, power, and pressure. Some examples of conversions included are:
- 1 kilometer = 1000 meters
- 1 liter = 1000 cubic centimeters
- 1 kilogram = 2.2046 pounds
- 1 joule = 1 newton meter = 0.7376 pound-feet
- 1 watt = 1 joule per second = 0.2389 calories per second
UNITS & CONVERSIONS
This document provides conversion factors and abbreviations for various units of measurement in the metric system including length, area, volume, weight, temperature, time, speed, force, pressure, power, angle, and other physical quantities. Some key conversions include:
- 1 meter = 100 centimeters
- 1 square meter = 10,000 square centimeters
- 1 liter = 1,000 cubic centimeters
- 1 kilogram = 1,000 grams
- 0 degrees Celsius = 32 degrees Fahrenheit
- 1 newton = 100,000 dynes
- 1 bar = 100,000 pascals
Unit Conversion Worksheet
The document is a unit conversion worksheet that provides conversion factors for common units of measurement and asks students to perform unit conversions for various quantities, showing their work and crossing out cancelled units. It includes conversions between seconds and days, pounds and kilograms, inches and miles, and rates such as miles per hour, feet per second, pounds per week, and gallons per month.
Unit Conversion Table.pdf
This document provides a table of standard unit conversion prefixes and multipliers as well as conversion factors between many standard units of measurement for length, volume, temperature, mass, force, energy, power, pressure, and other physical quantities. It lists the standard symbol and definition for each unit and provides the calculation to convert between related units.
Konversi satuan
This document provides conversion factors for various units of length, area, mass, temperature, volume, and time. It lists equivalencies between units like meters and feet, kilometers and miles, grams and pounds, Celsius and Fahrenheit, liters and gallons, and seconds and hours. Over 100 different units are included from various systems around the world.
Conversion scale
This document provides conversion tables for various metric and imperial units of length, area, speed, weight, temperature, and volume. It lists equivalents between units like centimeters and inches for length, square meters and square feet for area, kilometers per hour and miles per hour for speed, grams and ounces for weight, and liters and gallons for volume. The goal is to allow easy conversion between common metric and imperial units used for different measurements.
Formulario
This document provides conversion factors between metric and other measurement systems for various physical quantities including length, mass, force, temperature, energy, power, pressure, velocity, and constants. It lists equivalents for units like meters, grams, newtons, joules, watts, pascals, meters/second, kelvin, pounds, feet, inches, Celsius, Fahrenheit and others between metric, English and other systems. It also provides common physical constants like the universal gas constant, gravitational acceleration, Stefan-Boltzmann constant, Boltzmann constant, speed of light, heat of fusion of water, heat of vaporization of water and more.
surface area & volume
The Sydney Opera House was designed by Danish architect Jørn Utzon between 1955 and 1973. Its distinctive shell design represents a ship under full sail, with each concrete shell being a segment of a sphere with a radius of 75.2 meters. The shells are covered with over 1 million white and cream tiles. The Sydney Opera House sits on 1.3 hectares of land and is 183 meters long and 120 meters wide at its widest point.
Conversion of metric units
The document provides examples for converting between units of measurement including:
1. Kilometers to meters, milligrams to grams, and liters to milliliters.
2. Solutions are shown for converting 6 km to m, 4200 mg to g, and 2.3 L to mL.
3. Additional examples convert 7 km to m, 5500 mg to g, and 5.2 L to mL.
English and Metric System Measurement Conversion (Revise)
English System Unit Conversion
Metric System Unit Conversion
Length Metric and English Conversion
Weight Metric and English Conversion
Volume Metric and Englis Conversion
Temperature Metric and English Conversion
Time Metric and English Conversion
Metric to Metric Equivalents
English to English Equivalents
Metric to English Equivalents
UNIT CONVERSION
This document provides information about metric units of measurement for length, mass, and capacity. It defines common metric units like millimeters, centimeters, meters, kilometers, grams, kilograms, liters, and milliliters. It also includes examples of converting between units, such as centimeters to millimeters or kilograms to grams. Students are asked to complete practice problems converting between different metric units.
