replacing a toner cartridge to LFP printer

1. How to Change A
To replace the toner cartridge:
CAUTION: Toner identified for use in the XEROX
1. Open the replacement toner carton.
• Remove the replacement toner cartridge.
• Remove the replacement toner waste bottle.
• Save all the replacement toner packaging for recycling the
2. Open the toner supply access cover.
3. Slide the gold cartridge dispenser patch cover to the left to
4. Pull the plunger to the right and lift the front end of the toner
5. Release the yellow plunger and rest the c
6. Carefully lift the used toner cartridge out of the printer.
A Toner Bottle In LFP Printer
To replace the toner cartridge: Check for packing materials and paper instruction
CAUTION: Toner identified for use in the XEROX 510 Wide Format
1. Open the replacement toner carton.
• Remove the replacement toner cartridge.
• Remove the replacement toner waste bottle.
• Save all the replacement toner packaging for recycling the used toner cartridge and toner waste bottle.
Open the toner supply access cover.
3. Slide the gold cartridge dispenser patch cover to the left to expose the dispenser patch.
4. Pull the plunger to the right and lift the front end of the toner cartridge.
5. Release the yellow plunger and rest the cartridge on the plunger mechanism.
6. Carefully lift the used toner cartridge out of the printer.
LFP Printer-Xerox
Check for packing materials and paper instruction
Wide Format
used toner cartridge and toner waste bottle.
expose the dispenser patch.

2. • Try not to tilt the cartridge too much to avoid toner
7. Wipe any excess toner off the used toner cartridge.
8. Seal the used toner cartridge dispenser patch with tape.
9. Place the used toner cartridge in the empty replacement toner
• Do not seal the carton until you have added the toner
and waste bottle according to the instructions provided with the
10. Hold the new toner cartridge horizontally and shake it side to
11. Install the new toner cartridge so that the end containing the
• Ensure that the cover tape is facing up.
12. Lower the toner cartridge into position while pushing the
13. Release the plunger.
14. Rotate the toner cartridge back and forth until the cartridge
CAUTION: Remove the cover tape carefully. Do not remove the
15. Remove the cover tape from the toner cartridge.
• Do not remove the seal under the tape.
16. Slide the gold cartridge dispenser patch cover to the right to
• Ensure that the cartridge patch is completely covered.
17. Close the toner supply access cover.
Brand names and trademarks are the
Copyright
• Try not to tilt the cartridge too much to avoid toner spillage.
7. Wipe any excess toner off the used toner cartridge.
dispenser patch with tape.
9. Place the used toner cartridge in the empty replacement toner carton.
• Do not seal the carton until you have added the toner waste bottle to it as well. Recycle the used cartridge
instructions provided with the replacement carton.
10. Hold the new toner cartridge horizontally and shake it side to side 10 or 12 times.
11. Install the new toner cartridge so that the end containing the cover tape is toward the front of the printer.
Ensure that the cover tape is facing up.
12. Lower the toner cartridge into position while pushing the plunger to the left.
14. Rotate the toner cartridge back and forth until the cartridge locks into position.
the cover tape carefully. Do not remove the clear, perforated seal.
15. Remove the cover tape from the toner cartridge.
• Do not remove the seal under the tape.
16. Slide the gold cartridge dispenser patch cover to the right to conceal the cartridge pat
• Ensure that the cartridge patch is completely covered.
the toner supply access cover.
the property of their respective holders and are for descriptive
Copyright 1993 - 2016 euccoi . All Rights Reserved.
www.euccoi.com
waste bottle to it as well. Recycle the used cartridge
replacement carton.
side 10 or 12 times.
cover tape is toward the front of the printer.
locks into position.
clear, perforated seal.
conceal the cartridge patch.
descriptive purpose only.