1. CONTACT@FASTFILLSYSTEMS.COM • 801.491.3600
MATERIALS:
Fast Fill Systems manufactures all pressureless
components from metal alloys in place of the
plastic used in the Shaw Development system. This
increases the overall durability in all conditions and
temperatures and prevents cracking and failures
caused by extreme vibrations and temperatures. The
float in the vent/level control unit is diesel resistant
closed cell foam to ensure reliability.
FLOW RATE:
The free flow area of the Fast Fill Systems inlet
valve is much larger than that of the Shaw
direct mount valve. The Fast Fill Systems inlet
valve has a 33% larger flow area. This reduces
backpressure on the nozzle and allows for higher
flow rates and lower pressure drops across the system.
AIR FILTRATION:
All Fast Fill Systems Pressureless Systems are fitted with
our Filter Vent assembly. This ensures that only 3 microns
of filtered air enters the tank and that your filter media is
protected from fuel vapors and fluid. This prevents
clogged filters, which can lead to low power issues or
collapsed tanks.
Filters should be checked every 250 hours for air
flow to ensure they are clear and replaced every 500
hours.
CONFIGURATIONS AND COMPONENTS:
The variety and versatility of the Fast Fill Systems
Pressureless System allows for easy installation on
most pieces of equipment. We offer a wide variety
of configurations as direct replacement for OEM
components to ensure the system is installed properly and
will be the best fit for each piece of equipment.
Visit our website for more information on our
pressureless system at:
Fast Fill System:
Max: 211 GPM
Shaw Development:
Max: 150 GPM
WWW.FASTFILLSYSTEMS.COM
FAST FILL
SYSTEMS
PRESSURELSS
SHAW
DEVELOPEMENT
PRESSURELESS
Shaw’s Development
Pressureless System
Fast Fill Systems
Pressureless System