Inorg lec 2.pptx
This document provides an overview of topics in inorganic chemistry measurements including:
1) Scientific notation for expressing very large and small numbers
2) Significant figures rules for determining the precision of measurements
3) Conversion of units between different measurement systems like centimeters to kilometers using prefixes
4) Density calculations involving mass, volume, and unit conversions
The document includes examples and practice problems for each topic to illustrate concepts like significant figures, unit conversions using prefixes, and calculating density from mass and volume.
Unit measurement
The document summarizes common units of measurement used in surveying for length, area, volume, weight, angles, temperature, and pressure. It provides conversion factors between British and metric units as well as between different units within each system of measurement. For example, it states that 1 foot is equal to 12 inches in the British system of length measurements and 1 meter is equal to 1000 millimeters in the metric system.
Metric measurement conversion information
This document discusses common units of measurement for length, weight, volume, and area. It provides conversion factors showing how to multiply or divide between units, such as the number of centimeters in a meter or grams in a kilogram. Examples are given demonstrating how to use the conversion factors to change between units of measure.
CONVERSIONSCONSTANTS.pptx
This document contains conversion factors and constants for various units of measurement in areas like angle, area, energy, force, length, pressure, power, velocity, mass, temperature, and prefixes. It provides equivalencies between units like radians and degrees, acres and square meters, BTUs and joules, pounds and newtons, feet and meters, atmospheres and pascals, horsepower and watts, knots and kilometers per hour, grams and atomic mass units, Celsius and Fahrenheit, and prefixes like kilo and milli.
Konversi satuan
This document provides conversion factors between various units of measurement across different categories including acceleration, angle, area, density, electric charge, energy, force, frequency, heat flow rate, length, and others. For each category, equivalencies are given between units like meters and feet, grams and ounces, joules and BTUs, newtons and pounds force, and others. Standard prefixes like milli, centi, and kilo are also explained in terms of their multiplicative factors.
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
More Related Content
Similar to 3 conversion
Metric and imperial conversions
This document provides conversion factors between metric and imperial units of length, area, capacity and volume, weight, US measures, and temperature. It lists equivalents for units like centimeters to inches, meters to yards, square centimeters to square inches, liters to gallons, grams to ounces, degrees Celsius to degrees Fahrenheit and vice versa. The goal is to have some useful conversion factors between different measurement systems.
Conversion PPT.pptx
The document discusses units of measurement in the metric system including prefixes, base units for length, mass and capacity. It provides examples of converting between metric units of length, mass, capacity, area, volume and time. Key details include the prefixes used in the metric system (kilo, centi, milli, micro), base units (metre, gram, litre), and formulas for converting between units (multiplying or dividing by powers of ten).
Measurements - English for Civil Engineering
Measurement is essential in civil engineering as it is needed to complete any construction project. The document lists some basic measurement units and conversion factors commonly used in civil engineering, including units for length, time, force, mass, area, liquid volume, and conversions between metric and imperial units. For example, 1 inch is equal to 2.54 centimeters, 1 kilogram is equal to 2.2046 pounds, 1 acre equals 4046.46 square meters.
Converting unit measures
The document discusses various units of measurement in the metric system including units for length (meters, centimeters, millimeters), mass (kilograms, grams), capacity (liters, milliliters), area (square meters, hectares), and volume (cubic meters, liters). It provides examples for converting between metric units using multiplication or division by powers of ten. The document also briefly discusses units of time and provides examples of calculating time to complete multiple tasks.
