Some cells in your body frequently divide, while others in your body.pdf

•

0 likes•2 views

Some cells in your body frequently divide, while others in your body rarely, if ever, divide. a. Think of a type of cell that would frequently divide b. Think of a type of cell that would rarely, if ever, divide c. How would these two cells differ in their interphase? Solution A. all the cells of the body (except some cells) divide continuously such as epidermal cells, outer layer all the main organs like stomach, intestines, liver. B. Some cells the neuronal cells rarely divide. They are as such as they present during childhood. C. interphase is a phase during cell cycle where cells prepare itself for cell division. In normal dividing cells, it is divided into three phase G1, S and G2 phase. Whereas the cell which rarely divides cells enter into Go phase in which cells doesnot have to bother for cell division.

Education

Similar to Some cells in your body frequently divide, while others in your body.pdf

BU4.3 Cell Cycle Regulation & Cancer

NeQuelle DeFord

Unit 7 mitosis powerpoint (revised2013)

mpiskel

Cell cycle

AmitaRanjan2

Cell division-mitosis-meiosis

Mitosis

Mitosis meosis

CELL DIVISION.pptx

Cell cycle and division

Rohit Mondal

Cell differentiation notes

Personal

Cell division-mitosis-meiosis-1225581257073362-9

University Of Johannesburg

542.ppt

HumaTahreem2

BIO420 Chapter 01

BealCollegeOnline

Cell Division Mitosis and Meiosis

Catherine Patterson

Cell division-mitosis-meiosis-1225581257073362-9[1]

Feriha Ercan

cell differentation.pptx

ShwetaSingh575782

CELL DIFFRENTIATION.pptx

sabantekin2

Stem cells

DocIbrahimAbdelmonaem

Diferenciacion celular

Juan Carlos Munévar

Healing

Jomin George

Mitosis powerpoint

farrellw

Similar to Some cells in your body frequently divide, while others in your body.pdf (20)

BU4.3 Cell Cycle Regulation & Cancer

Unit 7 mitosis powerpoint (revised2013)

Cell cycle

Cell division-mitosis-meiosis

Mitosis

Mitosis meosis

CELL DIVISION.pptx

Cell cycle and division

Cell differentiation notes

Cell division-mitosis-meiosis-1225581257073362-9

542.ppt

BIO420 Chapter 01

Cell Division Mitosis and Meiosis

Cell division-mitosis-meiosis-1225581257073362-9[1]

cell differentation.pptx

CELL DIFFRENTIATION.pptx

Stem cells

Diferenciacion celular

Healing

Mitosis powerpoint

More from info309708

Pluto has been hard to measure from Earth because of its atmosphere. .pdf

info309708

Loops and Arrays Objectives: Arrays are a series of elements consisting of the same type (For ex: all integers), in a contiguous chunk of memory. The elements can be individually referenced by indexing the array. You must specify the type of data stored in an array, and each element in any array must be of the same type. An array has a static size -- they cannot grow any larger than the size you tell it to be when you create it. To access the value at that index of the array: for (int i = 0; i < 10; i++){ cout<< intArray[i]<< endl; } To access the memory address of the array element: for (int i = 0; i < 10; i++){ cout << intArray + i << endl; } Creating an Array and Initializing When you declare an array, you will get an uninitialized section of memory. If you want to create an array of numbers, you would do: int intNumbers [10]; double dblNumbers[10]; Then, putting element in the array can be set up by using the index of the array element you want to change: intNumbers[0] = 3; intNumbers[1] = 5; intNumbers[2] = 6; intNumbers[3] = 8; 1. Write a program that uses a for loop. 2. Declare and initialize and array. 3. Practice the array operations print and modify. When you create an array, you do so to capture a group of items that all need to be treated separately, but also need to grouped together for some purpose. For example, when you think about a song, each note in the song is a separate sound, but they all need to be included together in a certain order to make up the song. To initialize the array: int intNum [5] = {16, 3, 20, 4, 21}; (Hint: notice the syntax difference initializing this array versus the one above) Retrieving/Adding/Changing elements To access or retrieve individual elements in an array, the syntax is square brackets and the element index (starting from 0): intNumbers[0]; will be the first item in the intNumbers array. intNumbers[1]; will be the second item in the intNumbers array. Below is an example of a basic 2D array. It shows how we access certain elements shown in the arrayName[row][column] format. This will be helpful for a future assignment. We can change the values in the array using the index of the individual items, such as Example 1: int intNumbers[2]; intNumbers[0] = 5; intNumbers[1] = 7; intNumbers[1] = intNumbers[1] * 2 cout << intNumbers[1] << endl; Example 2: //this will print the value 14 intNumber[1] = 10; Example 3: for (int i = 0; i < 10; i++){ intArray[i] = i; cout << intArray[i] << endl; //this will update the value to 10 at that index //will set what the values are in that position //will print out the value of i at each index } TO DO: Create an array in your main function 1) Create an array of 20 doubles, using a variable name of your choosing. Assign values to your array using a for loop: for (int i = 0; i < 20; i++) myDoubles[i] = i; where myDoubles is the name of the variable created. 2) Print out the values in another for loop using: cout << “Stuff to print” << endl; 3) Now, using your array an.

