Describe the advantages and disadvantages of the four standard acces.pdf

•

0 likes•2 views

Consider the following pedigree for Hunter Syndrome, a sex-linked, recessive condition leading to loss of hearing and cardiac problems among other symptoms. What is the probability that individuals IV 3 and IV 4 will have a child with Hunter syndrome? O Solution Answer is 25% Due to the chances of become a carrier in III rd generation female is 50 % so if the female in IIIrd generation is a carrier then the IV 3 and IV 4 having a Huntington syndrome is 25%..

Education

Describe the advantages and disadvantages of the four standard access control models:
Solution
Access control is the ability to allow only authorized users, programs or processes system or
resource to be accessed.It generates or denies requests according to a particular security model,
of certain permissions to access a resource.It is a set of procedures which is performed by
hardware, software and administrators so that they can monitor access and identify users
requesting access.
Advantages:
Access control systems or model provide the essential services of authorization, identification
and authentication (I&A), access approval, and accountability
authorization specifies what a subject can do
identification and authentication ensure that only legitimate subjects can log on to a system.
access approval grants access during operations, by association of users with the resources that
they are allowed to access, based on the authorization policy.
accountability identifies what a subject (or all subjects associated with a user) did.
Disadvantage
There arenot a lot of deployments because it is still kind of new, and because you only get the
full benefits when you deploy sufficient infrastructure. Vendors are still playing with the right
implementation of the right protocols. There is a lot left to be worked out.

Similar to Describe the advantages and disadvantages of the four standard acces.pdf

Chapter006

Jeanie Delos Arcos

Software Engineering unit 4

Abhimanyu Mishra

Automated login method selection in a multi modal authentication - login meth...

Conference Papers

Automated login method selection in a multi modal authentication - login meth...

Conference Papers

S5-Authorization

zakieh alizadeh

Injaz Startups Project - Incubation Online Support System Guide

Ayman Basheer (BRANDA)

Access Control System_ An Overview - Bahaa Abdul Hadi.pdf

Bahaa Abdulhadi

Defending broken access control in .NET

Supriya G

4_5949547032388570388.ppt

MohammedMohammed578197

SA Chapter 13

Nuth Otanasap

Webinar: How to Ace Your SaaS-based EDC System Validation for Sponsors and CROs

Statistics & Data Corporation

EVALUATING SOFTWAREQUALITY : A QUANTITATIVEAPPROACH

Priyanka Karancy

Exploring Different Types of QA Methods_ An Overview.pdf

Polyxer Systems

Computer system validation

ShameerAbid

The process of developing a mobile app is intricate, including numerous parties and different elements. Although creating applications is fascinating, there are numerous difficulties to overcome, one of which is bug tracking. Bugs can negatively impact the usability and operation of your software. Putting in place a bug-tracking system is crucial to making sure your mobile development project goes without a hitch. You can learn more about this on: https://apidots.com/how-to-create-a-bug-tracking-system-for-mobile-development/

Development of Bug Tracking System in USA-Apidots

API DOTS

Software Testing

Mata Gujri College, FatehGarh Sahib ( Harsimrat Deo )

VBA Final Project

jwjablonski

Explanation of the most common types of technical risks

kevinmass30

Software testing is a critical component of the software development life cycle, playing a pivotal role in ensuring the quality, reliability, and functionality of a software application. In a world where technology is constantly evolving, and user expectations are soaring, comprehensive software testing has become more vital than ever. In this article, we will delve into the importance of software testing, its various types, methodologies, and best practices that organizations should adopt to deliver top-notch software products.

The Essential Guide to Software Testing.pdf

Kajal Digital

Sftwre engg.testng

kanika20071990

Similar to Describe the advantages and disadvantages of the four standard acces.pdf (20)

Chapter006

Software Engineering unit 4

Automated login method selection in a multi modal authentication - login meth...

