7. Coriant 8600 Differentiators
7
86028602
Industry smallest 6*1G port
device (1/3 of size, 1/6 of weight)
Industry smallest 6*1G port
device (1/3 of size, 1/6 of weight)
Passive coolingPassive cooling
50-70% less power consumption50-70% less power consumption
Industry only IP67 environmental
hardening
Industry only IP67 environmental
hardening
86158615
Ideal 1G and 10G interface mix
for access aggregation
Ideal 1G and 10G interface mix
for access aggregation
88Gbps capacity88Gbps capacity
Unique redundancy option via 2
unit stacking
Unique redundancy option via 2
unit stacking
Compact 1RU form factor per
unit
Compact 1RU form factor per
unit
86658665
Ideal interface mix with 1/10G
and 100G ports for metro edge
Ideal interface mix with 1/10G
and 100G ports for metro edge
1.2Tbps in initial release, scales
up to 3Tbps
1.2Tbps in initial release, scales
up to 3Tbps
30-70% better power per bit30-70% better power per bit
40-60% lower cost per bit40-60% lower cost per bit
Network Management: 80% provisioning time savings with INM8000 plug & play functionality and wizards, SDN enabledNetwork Management: 80% provisioning time savings with INM8000 plug & play functionality and wizards, SDN enabled
Sync: 50-70% more cost efficient, 3 times better phase accuracy than required by LTE-ASync: 50-70% more cost efficient, 3 times better phase accuracy than required by LTE-A
9. Coriant 8615 – Stacked Configuration
9
Operated as a single 8600 NE
• One node ID
• 2 virtual controller cards
• 2 virtual line cards
Double forwarding performance
• Look-ups only in ingress 8615
• 88 Gbps (Simple Imix)
• 4*10Gbps + 48*1Gbps
Stacking cable = ”backplane”
• 44 Gbps bidir data bus
• Control bus
• Synchronization (freq & phase)
• Default 50 cm cable
• 2 m cable for flexible installations
More than just two separate routers connected
16. 8602-AS and 8602-DS, introduced in SR7.1
- New 8602-xS variants
- “S” – stands for small or short
- Same port configuration and functionalities as previous 8602 versions
- Small LTE sites and small cell sites
- Benefits
- Complements current 8602 portfolio
- Improved usability: Easier to plug in the cables in rack installation
- Reducing the physical length by 18%
- Note:
- 8602-xS requires new rack adapter (81.86K-8602SADP-R6)
- 8602 DC power cables (STD 81.86W-P752J3-R6 & GB 81.86W-P752J4GB-R6)
- Wall mount adapter and sun cover fits to only standard 8602 not 8602-xS
27,4cm
6,1cm
A-port configuration 2xSFP + 4*RJ45
8602-A DC Indoor/outdoor
8602-A AC Indoor/outdoor
8602-AS DC Indoor
D-port configuration 6xSFP
8602-D DC Indoor/outdoor
8602-D AC Indoor/outdoor
8602-DS DC Indoor