Loops and ArraysObjectivesArrays are a series of elements consi.pdf

info309708

Modern Database Management 11th Edition by Jeffrey A. Hoffer Use the UNION statement to provide a combined listing of care center names and their locations as well as laboratories and their location. The list should be sorted by location, in ascending order. (You should use aliases to rename the fields in this query.) Please provide results! Solution The UNION operator is used to combine the result-set of two or more SELECT statements.The UNION operator selects only distinct values by default. To allow duplicate values, use the ALL keyword with UNION. Syntax: SELECT column_name(s) FROM table1 UNION ALL SELECT column_name(s) FROM table2; Now Let us consider that there are two tables namely care_center_t and laboratory_t where the care_center_t contains rows like care_center name ,location1 and the laboratory_t consists of rows such as laboratories and Locations2. SELECT operator is used in selecting of particular rows from the table. So, now we select rows namely care_center_name and location1 from care_center_t table and Loboratories and location2 from laboratory_t table. The Database Query for the above problem is SELECT care_center_name as name,location1 as location from care_center_t UNION all Select laboratory as name ,location2 as location from laboratory_t.

Modern Database Management 11th Edition by Jeffrey A. HofferUse th.pdf

info309708

Let f X Y be a function.True or FalseA sufficient condition for f .pdf

info309708

It\'s your third week on the job at Panache Inc. Last week, you made sure all investment transactions for trading, available-for-sale, held-to-maturity, and equity securities were properly recorded. You are reviewing the financial statement reporting for the securities and have found a newspaper clipping dated December 31 that indicates the price of the stock of Omni company had dropped the day before because of the company\'s severe financial difficulties. While the company is not expected to fail, the article states the earnings of the company have permanently declined due to changes in the new-homes market. You do a quick check of the stock price on that day and find that the stock closed at $8 per share. Panache owns 10,000 shares of Omni\'s stock as an available-for-sale security. The original cost of the stock was $20 per share, and the fair value at the last reporting date (September 30, 2016) was $15 per share. You have just begun to write a memo to the president of the company, Mr. Cartwright, about this investment when he stops by your office and says, \"I have a question for you.\" He says, \"As you know, we use a special metal called tellurium in our cars. It takes 10 pounds for each car we build. I had a feeling last summer that tellurium prices were going to go up in October, so Mr. Brown told me he could lock the prices in by using a dirigible. Did he do that?\" \"It was probably a derivative, Mr. Cartwright,\" you reply. \"Let me look through the files and see what I can find, and I\'ll get back to you. I\'ll include my findings in the memo I\'m writing to you about another investment.\" You locate a file labeled tellurium futures, and inside you find several documents. The first one is a handwritten note dated August 31, 2015, that says: Agreed to tellurium futures contract expiring December 31, 2015; agreement gives Panache the right to purchase 2,000 pounds of tellurium at a price of $500 per pound. Signed, C. Brown 8/31/2015. The second paper is a schedule showing prices of tellurium: Date Price 8/31/2015 $500 9/30/2015 $530 10/31/2015 $550 The third document is an invoice for the purchase of 2,000 pounds of tellurium on October 31 at $550 per pound. There is a note on the invoice in Ms. Brown\'s handwriting that says: Settled futures contract today. C. Brown 10/31/2015. You know that tellurium purchased in October would have been used to produce the 200 cars made in November. The cars produced in November were sold in December for $15,000 each. The total cost to produce the cars was $12,000 each. You are required to: Prepare all journal entries that should have been recorded related to the futures contract, including any entries needed for the September 30, 2016, financial statements; the purchase of the tellurium; and the sale of the cars in December. Create the journal entries in an Excel spreadsheet. Write a 2-page memo to Mr. Cartwright that includes: A discussion of the investment in Omni company stock and the requir.

