Buy the Ditek RM16NM at JMAC Supply. https://www.jmac.com/Ditek_DTK_RM16NM_p/ditek-dtk-rm16nm.htm?=slideshare

1. DITEK’s RM16NM rack mount surge protectors for CCTV video feeds are used by top security
professionals. They are effective at preventing damage to DVRs and head-end equipment
caused by voltage surges from pole-mounted or external cameras’ video feeds. Tight clamping
voltage ensures top protection, enabling continuous operation of critical CCTV equipment.
Rack Mount CCTV Video Surge Protector
General Product Specifications
DTK-RM16NM
DTK-RM16NM
Product Features
• Reduces DVR downtime and failure from voltage
surges through external camera feeds
• Protects 16 camera feeds in a 1U height rack
mount package
• SAD technology provides optimal circuit protection
• Field replaceable surge protection modules
• Ultra-low 2.8V clamping provides protection below
DVR damage threshold
• Single point ground improves protection and
speeds installation
• Ten Year Limited Warranty
One DITEK Center
1720 Starkey Road
Largo, FL 33771
Document: SPS-100027-001 Rev 7 2/12
©2011 DITEK Corp.
Specification Subject to Change
1-800-753-2345 Direct: 1-727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
Specifications
• Connection Method: BNC Female 16 In/ 16 Out
• Protection Type: Analog Video
• Service Voltage: -1V – 1V
• Voltage Clamping: 2.8VDC
• Peak Surge Current: 291 Amps/Channel
(10/1000 µsec impulse)
• Coaxial Band Pass Range: 0Hz – 10MHz,
• Return Loss: 24dB RL @ 10MHz
• Insertion Loss: <0.3dB/Channel
• Impedance: 75 Ohms
• Protection Modes: Center Pin – Shield,
Shield–Gnd., Center Pin-Gnd.
• Dimensions: 1.65” H x 19” W x 2.15” D
(41mm x 483mm x 55mm)
• Weight: 2.6lbs. (1.18kg)
• Housing: Galvanneal Sheet Metal