WATERGUARD EP is a two part, solvent free, epoxy resin based waterproofing coating for terrace, balconies, roof slabs & potable water tanks. The cured film is extremely tough & has a smooth, hard, semiglossy surface with good slip resistant property. WATERGUARD EP has excellent adhesion property & ensures flexibility to take care of thermal expansion contraction.

1. WATERGUARD EP
A THIXOTROPIC, HIGH PERFORMANCE,
HYGIENIC, WATERPROOF COATING

2. Benefits
 Ensures watertightness
 Solvent free
 Excellent adhesion to the concrete surface
 Flexible, abrasion resistant
 Can be used on potable water tank
 Good mechanical & wear resistant property
 Available in various colours.

3. Uses
WATERGUARD EP ensures excellent waterproofing membrane gives
tough, abrasion resistant coating, which can be used for various kinds of
concrete leakage areas like roof slabs, water tanks, swimming pools,
sewage tanks, retaining walls, lift shafts etc.

4. Description
WATERGUARD EP is a two part, solvent free, epoxy resin based
waterproofing coating for terrace, balconies, roof slabs & potable water
tanks. The cured film is extremely tough & has a smooth, hard, semiglossy
surface with good slip resistant property. WATERGUARD EP has excellent
adhesion property & ensures flexibility to take care of thermal expansion
contraction.

5. Properties
Colour : Off white, Grey, Light Green
(Special shade on Request)
Pot Life : 45-50 minutes at 30ºC
Flexibility : 3.9%
Flexural Strength : 30 Mpa
Temperature Range In Service : 10ºC to 70ºC
Curing At 30ºC : Touch dry 2 hrs
Foot Traffic : 24 hrs
Full Cure : 5 days at 30ºC.

6. Packing & Coverage
WATERGUARD EP is supplied in 5 Kg. Pack (Resin + Hardner) which
covers approximately 8-10 m²/ two coat

7. Packing & Coverage
WATERGUARD EP is supplied in 5 Kg. Pack (Resin + Hardner) which
covers approximately 8-10 m²/ two coat