S5-Authorization

Injaz Startups Project - Incubation Online Support System Guide

Access Control System_ An Overview - Bahaa Abdul Hadi.pdf

Defending broken access control in .NET

4_5949547032388570388.ppt

SA Chapter 13

Webinar: How to Ace Your SaaS-based EDC System Validation for Sponsors and CROs

EVALUATING SOFTWAREQUALITY : A QUANTITATIVEAPPROACH

Exploring Different Types of QA Methods_ An Overview.pdf

Computer system validation

Development of Bug Tracking System in USA-Apidots

Software Testing

VBA Final Project

Explanation of the most common types of technical risks

The Essential Guide to Software Testing.pdf

Sftwre engg.testng

More from fatoryoutlets

ually on June 30 and December 31. (FV of $1. PV of $1. FVA of $1. on June 30 No 01, 2018 on 2018 3,984,750 31, 2018 Solution Par value of investment 75000000 Semi annual cash interest 3750000 (75000000*10%*6/12) Annuity factor for 20 period for 6% 11.4699 PV for 20th period 0.3118 Present value of Interest 43012125 Present value of Maturity amount 23385000 Issue price 66397125 Amort Schedule: Date Interest Interest Discount Unamortized Book value Received Revenue Amortized Discount 01.01.18 8602875 66397125 30.06.18 3750000 3983828 233828 8369047 66630953 31.12.18 3750000 3997857 247857 8121190 66878810 Journal entries: Date Accounts title and explanations Debit $ Credit $ 01.01.18 Investment in bonds Dr. 75000000 Cash account 66397125 Discount on bonds investment 8602875 30.06.18 Cash Account Dr. 3750000 Discount on bonds investment Account Dr. 233828 Interest revenue Account 3983828 31.12.18 Cash Account Dr. 3750000 Discount on bonds investment Account Dr. 247857 Interest revenue Account 3997857.

Write an informal paper that is exactly 3 pages long not counting th.pdf

fatoryoutlets

True or false. If Ax = 0 has an infinite number of solutions then every system Ax = b is consistent. If true give a proof, otherwise give a counterexample. Solution Infinite solution of Ax=0 occurs when number of equations are less than number of variables. same will be true for Ax=b because after adding non zero constant, number of equations will still be less than number of variables. Hence solution exists for Ax=b which means Ax=b is consistent is true..

Write a C program to find factorial of an integer n, where the user .pdf

fatoryoutlets

When was the black body mutation in drosophila melanogaster discover.pdf

fatoryoutlets

The right and left sternocleidomastoid muscles of humans originate on the upper surfaces of breast bone and collar bones, pass along both sides of the neck, and insert just behind the ears on the mastoid processes. Describe the action that occurs if both sides contract together. Solution If one sternocleido mastokd contracts, it flexes the cervical vertibral column to the same side and rotates the head to the opposite side. When both the sides contract together , it flexes the neck amd extends the head..

What is it that consumer researchers try to find among varying cultu.pdf

fatoryoutlets

The number of milligrams of a drug in a person\'s body after t hours is given function N(t) = 18 middot e^-04t a) Find the amount of the drug after 5 hours. (Include units and round to two decimal places) b) When will the amount of the drug be 0.3 milligram? (Include units and round to two the nearest whole number) Represent the expression as a single logarithm with the coefficient 1. Simplify your Solution 1) N(t) = 18e^(-0.4t) t = 5hrs ; N(5) = 18e^(-0.4*5) = 18*0.135335 = 2.46 mg 2) 0.3 = 18e^(-0.4t) 0.3/18 = e^-0.4t Take natural log on both sides: ln(0.3/18)/-0.4 = t t= 10.235 = 10.24 = 10 hrs.

