Apollon - 22/5/12 - 09:00 - User-driven Open Innovation Ecosystems
Wba3 Connection Management Nt
1. Connection management
Het connection management is een software component die zorgt voor de visualisatie en het beheer
van de beschikbare bandbreedte in het wireless mesh netwerk. Gebruikers en systeemcomponenten
kunnen een verbinding tussen 2 punten in het netwerk aanvragen met een gegarandeerde minimale
bandbreedte. Het connection management zal ervoor zorgen dat zoveel mogelijk van de gevraagde
bandbreedte gereserveerd kan worden voor de aanvrager. Eens gereserveerd (en bij afwezigheid van
netwerkproblemen) zal de aanvrager gegarandeerd over de gevraagde bandbreedte beschikken.
Wanneer in het netwerk echter links uitvallen en de capaciteit van het netwerk daalt, zal het
connection management ervoor zorgen dat alle aangevraagde verbindingen nog steeds kunnen
gerouteerd worden in het netwerk maar zullen sommige verbindingen een kleinere hoeveelheid
bandbreedte toegewezen krijgen. De gebruikers van die verbindingen zullen de gegevens dus aan een
iets lagere snelheid moeten uitsturen. Naast het beheer van de connecties bevat het connection
management ook een visualisatie van de verschillende connecties en een visualisatie van de
aanwezige nodes en links in het netwerk. Zo is men ook op de hoogte van de toestand van het
fysieke netwerk.
2. Connection management
The connection management is a software component that provides a visualization of and allows the
management of the available bandwidth in the wireless mesh network.
Users of the application and other components in the system can request a connection between two
endpoints in the network to obtain a guaranteed minimal bandwidth between those two endpoints.
The connection management will make sure that as much of the requested bandwidth is reserved for
the inquirer. Once the bandwidth is reserved and no network errors occur, the inquirer will have
control of the requested bandwidth.
However, when link failures occur and the network capacity drops, the connection management will
make sure that all requested connections can still be routed through the network. Some connections
though will be assigned a lower bandwidth that originally was requested. In order to make this
happen, the owner of the connection must also adjust his sending rate. Next to the management of
the connections, the application also provides a view of the different nodes and links in the network.
This way, the user is also aware of the physical state of the network.