1. CISCO PACKET TRACER
Software Engr. Imdad Manik

2. CISCO PACKET TARCER:Cisco
Packet Tracer is a powerful
network simulation program that allows
students to experiment with network
behavior

3. INTERFACE OF PACKET
TRACER:-

4. FIRST NETWORK:Take
one router, one switch, and two
PCs and connect both PCs with the
switch by using copper straight-through
wire.
Then router connect with switch.

5. FIRST NETWORK:-

6. Assigning IP:If you want to computers communicate
network in the network they must have
same IP address.
The IP ranges or class is:
10.0.01
To
10.255.255.254
172.16.0.1
To
172.31.255.254
192.168.0.1
To
192.168.255.254

7. Assign
IP address
To PCs in first
network

8. CLICK ON PC AND GO TO DESKTOP.

9. Again click on IP configuration.

10. Insert IP address and subnet gateway
automatically generate

11. IP address of second PC.

12. Insert IP address on router

13. THIS IS A FIRST COMPLETE
NETWORK:

14. Same as pervious :
This two networks are
same as pervious
which I have discussed.

15. SECOND NETWORK

16. THIRD NETWORK:

17. Connect routers by using fiber.

18. If you want to routers
communicate in the network
they must be assign IP address

19. Assigning Ips in routers

20. Click on router and insert IP

21. After insert IP in router you add network
Ips in RIP routing.

22. same like other router will be
connects and Assign the IPs for
each network and list down into
RIP.

23. THIS IS A MY COMPLETE NETWORK 

24. If I send packet from one network to third
network then I checked through command.
receive
r
sender

25. Check the Ping of 3rd Network

26. Now we can send packets through
that scenario which I have discussed
THANK YOU
Imdadullah
Malik Shamraiz