What are pros and cons of Symantec endpoint security softwareSo.pdf

fatoryoutlets

a) find the slope of the line and interpret the slope The slope of the line is ? b) interpret the slope For every 2 unit change in x the y change is ____ units ? Solution Ans: Here we are given 2 points (0,0) & (2,1) We calculate the linear slope by using the formula: (y2-y1)/(x2-x1) Which here translates to (1-0)/(2-0) = 1/2 = 0.5 As the slope is positive we can interpret that the quantity plotted on y axis increases as the quantity plotted on x axis increases. As we know the slope (y2-y2)/(x2-x1) = 0.5 which gives (y2-y1) = 0.5×(x2-x1) When x2-x1 = 2 units then y2-y1 = 0.5×2 = 1 unit So for every 2 units change in x there is 1 unit change in y..

All of the following describe the International Accounting Standard .pdf

fatoryoutlets

Suppose that many producers guess that there will be deflation, writing their contracts accordingly.12.1.In the short run (compared to the original long run equilibrium), the economy will experience aA. CPI staying the same and GDP decrease.B. CPI decrease and GDP increase.C. CPI staying the same and GDP staying the same.D. CPI increase and GDP staying the same.E. CPI staying the same and GDP increase.F. CPI decrease and GDP staying the same.G. CPI increase and GDP increase.H. CPI decrease and GDP decrease.I. CPI increase and GDP decrease.12.2.In the long run (compared to the original long run equilibrium), the economy will experience aA. CPI increase and GDP staying the same.B. CPI decrease and GDP decrease.C. CPI staying the same and GDP staying the same.D. CPI staying the same and GDP decrease.E. CPI increase and GDP decrease.F. CPI decrease and GDP staying the same.G. CPI staying the same and GDP increase.H. CPI decrease and GDP increase.I. CPI increase and GDP increase.Suppose that many producers guess that there will be deflation, writing their contracts accordingly. Solution a) At the time of deflation, the CPI will decrease and due to lack of demand, the GDP will fall as well. The answer is \"H\", The CPI decrease the GDP decrease. b) In the long run, the CPI will increase with the increasing demand and GDP will increase too. The answer is \"I\", CPI increases GDP increases..

The right and left sternocleidomastoid muscles of humans originate o.pdf

fatoryoutlets

Select the correct answer. 6.41 5.41 5.409 5.411 Solution 1)Find the partial sumof the seriesrounded to the nearest thousandth. Question 7 options: n an=5/4^n sum 1 1.2500 1.2500 2 0.3125 1.5625 3 0.0781 1.6406 4 0.0195 1.6602 5 0.0049 1.6650 6 0.0012 1.6663 7 0.0003 1.6666 8 0.0001 1.6666 9 0.0000 1.6667 10 0.0000 1.6667 11 0.0000 1.6667 none of answers fit 1.667 2)Given the series: and. Determine whether each series is convergent or divergent. Question 8 options: a) converges because cos ^2(10n)is greater than or equal to zero and less than 1 so series a is 1 so it converges and so does a b diverges because cos is greater than or equal to -1 and less than or equal to 1, which does not converge to 0, so b diverges ans Ais convergent,Bis divergent. 3)Determine whether the series converges or diverges. NO SERIES Select the correct answer. Question 9 options: neither diverges converges 4)Determine whether the sequence converges or diverges. diverges because n(n-6) goes to infinity as n goes to infinity Question 10 options: converges diverges.

The code in image3.cpp has the error as shown above, could you help .pdf

fatoryoutlets

Save Save Save Makes the production function steeper. Makes the production function flatter. Move the economy along the production function. Shift up the production function. Solution 7) Production function=y=f(capital per worker). So when capital per worker has increased the slope of the production function will be increased. So increase capital per worker makes the production function steeper. The first option is correct. 8) When technology improved economy can produce more output with same input that is capital per worker will be increased. The production function becomes steeper. The third option is correct. 9) If technology advances, more output can be produced with same inputs. The fourth option is correct..