Its your third week on the job at Panache Inc. Last week, you made.pdf

info309708

In JAVA Write a program that uses a two-dimensional array to sto.pdf

info309708

How do CCMI model help with the improvements and comparison of the process life cycle? Solution CCMI: Capability improvement model integration which is a method of improvement model which includes the top perfomances advanced in improvement of software,acquired from industry .CMMI isolates the top perfomance knowledge to discrete levels ,and every level advances to elevated level.each and every level inscribe growth and nurture of the life cycle. CMMI is uniquely applied to software evolution organisations and focus on uniterrupted improvement..

How do CCMI model help with the improvements and comparison of the p.pdf

info309708

How would you implement a node classs and an edge class to create a undirected and a directed graph using c++ Please provide a default constructor, copy constructor, accessing functions , and destructor for each of the classes to print out a graph ( node, edge , directed ,undirected ) V={1,3,3,4,5,6} E={(1,2),(1,4),(2,3),(2,4),(2,5),(3,4),(5,3),(6,3),(6,5)} How would you implement a node classs and an edge class to create a undirected and a directed graph using c++ Please provide a default constructor, copy constructor, accessing functions , and destructor for each of the classes to print out a graph ( node, edge , directed ,undirected ) V={1,3,3,4,5,6} E={(1,2),(1,4),(2,3),(2,4),(2,5),(3,4),(5,3),(6,3),(6,5)} Please provide a default constructor, copy constructor, accessing functions , and destructor for each of the classes to print out a graph ( node, edge , directed ,undirected ) V={1,3,3,4,5,6} E={(1,2),(1,4),(2,3),(2,4),(2,5),(3,4),(5,3),(6,3),(6,5)} Solution #include #include #include #include #include using namespace std; class Graph; class Edge; class Vertex; class Edge { int weight; Vertex * vertex1; Vertex * vertex2; public: int getWeight() const {return weight;} Vertex* getV1() const {return vertex1;} Vertex* getV2() const {return vertex2;} void setWeight(int w){weight=w;} void setV1(Vertex * v){vertex1=v;} void setV2(Vertex * v){vertex2=v;} Edge(int w, Vertex* v1, Vertex* v2){weight=w;vertex1=v1;vertex2=v2;} }; class Vertex { string label; vector edgesLeavingMe; bool visited; public: string getLabel() const {return label;} vector getEdges()const{return edgesLeavingMe;} Edge * getEdgeTo(string d){ for (vector::iterator it = edgesLeavingMe.begin(); it != edgesLeavingMe.end(); ++it){ if ((*it)->getV2()->getLabel()==d){ return (*it); } } return 0; } void setVisited(bool v){visited=v;} bool getVisited() {return visited;} void addEdge(Edge * e){edgesLeavingMe.push_back(e);} void removeEdge(Edge * e){edgesLeavingMe.erase(remove(edgesLeavingMe.begin(),edgesLeavingMe.end(),e),edgesLea vingMe.end());} void removeEdgeTo(string l){ Edge * e = getEdgeTo(l); removeEdge(e); } Vertex(string l){label=l; visited=false;} }; class Graph { vector edges; map vertices; public: Vertex * addVertex(string label){ Vertex * v = new Vertex(label); vertices[label]=v; return v; } Edge * addEdge(int w, string from, string to); void removeEdge(string from, string to); Vertex * getVertexWithlabel(string l); void removeVertex(string l); }; class UnDirectedGraph { vector edges; map vertices; public: Vertex * addVertex(string label){ Vertex * v = new Vertex(label); vertices[label]=v; return v; } map getVertices(){return vertices;} vector getEdges(){return edges;} Edge * addEdge(int w, string from, string to){ if (vertices.find(from) != vertices.end() && vertices.find(to) != vertices.end()){ Vertex * vfrom = vertices.find(from)->second; Vertex * vto = vertices.find(to)->second; Edge * e = new Edge(w,vfrom,vto); (*vfrom).addEdge(e); (*vto).addEdge(e); edges.push_back(e.

