The DTK-FPK4 is a fire alarm control panel surge protection kit that contains: - A DTK-120SRD surge protector that provides AC power protection for alarm panels with 54,000 amp surge capacity and EMI/RFI filtering. - A DTK-MRJ45C5E protector with RJ45 connections that protects the four pairs of an IP dialer circuit. - The kit is designed to provide both AC power and IP communication circuit protection for fire alarm systems in a single convenient package.

1. DTK-FPK4
IP Dialer Fire Alarm Control Panel Surge Protection
General Product Specifications
Product Description
DTK-FPK4
- 120SRD Series Installation AC Surge Protector
- Multi-stage protection, in series with the electrical supply for maximum protection
- 54,000 A peak surge current capacity, 20A max operating current
- Provides AC power protection for alarm power supply at alarm panel
- Suitable for use on circuit breakers rated at 10kA AIC
- MRJ45C5E
- Four-Pair IP Dialer protection
- RJ45 In/Out connection
- CAT5e data rate
Warranty (All Products): 10 Year Limited Warranty
One DITEK Center
1720 Starkey Road
Largo, FL 33771
1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
Doc. Number: SPS-100052-001 Rev 3 10/13
©2013 DITEK Corp.
Specification Subject to Change
Fire Protection Kits from DITEK are designed for commercial alarm professionals
specializing in fire detection systems. The FPK4 provides premium AC power and IP Dialer
protection in a convenient kit.
The DTK-120SRD provides maximum critical load protection, with EMI/RFI filtering and
Dry Contacts for remote notification of surge protection status.
The DTK-MRJ45C5E features RJ45 In/Out connection for IP-enabled alarm dialers, with
protection for four pairs.
DTK-FPK4
Note: See DTK-120SRD and DTK-MRJ45C5E datasheets for individual
product specifications.