the ability of the cardiac muscle cells to fire on their own is .pdf

fatoryoutlets

Sargent Corporation bought equipment on January 1, 2013. The equipment cost $180,000 and had an expected salvage value of $30,000. The life of the equipment was estimated to be 6 years. The book value of the equipment at the beginning of the third year using straight-line depreciation would be . C $180,000. $150,000. $130,000. $50,000. Solution As per the information provided, Sargent Corporation bought an equipment on Jan 1, 2013 for $180000 with 6 years life and salvage value of $30000. Therefore, depreciation expense every year as per Straight line method would be:- Equipment cost = $180000 LESS:- Salvage value = $30000 Amount on which depriciation is to be charged =$150000 Now, depreciation as per straight line method = $150000 / 6 years = $25000 every year Now, book value of Equipment at the beginning of third year is:- Equipment cost = $180000 LESS :- Depreciation for first and second year = $25000 x 2 years = $50000 Therefore, book value at begginning of third year =$130000 Hence, as per the problem \"Option C\" is correct with book value of $130000..

Template LinkedList;I am using templates to make some linkedLists.pdf

fatoryoutlets

Road racing bikes have special seats that are flexible with minimum contact with cyclists. These seats are called toupe saddles. Roscoe Specialty Equipment makes 100 of these seats per day with the following resources. Labor: 40 hours per day @ $15.00 per hour Raw material: 20 kilograms per day @ $1.00 per kg Energy: $200 per day Capital costs: $500 per day A) What is the labor productivity per labor hour for these toupe saddles at Roscoe? B) What is the multifactor productivity for these toupe saddles at Roscoe? C) What is the % change in multifactor productivity if Roscoe can reduce the energy bill by $150 per day without cutting production or changing any other inputs? Solution A) Labor productivity = Total Output / Total Man-Hours = 100 / 40 = 2.5 units per labor hour B) Multifactor productivity = Quality produced at standard price/(Labor cost + Material cost + Overhead) = 100 / ( 40 x $ 15 + 20 x $ 1 + $ 200 + $ 500) = 0.076 per $ of input C) New MFP = 100 / ( 40 x $ 15 + 20 x $ 1 + $ 50 + $ 500) = 0.085 per $ of input Percentage increase in Multi Factor Productivity = (0.085 - 0.076) / 0.076 = 11.84% Increase in Multi Factor Productivity..

Surface water entering the North Atlantic may have a temperature of .pdf

fatoryoutlets

Research article reports will be completed for evaluation using the guidelines identified below. Chapter concepts should be included throughout all written assignments - Performance Management / Employee Development / Employee Separation and Retention Each report is expected to be between 500 and 700 words. Reference the article using APA format. Include a link to the article if online. Wikipedia is not recognized as a quality source. Concisely and precisely summarize the article. Identify the key HR issues and correlated the contents of the article to the weekly reading assignment. Identify questions that you have developed as a result of your analysis. Describe how the article’s subject contributes to the subject of HR. If you were the author writing the article, identify what would you change and why. Solution Performance Management - Definition Performance management is an ongoing process of communication between a supervisor and an employee that occurs throughout the year, in support of accomplishing the strategic objectives of the organization. The communication process includes clarifying expectations, setting objectives, identifying goals, providing feedback, and reviewing results. Managing Employee Performance – The Cycle Overseeing performance and providing feedback is not an isolated event, focused in an annual performance review. It is an ongoing process that takes place throughout the year. The Performance Management process is a cycle, with discussions varying year-to-year based on changing objectives. The cycle includes Planning, Checking-In, and Review. Components of Performance Management System Any effective performance management system includes the following components: Employee Development Individuals in an organization form its vital resource and must be valued, nurtured and retained. Employees are the most valuable assets and truly the backbone of an organization. Every employee in his/her own way contributes towards the success or failure of an organization. Without employees in an organization, even the most powerful machinery with the latest technology would not function. Employees should not treat their organization as a mere source of earning money. Remember, your job is not just to come in the morning, leave in the evening and receive your paycheck. On the other hand employers should not treat their employees as slaves. Employers must invest their time and resources in training and developing their workforce for them to become indispensable resources later on. Employees should be developed and prepared to face even the worst situations. What is Employee Development ? Employee development is a joint initiative of the employee as well as the employer to upgrade the existing skills and knowledge of an individual. It is of utmost importance for employees to keep themselves abreast with the latest developments in the industry to survive the fierce competition. Believe me, if you are not aware of what is happening aroun.

