1. MICROWAVE
RADIO
TL
TRUNK LINK IP/SDH Series IP/SDH high capacity microwave radio
system designed for trunk, spur, access,
nodal and mobile backhaul
transmission applications.
TL Series is used in various types of
IP/SDH networks such as ring, media
diversity or linear configurations, and
various transmission path conditions
such as over water, over mountains,
inter or intra city routes.
Typical applications are 2G/3G/LTE
Cellular Network infrastructure, backup
transmission medium to fibre optic
links, high capacity IP Radio Rings.
TL Series is available in all frequency
bands from 4 to 13 Ghz with up to 16
STM1 or 2 Gbits capacity, in N+1 or
N+0 & M+1 or M+0 configurations.
In addition, for IP applications an L2
switch is embedded in the equipment.

2. TL
Trunk Link IP/SDH Series Trunk Link IP/SDH Series
Trunkn Link IP/SDH Series Trunk Link IP/SD
Trunk Link IP/S
Trunk Link IP/SDH Series
Trunk Link IP/
MICROWAVE Trunk Link IP/SDH Se
Trunk Link
RADIO TRUNK LINK IP/SDH Series
MAIN FEATURES Frequncy Range Full coverage of ITU/R chennels from 4 to 13 GHz
Supported Configurations N+1 or N+0 & M+1 or M+0 combined ACCP/ACAP/CCDP with/without SD/TSD
> N+1 or N+0 mixed configuration (single/dual RF band, Point-to-Point and Dual/Double Terminal)
ACCP/ACAP/CCDP with SD (space diversity) 1+1 Hot Stand By (two systems per rack, Point to Point Terminal)
& TSD (transmit space diversity with up to All configurations can be provided with or w/o XPIC
16 channels) support in a single rack Modulation Schemes SDH 64 QAM for 4, 6U, 11 GHz (40 MHz channels)
128 QAM for 4U, 6L, 7L, 7U, 8L, 13 GHz
> 2.048 Mbit/s wayside traffic,
IP 4, 16, 32, 64, 128, 256 QAM
10/100BASE-TX Fast Ethernet (FE) and 64
kbps digital service channels Supported Capacities SDH Up to 16 STM1
IP Up to 2,4 Gbps
> A full set of countermeasures against
fading in order to maximize system Output Power
at TRMD unit output (dBm) 4-8 GHz 11 GHz 13 GHz
performances
(Standard / High Power)
>Fixed or Adaptive Code Modulation 4 QAM +33/+30 +30 +27
Technique 4/16/32/64/128/256QAM 16 QAM +33/+30 +30 +27
32 QAM +33/+30 +30 +27
> STM-1 and Gigabit Ethernet (GE) electrical 64 QAM +33/+30 +30 +27
or optical interfaces are available with any 128 QAM +32/+29 +30 +27
mixed combination 256 QAM +30/+27 +30 +25
TLE.005.11 • Data subject to change without notice • All rights reserved © SIAE MICROELETTRONICA S.p.A.
>Easy on-site test and management without RF Tuning range 1 2 2
(No. of TMRD to cover a complete half band)
measuring instruments:
- automatic IF-IF response adjustment Receiver Sensitivity at BER 10-6
TRMD unit imput: IP SDH
- automatic SD DADE adjustment Rx Power (dBm) (typ)
- automatic baseband DADE adjusment 4 QAM -86 -
16 QAM -82.5 -
32 QAM -79 -
64 QAM -75.5 -75.5
L2 SWITCH FUNCTIONALITIES 128 QAM -72 -72
256 QAM -68 -
> Native IP radio
> VLAN Management Frequency Stability ±10 ppm
> Spanning tree (STP/RSTP/MSTP) ATPC 20 dB range
> Ethernet QoS (IEEE 802.1p / ToS / DSCP) Tributary interfaces Electrical/Optical STM-1 (S.11, L1.1)
Electrical/Optical Gbit Ethernet
> Flow control (IEEE 802.3x) Optical STM4 S.4.1. L.4.1
> Link aggregation (L1) Service Channels 2x2 Mbits wayside channel STM1
1X64 Kbits G.703 per STM1
> Compression & Accelerator Express and Omnibus Order WIre
> Traffic Shaping Additional features (optional) XPIC for frequency reuse
> Pay load compression STM1 Occasional channel
TSD Transmit Space Diversity
Dual RF
Double Terminal
TRMD Extended housekeeping imput and output
MAIN SIGNAL TRANSMISSION UNIT Mechanical Dimensions Housed in an ETSI rack (1800x600x345 mm)
Housed in an ETSI rack (2200x600x345 mm) for 1+1 redundant BB
The high integration level enables SIAE
MICROELETTRONICA to package in a Power Supply -48 Vdc (-40.5 to -57 V) in acccordance with EN 300 132-2
single board (TRMD) the Transmitter (TX), Power consumption (per terminal) 1+1 conf. 200 W
3+1 conf. 400 W
Receiver (RX), Mo-demodulator and base 7+1 conf. 800 W
band functions. Environmental Performances In accordance with EN300 019
Minimization of frequency dependent
spare parts has been achieved through
the use of wide-band units.
Easy operation and maintenance: no SIAE MICROELETTRONICA S.p.A.
Via Michelangelo Buonarroti 21, 20093 Cologno Monzese (MI) - Italy
adjustment or provisional settings are
Phone +39 02273251 Fax +39 02 25391585
required. www.siaemic.com