Factores de conversión
This document provides conversion factors for various units of measurement in the categories of length, area, volume, mass, velocity, density, force, energy, power, and pressure. Some examples of conversions included are:
- 1 kilometer = 1000 meters
- 1 liter = 1000 cubic centimeters
- 1 kilogram = 2.2046 pounds
- 1 joule = 1 newton meter = 0.7376 pound-feet
- 1 watt = 1 joule per second = 0.2389 calories per second
UNITS & CONVERSIONS
This document provides conversion factors and abbreviations for various units of measurement in the metric system including length, area, volume, weight, temperature, time, speed, force, pressure, power, angle, and other physical quantities. Some key conversions include:
- 1 meter = 100 centimeters
- 1 square meter = 10,000 square centimeters
- 1 liter = 1,000 cubic centimeters
- 1 kilogram = 1,000 grams
- 0 degrees Celsius = 32 degrees Fahrenheit
- 1 newton = 100,000 dynes
- 1 bar = 100,000 pascals
Unit Conversion Worksheet
The document is a unit conversion worksheet that provides conversion factors for common units of measurement and asks students to perform unit conversions for various quantities, showing their work and crossing out cancelled units. It includes conversions between seconds and days, pounds and kilograms, inches and miles, and rates such as miles per hour, feet per second, pounds per week, and gallons per month.
Unit Conversion Table.pdf
This document provides a table of standard unit conversion prefixes and multipliers as well as conversion factors between many standard units of measurement for length, volume, temperature, mass, force, energy, power, pressure, and other physical quantities. It lists the standard symbol and definition for each unit and provides the calculation to convert between related units.
Konversi satuan
This document provides conversion factors for various units of length, area, mass, temperature, volume, and time. It lists equivalencies between units like meters and feet, kilometers and miles, grams and pounds, Celsius and Fahrenheit, liters and gallons, and seconds and hours. Over 100 different units are included from various systems around the world.
Conversion scale
This document provides conversion tables for various metric and imperial units of length, area, speed, weight, temperature, and volume. It lists equivalents between units like centimeters and inches for length, square meters and square feet for area, kilometers per hour and miles per hour for speed, grams and ounces for weight, and liters and gallons for volume. The goal is to allow easy conversion between common metric and imperial units used for different measurements.
Formulario
This document provides conversion factors between metric and other measurement systems for various physical quantities including length, mass, force, temperature, energy, power, pressure, velocity, and constants. It lists equivalents for units like meters, grams, newtons, joules, watts, pascals, meters/second, kelvin, pounds, feet, inches, Celsius, Fahrenheit and others between metric, English and other systems. It also provides common physical constants like the universal gas constant, gravitational acceleration, Stefan-Boltzmann constant, Boltzmann constant, speed of light, heat of fusion of water, heat of vaporization of water and more.
surface area & volume
The Sydney Opera House was designed by Danish architect Jørn Utzon between 1955 and 1973. Its distinctive shell design represents a ship under full sail, with each concrete shell being a segment of a sphere with a radius of 75.2 meters. The shells are covered with over 1 million white and cream tiles. The Sydney Opera House sits on 1.3 hectares of land and is 183 meters long and 120 meters wide at its widest point.
Conversion of metric units
The document provides examples for converting between units of measurement including:
1. Kilometers to meters, milligrams to grams, and liters to milliliters.
2. Solutions are shown for converting 6 km to m, 4200 mg to g, and 2.3 L to mL.
3. Additional examples convert 7 km to m, 5500 mg to g, and 5.2 L to mL.
English and Metric System Measurement Conversion (Revise)
English System Unit Conversion
Metric System Unit Conversion
Length Metric and English Conversion
Weight Metric and English Conversion
Volume Metric and Englis Conversion
Temperature Metric and English Conversion
Time Metric and English Conversion
Metric to Metric Equivalents
English to English Equivalents
Metric to English Equivalents
UNIT CONVERSION
This document provides information about metric units of measurement for length, mass, and capacity. It defines common metric units like millimeters, centimeters, meters, kilometers, grams, kilograms, liters, and milliliters. It also includes examples of converting between units, such as centimeters to millimeters or kilograms to grams. Students are asked to complete practice problems converting between different metric units.
Inorg lec 2.pptx
This document provides an overview of topics in inorganic chemistry measurements including:
1) Scientific notation for expressing very large and small numbers
2) Significant figures rules for determining the precision of measurements
3) Conversion of units between different measurement systems like centimeters to kilometers using prefixes
4) Density calculations involving mass, volume, and unit conversions
The document includes examples and practice problems for each topic to illustrate concepts like significant figures, unit conversions using prefixes, and calculating density from mass and volume.