Suppose the rate of plant growth on Isle Royale supported an equilib.pdf

fatoryoutlets

Please see attached case, Williams v. State. Please read and provide a 1 page typed summary discussing the facts, what the Court decided and why they ruled that way. link: http://opinions.aoc.arkansas.gov/weblink8/0/doc/207221/Page2.aspx Solution Title and Citation: Anderson V. State 102- Cite as 354 Ark. 102 (2003) Facts of the Case: Issues: The appellant professes that he was denied fair trial when the trial court allowed the State court to cross-examine the felonies that were more than 10 year old. Reasoning: Based on the above, we cannot say that the trial court abused its discretion by excluding testimony about specific instances of violent conduct by the victim. Appellant\'s defense was self-defense, and he was allowed to testify that he was afraid of the victim. Moreover, the incidents proffered to demonstrate violent conduct on the part of the victim would have amounted to cumulative testimony. As such, for these reasons and because the decedent\'s character is not an essential element of a self-defense for first-degree murder, we hold that the trial court did not abuse its discretion in this regard..

Q1. public void operationZ() throws StackUnderflowException { .pdf

fatoryoutlets

Part C please Determine if the following set is a vector space under the usual addition and scalar multiplication. If it is, find its dimension. If it is not, answer by NO. Justify your answer. The set of all numbers of the form c_1 e + c_2 pi, where c_1, c_2 Element R^1 All vectors x in R^5 such that |x_1 + x_5| + |x_2 + x_4| = 0 All 3 times 3 matrices such that each such mat has at least one irrational entry. Solution C) Let S denote the set. Since the matrices are of order 3x3 with atleast one irrational entry. As 0 is not an irrational number so the zero matrix is not an element of the given set S. So there is no matrix O in S such that for any A in S O+A=A+O Hence there is no identity element in the given set S Hence it\'s not a vector space.

Print Calculator Question 18 of 20 Sapling Learning Map do ment of Lu.pdf

fatoryoutlets

National Express reports the following costs and expenses in June 2017 for its delivery service. Determine the total amount of (a) delivery service (product) costs and (b) period costs. Indirect materials$7,100Drivers’ salaries$16,300Depreciation on delivery equipment11,900Advertising5,500Dispatcher’s salary5,810Delivery equipment repairs310Property taxes on office building950Office supplies700CEO’s salary12,100Office utilities1,100Gas and oil for delivery trucks2,700Repairs on office equipment210 Solution a) Delivery service (product) costs: b) Period costs:Indirect materials$7,100Depreciation on delivery equipment$11,900Dispatcher\'s salary$5,810Gas and oil for delivery trucks$2,700Drivers\' salaries$16,300Delivery equipment repairs $310Total$44,120.

Part A 1. Solid product forms during the addition of the bleach solu.pdf

fatoryoutlets

Mosquitoes are annoying insects. To eliminate mosquito larvae, a certain granular substance can be applied to standing water in a ratio of 1 tsp per 30 sq ft of standing water. At this rate, find how many teaspoons of granules used for 360 sq ft. If 3 tsp = 1 tbsp, how many tablespoons of be used? a. teaspoons of granules must be used. b. tablespoons of granules must be used. Solution To eliminate the mosquito larvae, we need 1 teaspoon for every 30 square-foot of standing water. For 360 sq ft we need 12 teaspoon s If 3 teaspoons = 1 tablespoon, then we need 4 tablespoons..