How would you implement a node classs and an edge class to create .pdf

info309708

How do you evaluate your own global mind set levels? Solution ANSWER: A global mindset is refers to a special trait of global leadership which is associated with manager-employee relationship, trust, and organizational commitment. There are prime three features of global mindset namely- intellectual capital, psychological capital and social capital. While evaluating my own global mind set levels I have to consider all these features. Intellectual capital is my ability to understand and process new information, which are helpful to learn about people of different cultures and know how to respond. Psychological capital, is evaluating my openness, cognitive flexibility and willingness to work with other cultures. Social capital is the relationships network that I have with their colleagues from different cultures, and can help me to act in a trustworthy manner and build relationship with others from different cultures. The development of a global mindset that sub-includes cultural intelligence and global business orientation will help me to think globally and swiftly act to maintain the competitiveness in multicultural organizations and international markets. Keeping all these above points, I can properly designed questionnaire survey can be of useful in global mindset evaluation for me as well as others. My global mindset affects the cognitive capabilities and the decision-making patterns, thus exerting significant influence on the strategic capabilities of firms as well as my personal life..

How do you evaluate your own global mind set levelsSolutionAN.pdf

info309708

Here are two datasets: Dataset A: 64 65 66 68 70 71 72 Dataset B: 64 65 66 68 70 71 720 For dataset A, the mean and median are 68. Looking at dataset B, notice that all of the observations except the last one are close together. Which measure will be affected by this last observation in dataset B? Mean or Median Solution Data set B: Mean will be affected since we have outlier(720) in the data hence we know that outlers are very much affected by mean . But no affect on the Median.

Here are two datasetsDataset A 64 65 66 68 70 71 72Dataset B .pdf

info309708

Getting Started Create a class called Lab8. Use the same setup for setting up your class and main method as you did for the previous assignments. Be sure to name your file Lab8.java. Additionally, make another file called Arrays.java. This file will be an object, so simply start it off by declaring an Arrays class. You can copy the following skeleton and fill in the appropriate code below each of the comments: public class Arrays { / Instance Variables // Constructors // findMin 1 // findMax // calcSum // calcAverage // toString } Task Overview Your task for this lab is to create a class called Arrays with some array processing methods. This class will maintain an array and the number of elements present in it. Additionally, methods will be available to display the current min and max elements along with the average of all of them. Finally, a toString() method will be available to cleanly display all the array elements. Finally, you will write a simple driver class to test out the above Arrays class. Part 1: Instance Variables for Arrays The first thing to do for the Arrays class is to set up its instance variables. Declare the following (private) instance variables: • An int array called array ? this will be the array we will be writing methods for. • An int called count - this represents the number of valid elements in the array. Part 2: Constructors for Arrays The Arrays class will have two constructors. The first constructor takes the maximum size of the array as input as a parameter and initializes the array instance variable appropriately. It also sets count to size. Finally, it will initialize all of the array elements to some values between 0 and 10, inclusive. To create this constructor, follow these steps: • Import java.util.Random to make use of the random number generator. • Create a constructor with the following header: public Arrays(int size) • Initialize your array variable and set its size to size (see the chart on page 252 for reference on initializing arrays). Be very careful that you are setting the value of your array instance variable, as opposed to creating a new variable called array. • Set the value of the count variable to size because we will be populating the entire array. • Copy the following code to the constructor in order to generate random values between 0 and 10, inclusive: Random rand = new Random(); for (int i = 0; i < count; i++) { array[i] = (rand.nextInt(10)); } Next, create another constructor with the following header: public Arrays(int[] arr). This constructor will initialize the class by using the passed arr argument in order to fill its instance variables. The following things need to be done inside of this constructor: • Set the array variable equal to arr. • Set the count variable equal to the length of the array. Part 3: Displaying the Output findMin() The first method of this class will search the array for the minimum element. Copy the following code for the findMin method. Note how the count i.