Unit measurement
The document summarizes common units of measurement used in surveying for length, area, volume, weight, angles, temperature, and pressure. It provides conversion factors between British and metric units as well as between different units within each system of measurement. For example, it states that 1 foot is equal to 12 inches in the British system of length measurements and 1 meter is equal to 1000 millimeters in the metric system.
Metric measurement conversion information
This document discusses common units of measurement for length, weight, volume, and area. It provides conversion factors showing how to multiply or divide between units, such as the number of centimeters in a meter or grams in a kilogram. Examples are given demonstrating how to use the conversion factors to change between units of measure.
CONVERSIONSCONSTANTS.pptx
This document contains conversion factors and constants for various units of measurement in areas like angle, area, energy, force, length, pressure, power, velocity, mass, temperature, and prefixes. It provides equivalencies between units like radians and degrees, acres and square meters, BTUs and joules, pounds and newtons, feet and meters, atmospheres and pascals, horsepower and watts, knots and kilometers per hour, grams and atomic mass units, Celsius and Fahrenheit, and prefixes like kilo and milli.
Konversi satuan
This document provides conversion factors between various units of measurement across different categories including acceleration, angle, area, density, electric charge, energy, force, frequency, heat flow rate, length, and others. For each category, equivalencies are given between units like meters and feet, grams and ounces, joules and BTUs, newtons and pounds force, and others. Standard prefixes like milli, centi, and kilo are also explained in terms of their multiplicative factors.
Similar to 3 conversion (20)
English and Metric System Measurement Conversion (Revise)
English and Metric System Measurement Conversion (Revise)
Recently uploaded
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-mule-event-processing-models/
Agenda
● What is event processing in MuleSoft?
● Types of event processing models in Mule 4
● Distinction between the reactive, parallel, blocking & non-blocking processing
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shivani Yasaswi - https://www.linkedin.com/in/shivaniyasaswi/
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Constructing Your Course Container for Effective Communication
Communicating effectively and consistently with students can help them feel at ease during their learning experience and provide the instructor with a communication trail to track the course's progress. This workshop will take you through constructing an engaging course container to facilitate effective communication.
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15Recently uploaded (20)
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
Constructing Your Course Container for Effective Communication
Constructing Your Course Container for Effective Communication
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
3 conversion
- 1. Conversion US Customary Measures of Length
- 2. 12 inches (in) = 1 foot (ft) 3 ft = 1 yard (yd) 1 mile (mi) = 5280 ft = 1760 yd 1 acre = 4840 sq. yd. = 43560 sq.ft. = 0.04686 ha = 4046.86 sq.m.
- 3. Unit Measure of Length Metric Converter km hm dkm m dm cm mm 0.25 km = _____ dm 25.8 cm = ________m2500 0.25 8 1 1 2 3 4 2
- 4. Unit Measure of Area km2 hm2 dkm2 m2 dm2 cm2 mm2 36.8m2 = ________ cm2 1200dm2 = _________hectares 368 000 hectare 12000.00
- 5. Volume in terms of cubic units m3 dm3 cm3 mm3 0.038 m3 = __________cm3 25000mm3 = ______________m3 38000 250000.0000
- 6. Volume in terms of Liters L dl cl ml 0.138 L = ______ mL 3807 cL = _______dL 138 380.7
- 7. m3 dm3 cm3 mm3 L dL cL mL 1. 3m3 = _______ L = _________dm3 = _______L 2. 7500 cL = ________mm3 = _______mL = ______cm3 = mm3 1dm3 = 1L 3000 3000 75000 75000 75000 000
- 8. m3 dm3 cm3 mm3 1cm3 = 1mL L dL cL mL 3458.08mm3 = ________ dL = = = 3.45808 cm3 3.45808 mL 345808 dL0.0
- 10. 1 minute = 60 seconds 1 hour = 60 minutes 1 day = 24 hours 1 week = 7 days 1 year = 12 months 1 decade = 10 years 1 century = 100 years 1 millennium = 1000 years
- 12. C = 5/9 (F – 32) F = 9/5C + 32