Only 15 of the carbon-14 in a wooden bowl remains. How old is the b.pdf

fatoryoutlets

Many mathematical problems require the addition, subtraction, and multiplication of two matrices. Write an ADT Matrix. You may use the following class definition. const int MAX_ROWS = 10; const int MAX_COLS = 10; class MatrixType { public: MatrixType(); void MakeEmpty(); void SetSize(int rowsSize, int colSize); void StoreItem(int item, int row, int col); void Add(MatrixType otherOperand, MatrixType& result); void Sub(MatrixType otherOperand, MatrixType& result); void Mult(MatrixType otherOperand, MatrixType& result); void Print(ofstream& outfile); bool AddSubCompatible(MatrixType otherOperand); bool MultCompatible(MatrixType otherOperand); private: int values[MAX_ROWS][MAX_COLS]; int numRows; int numCols; }; Before you start looking at how to implement this class, you must determine and document the appropriate preconditions and postconditions for each operation. Note that the class provides the member functions to allow the client to determine if the binary matrix operations are possible. Before this class can become a permanent part of your program library, it must be thoroughly tested. Write a menu driven testing program to test your MatrixType. Test Driver The test driver should handle the following options. (See processing notes for definition of ). GetNewMatrix Number of rows and number of columns are on the next line. Values for each row and column AddMatrices Add first and second, leaving the result in the third SubMatrices Subtract second from first, leaving the result in the third MultiplyMatrices Multiply first and second, leaving the result in the third PrintMatrix Print the matrix one row per line on DataOut Quit Processing Notes 1. is a number between 0 and 9. This value is used as an index into an array of MatrixType. 2. The main function must include a Switch statement where the case expression is a user-defined enumeration type. This means that the command is recognized and its enumeration equivalent is sent back to be used in the case statement. 3. The driver must ensure the preconditions of the member functions of MatrixType. Throw an exception if an error occurs and continue processing. Solution #include #include using namespace std; struct matrixType{ int matDimension; int matValues[10][10]; }; class MatrixADT{ private: matrixType resultMatrix; public: void intializeResultMatrix(int); matrixType add(matrixType, matrixType); matrixType subtract(matrixType,matrixType); matrixType multiply(matrixType,matrixType); void printResult(); }; matrixType MatrixADT::add(matrixType M1, matrixType M2){ } matrixType MatrixADT::subtract(matrixType M1, matrixType M2){ } matrixType MatrixADT::multiply(matrixType M1, matrixType M2){ } void MatrixADT::intializeResultMatrix(int dim){ } int main(){ MatrixADT maX; matrixType M1, M2; char op; int dim; maX.printResult(); } void MatrixADT::printResult(){ int i,j; for (i=0;i for (j=0; j cout<.

Note Use Java Write a web server that is capable of processing only.pdf

fatoryoutlets

Lussier and Achua (2012) propose that it is important to understand individuals\' personalities when leading. How does the Big Five Model of Personality help a leader lead? Solution The big five personality traits are As Lussier and Achua (2012) proposes the above factors is pertinent for a leader to understand the personality traits of the team members. If the leader does not understand these traits of the individual, then the leader needs to practice an autocratic leadership style which exhibits negativity in the leader. A good leader should work in harmony with the team members and should not promote any negativism with them. An autocratic leadership style results in high attrition rate. With the big five model, the leader can depict accurately the patterns of behavior of individuals over a period of time. The leader also would be able to identify the preferences, emotional mood and dependability factors based on these five models. These are very important to lead a team of members because the leader deals with a conflict of individuals and not robots. For example, the U.S Air force psychologists used the big five model to identify the relationship between agreeableness and stability. To conclude, the big five model uses strategies to assess, diagnose and develop the personality of individuals. These factors are imperative for understanding the individuals to lead the teams effectively to achieve organizational goals..