Getting StartedCreate a class called Lab8. Use the same setup for .pdf

info309708

For this homework, you will develop a class called VendingMachine th.pdf

info309708

Discuss what is SSH and the advantages and disadvantages of using it on your Linux distribution. Also discuss how to control ssh access and how you configure this service. Solution SSH is also known as Secure Socket Shell. It is a network protocol that provides administrators with a secure way to access a remote computer. For advantages of it, SSH is widely used by network administrators for managing systems and applications remotely. It allows them to log in to another computer over a network, execute commands and move files from one computer to another. The biggest disadvantage would be people logging in as the computer\'s administrator over SSH and this can be done by brute force for the password. To limit ssh access to a linux machine based on originating IP address, edit /etc/hosts.allow:.

Discuss what is SSH and the advantages and disadvantages of using it.pdf

info309708

Describe the differences between the three major physical connection mediums: twisted-pair cable, coaxial cable, and fiber-optic cable. Solution Below is the Difference Between Fiber Optic Cable, Twisted Pair and coaxial Cable : Twisted Pair Cables Twisted pair cable consists of a pair of insulated wires twisted together, which is adapted in the field of telecommunication for a long time. With the cable twisting together, it helps to reduce noise from outside sources and crosstalk on multi-pair cables. Twisted pair cable works well on transferring balanced differential signals, the merits of which are extremely valuable in wide bandwidth and high fidelity system. Basically, twisted pair cable can be divided into two types: unshielded twisted-pair (UTP) and shielded twisted-pair (STP). The former serves as the most commonly used one with merely two insulated wires twisted together. Any data communication cables and normal telephone cables belong to this category. However, shielded twisted pair distinguishes itself from UTP in that it consists of a foil jacket which helps to prevent crosstalk and noise from outside source. It is typically used to eliminate inductive and capacitive coupling, so it can be applied between equipment, racks and buildings. With the advancement of technology, the twisted pair cables are now being phased out by more technically developed and reliable media. Coaxial Cables Coaxial cable acts as a high-frequency transmission cable which contains a single solid-copper core. A coaxial cable has over 80 times the transmission capability of the twisted-pair. It is commonly used to deliver television signals and to connect computers in a network as well, so people may get more familiar with this kind of cable. Coaxial cable has always been the mainstay of high speed communication and has also been applied to network with 10 gigabit links data centers, because it is proved to be cost efficient for short links within 10 m and for residential network. Besides, it features anti-jamming capability, stable transmission of data and money saving. Coaxial cable is widely employed in feedlines connecting radio transmitters and receivers, computer network connection, digital audio and television signals distribution. Moreover, coaxial cable can effectively protect signals from being interfered by external electromagnetic influence. Fiber Optic Cables Computing and data communications are fast-moving technologies. There comes a new generation of transmission media—fiber optic cable. It refers to the complete assembly of fibers, which contain one or more optical fibers that are used to transmit data. Each of the optical fiber elements is individually coated by plastic layers and contained in a protective tube. Fiber optic cable transmits data as pulses of light go through tiny tubes of glass, the transmission capacity of which is 26,000 times higher than that of twisted-pair cable. When comparing with coaxial cables, fiber optic cables ar.

