How to seal a cedar play set

1. Infinity Wood Sealers
WoodSealers.com

2. In order to maintain the look of Cedar, a Cedar
playset should be sealed within the first 30-60
days of setting it up. If they aren't sealed, they
start to lose their Cedar color and develop
faded areas.

3. If the Cedar is new or well maintained, little
cleaning or preparation will be required. Using
a low pressure washer, clean off any dirt of
lose material from the playset.
If the Cedar is old or weathered, you will have
to sand down any rough areas, remove mold
and mildew using the Infinity Wood Cleaner,
and consider applying the Infinity Wood
Brightener to open up the pores and prepare
the Cedar for proper sealer penetration.

4. Once the Cedar playset has been cleaned and properly
prepared, you can seal the playset using the Infinity Wood
Sealer.
Color Option: The Infinity Wood Sealer will dry clear. If you
choose to add an Infinity Wood Tint, the tint can be added to
the sealer prior to application. Suggested mix ratio is 1
container of Infinity Wood Tint to 1 Gallon of Infinity Wood
Sealer. Mix thoroughly until the tint is completely blended
into the sealer. Adding tint will provide the wood with an
increased UV protection of 75 SPF.
Application: Using a low pressure sprayer, brush or roller,
liberally apply the Infinity Penetrating Wood Sealer until the
wood can no longer accept any additional liquid.

5. To order, visit WoodSealers.com or call us at
1(800) 269-1421.