Negotiations are not usually faster in Deal focused cultures than re.pdf

fatoryoutlets

9. The tort of assault and the tort of battery A) can occur independently or together 8) require proof of each of the separate elements of negligence. C) cannot both occur in the same incident D) are strict liability torts E) are two names for the same tort 9) 10. Assuming that statutory requirements are met, what is protected under merchant protection statutes? A) Merchants are protected from product disparagement claims of their competitors. B) Customers are protected from the negligent conduct of merchants. C) Merchants are protected from false imprisonment clalms of persons detained on suspicion of shoplifting D) Merchants are protected from the international torts of their customers E) Merchants are protected from product disparagement claims of their suppliers What differs in a defamation suit when the plaintiff is a public figure, as oppo sed to when the plaintiff is not a public figure? 11. A) The plaintiff must prove that the statement was made with malice. B) The plaintiff can recover even when the statement is a mere opinion. C) The plaintiff need not prove actual injury to the reputation. D) Punitive damages are available. E) The plaintiff must prove that the statement was made in writing. 12. Which of the following is true about the tort of invasion of the right to privacy? Once a fact has become public, ts disclosure cannot thereafter support a claim for the invasion of the right to privacy. A) B) The tort requires that the defendant entered the plaintiff\'s home or place of business to acquire the information that was disclosed C) The tort is actionable only by public figures D) True statements or facts that are disclosed can support a claim for the invasion of the right to privacy. Solution 9. a as they can occur together but also independently, assault is the threat of immediate harm while battery is the harmful physical contact 10. d 11. a defamation is the publication of a statement which is held false until it is proved 12. d.

9. The tort of assault and the tort of battery A) can occur independe.pdf

fatoryoutlets

In JAVA... I need help on what is asked in the questions that are bolded For this problem you must define a simple generic interface PairInterface, and two implementations of the interface, BasicPair and ArrayPair. Define a Java interface named PairInterface. A class that implements this interface allows creation of an object that holds a “pair” of objects of a specified type—these are referred to as the “first” object and the “second” object of the pair. We assume that classes implementing PairInterface provide constructors that accept as arguments the values of the pair of objects. The PairInterface interface should require both setters and getters for the first and second objects. The actual type of the objects in the pair is specified when the PairInterface object is instantiated. Therefore, both the PairInterface interface and the classes that implement it should be generic. Suppose a class named BasicPair implements the PairInterfaceinterface. A simple sample application that uses BasicPair is shown here. Its output would be \"apple orange.\" Create a class called BasicPair that implements the PairInterface interface. This class should use two instance variables, first and second, to represent the two objects of the pair. Create a test driver application that demonstrates that the BasicPair class works correctly. Create a class called ArrayPair that implements the PairInterface interface. This class should use an array10 of size 2 to represent the two objects of the pair. Create a test driver application that demonstrates that the ArrayPair class works correctly. Solution package javaapplication5; /** * * @author Rashmi Tiwari */ interface PairInterface{ void setFirst(String first); void setSecond(String second); String getFirst(); String getSecond(); } class BasicPair implements PairInterface{ String first; String second; BasicPair(String first,String second){ this.first=first; this.second=second; } @Override public String getFirst() { return first; } @Override public String getSecond() { return second; } @Override public void setFirst(Object first ) { this.first=(String)first; } @Override public void setSecond(Object second) { this.second=(String)second; } } class ArrayPair implements PairInterface{ String first; String second; ArrayPair(String first,String second){ this.first=first; this.second=second; } @Override public String getFirst() { return first; } @Override public String getSecond() { return second; } @Override public void setFirst(Object first ) { this.first=(String)first; } @Override public void setSecond(Object second) { this.second=(String)second; } } class DriverApplication { public static void main(String args[]){ PairInterface myPair = new BasicPair<>(\"apple\", \"peach\"); System.out.print(myPair.getFirst() + \" \"); myPair.setSecond(\"orange\"); System.out.println(myPair.getSecond()); ArrayPair[] array2=new ArrayPair[2]; array2[0]=new ArrayPair(\"apple\",\"peach\"); System.out.print(array2[0].getFirst()+\" \"); arra.

Jj_numjnamecityj1SorterParisj2PunchRomej3Reade.pdf

fatoryoutlets

More from fatoryoutlets (20)