Describe the differences between the three major physical connection .pdf

info309708

Create a student record management system using linked list and queue using Java language and database to save files and GUI Java swing to create background and also use HTML. With the following properties A . register students(assume each students has ID, first name ,last name and middle name) B.register students with courses(course no ,course title crh) C.able to maintain grade on which course they are registered d.searches students by ID displays if found E.searches by course name F. sorts student name in alphabetical order G.displays the details of all students H.Deletes a student by id I.Deletes a course by courseNo J. Handles errors in informative ways . Solution public class StudentRegistration extends JFrame implements ActionListener{ JLabel idLabel, fnameLabel, midnameLabel, lastnameLabel, courseLabel; JTextField idField, fnameField, midnameField, lastnameField, courseField; JButton registerButton; JPanel panel; List list = new ArrayList(); StudentRegistration() { setSize(800, 400); setLayout(null); idLabel = new JLabel(\"ID\"); fnameLabel = new JLabel(\"First Name\"); midnameLabel = new JLabel(\"Mid Name\"); lastnameLabel = new JLabel(\"Last Name\"); courseLabel = new JLabel(\"Course\"); // Defining ID field idField = new JTextField(); idField.addKeyListener(new KeyAdapter() { public void keyTyped(KeyEvent e) { char c = e.getKeyChar(); } }); // Defining Name field fnameField = new JTextField(); fnameField.addKeyListener(new KeyAdapter() { public void keyTyped(KeyEvent e) { char c = e.getKeyChar(); } }); registerButton = new JButton(\"Register\"); registerButton.addActionListener(this); add(idLabel); add(fnameLabel); add(midnameLabel); add(lastnameLabel); add(courseLabel); add(idField); add(fnameField); add(midnameField); add(lastnameField); add(courseField); add(registerButton); list.add(new User(idField.getText(), fnameField.getText(),midnameField.getText(), lastnameField.getText(),courseField.getText())); saveValues(); JOptionPane.showMessageDialog(this, \"Student Successfully Registered\"); } } public void saveValues() throws SQLException { User str = list.get(list.size()-1); Connection connection = null; Class.forName(\"com.mysql.jdbc.Driver\"); String url = \"jdbc:mysql://localhost/testdb\"; String user = \"root\"; String password = \"\"; connection = DriverManager.getConnection(url, user, password); Statement stmt = connection.createStatement(); String sql = \"INSERT INTO students(str.fname,str.midname,str.lastname,str.course) \"; stmt.execute(sql); } public static void main(String[] args) { new StudentRegistration(); } }.

