Buy the Ditek MB10 at JMAC Supply. https://www.jmac.com/Ditek_DTK_MB10_p/ditek-dtk-mb10.htm?=slideshare

1. DTK-MB Series with Snap Track Channel
Quick-Install Mounting System for DTK-2MHLP and DTK-2MHTP
One DITEK Center
1720 Starkey Road
Largo, FL 33771
1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
Doc. Number: SPS-100041-001 Rev 3 01/12
©2011 DITEK Corp.
Specification Subject to Change
The DTK-MB Series, with Snap-Track, is the mounting
base system for DTK-2MHLP surge modules. This
mounting system allows the installer to protect multiple
circuits terminating at the same point . Perfect for alarm
panels, fire control systems, or other low voltage
communications circuits. The DTK-MB makes for a
quick and easy wire management solution.
Features
Available in arrays of 1, 2, 3, 4 or 5
Straight-in/straight-out terminal connections
Single point ground for ease of installation
Fast installation saves time
Benefits
Scalable up to 10 pairs of protection
Protect multiple line voltages in one cabinet
Up to 10 data, telco or other communication pairs
protected with only one ground connection and only
one backplane mount, simplifying installation.
Ordering Guide
Single unit: DTK-MB10
With surge module:
DTK-2MHLPxxBWB (WB = With Base = DTK-MB10)
Horizontal wiring across base: DTK-MBV
Multiple bases: DTK-#MB - # indicates the array number of
modular bases desired (2-5)
Dimensions
DTK- MBV (2 pairs): 3.25”H x 1.50”W (82.5mm x 38.1mm)
DTK- MB10 (2 pairs): 3.25”H x 1.50”W (82.5mm x 38.1mm)
DTK- 2MB (4 pairs): 3.25”H x 3.00”W (82.5mm x 76.2mm)
DTK- 3MB (6 pairs): 3.25”H x 4.50”W (82.5mm x 114.3mm)
DTK- 4MB (8 pairs): 3.25”H x 6.00”W (82.5mm x 152.4mm)
DTK- 5MB (10 pairs): 3.25”H x 7.50”W (82.5mm x 190.5mm)
DTK-5MB
DTK-4MB
DTK-3MB
DTK-2MB
DTK-MB10
DTK-MBV