1. The first thing that I did was made the head, for the head I just used a box
with a lot of segments in them and moved them around so that I clould
get it to the right shape.

2. After I made the head I made the eyes, the eyes I wanted them to look like LED
blubs sticking out. After I had the eyes done I began to do the neck, for the
neck I made it so it moved using pistons and so it had a full degree of rotation.

3. After I had the head done I started on the body, the body was pretty basic but
was a good base to build on, after I had the body done I started on the arm,
the arm was quite difficult to make it how I wanted it to look, I made the
shoulders socket look like it had plates so it could move all the way around it.

4. The hands I made pretty basic, they are goood enough so that they can do a lot
of stuff such as pick things up and so on.

5. After the arms where done I started to build on the body, the first thing I did
was make the flux capacitor, it was pretty difficult to make because of all the
bends in the pipes but I only needed one of them to make it.

6. After I almost had everything done I started top work on the hover ball which is
how it moves around, original I wanted to make it go from a square in to a
circle at the end but was unable to do that, so what I ended up doing was make
the hover ball and connect it to the square.

7. I then began to decorate the sidekick so that it would look a bit better. The first
bit of decoration was a bit on top of it, it was pretty easy to make and didn't
take long but came out very good.

8. After having a look around I thought the back of it look very blank so I decide
to put a tank on the back of it help in with straps, I thing that the tank came
out very well and makes a very good bit of decoration for the back.

9. After completing the model I then went through and added surfaces to each
bit I wanted textures on them.