Create a student record management system using linked list and queu.pdf

info309708

Coca-Cola companyStrategic Goals and Objectivesi. Objectives are.pdf

info309708

C programming. Answer question only in C code Ninth: Deletion with Binary Search Tree (20 points) In the ninth part, you will extend the binary search tree in the eighth part to support the deletion of a node. The deletion of a node is slightly trickier compared to the search and insert in the eighth The deletion is straightforward if the node to be deleted has only one child. You make the parent of the node to be deleted point to that child. In this scenario, special attention must be paid only when the node to be deleted is the root Deleting a node with two children requires some more work. In this case, you must find the minimum element in the right subtree of the node to be deleted. Then you insert that node in the place where the node to be deleted was. This process needs to be repeated to delete the minimum node that was just moved In either case, if the node to be deleted is the root, you must update the pointer to the root to point to the new root node Input format: This program takes a file name as argument from the command line. The file is either blank or contains successive lines of input. Each line contains a character, \'i or \'d\' followed by a tab and an integer. For each line that starts with \'i\', your program should insert that number in the binary search tree if it is not already there. If the line starts with a \'s, your program should search for that value. If the line starts with a \'d\', your program should delete that value from the tree output format: For each line in the input file, your program should print the status/result of the operation. For insert and search, the output is the same as in the Eighth Part: For an insert operation, the program should print either \"inserted\" with a single space followed by a number the height of the inserted mode in the tree, or \"duplicate\" if the value is already present in the tree. The height of the root node is 1. For a search, the program should either print \"present\" followed by the height of the node, or absent\" based on the outcome of the search. For a delete, the program should print \"success or \"fail\" based on the whether the value was present or not. Again, as in the Eight Part, your program should print \"error\" (and nothing else) if the file does not exist or for input lines with improper structure Example Execution: Lets assume we have a file filel.txt with the following contents: i 5 i 3 i 4 i 1 i 6 i 2 s 1 d 3 s 2 Executing the program in the following fashion should produce the output shown below: Solution // C program to demonstrate delete operation in binary search tree #include #include struct node { int key; struct node *left, *right; }; // A utility function to create a new BST node struct node *newNode(int item) { struct node *temp = (struct node *)malloc(sizeof(struct node)); temp->key = item; temp->left = temp->right = NULL; return temp; } // A utility function to do inorder traversal of BST void inorder(struct node *root) { if (root != NULL) .

C programming. Answer question only in C code Ninth Deletion with B.pdf

info309708

Biology Lab: The poisonous wastes of diptheria germs are called (A) antitoxins (B) antibodies (C) immunities (D) toxins Solution Biology Lab ANS: (D) toxins Explanation: A toxin is a poisonous substance which produced by some bacteria or an organism Diphtheria is mainly caused by the corynebacterium diphtheriae bacteria. It is a gram positive, non-endospore forming, pleiomorphic bacteria. Poisonous wastes of diptheria germs (C.diphtheriae) can produce diphtheria toxin. It causes sore throat and fever. This toxins prevents protein synthesis and causes cell death..

Biology LabThe poisonous wastes of diptheria germs are called (A).pdf

info309708

Aside from the expansion of industrial capitalism, what factors affected American development during the late 19th centry? How important are those factors in comparison to capitalism’s growth? Solution ANSWER: During the late nineteenth Americans believed for the expansion of national borders in order to keep the America running upright. Moreover, the Americans believed that the United States was the most powerful of nations, and that they could take any land they pleased. The expansion of American started after the Civil War. The war made substantial use of the telegraph and railroads. Moreover there was a crucial expansion of railroads with a motive on combing the Atlantic and Pacific coasts, with movement. This growing population and an advanced transportation is one of the main causes of expansions of America in late 19th century. Europeans with surplus wealth joined Americans in investing the economic expansion of the nation. Also the farmers during this time required arable land for livestock and crops which was unavailable due to overcrowding. Thus financial panics uprooted them and sent them west for a new start. Furthermore, the American government also motivated the citizens to move west, with the motive of acquisition of new territory from foreign powers. The above discussed factors are different from the factors in capitalism’s growth. Capitalism is a system in an economy where private entities own the factors of production namely entrepreneurship, natural resources, capital goods and labor; and ensures that an economy will produce the most desired products at an acceptable price. The owners of capital goods, entrepreneurship and natural resources exercise control through companies..

Aside from the expansion of industrial capitalism, what factors affe.pdf

info309708

Yates (2009) notes that unions have a purpose broader than serving their members. What arguments does he make in that regard? What do you think of his arguments, and why? Solution Yates says that unions actually mean better pay, benefits, and slao working conditions for their members and they indeed force employers to treat employees with dignity and respect; and at their maximum best, they provide the workers to work in the society with utmost satisfaction on the whole. Yates used simple language with suffiecient examples to tell that how unions popped out to be helpful at certain troublesome instants on the whole. His arguments exactly carried on to tell the importance of unions and he advises all the workers to join in the unions which would be ultimately beneficial to them on the whole..

Yates (2009) notes that unions have a purpose broader than serving t.pdf

info309708

More from info309708 (20)