We have the complete setup required for the production of LED lights including SMT line, WSM motorist installation and complete production of the product with prototyping with R&D lab.

1. Advantages of Delion And Claire LED Lights
Delion & Claire is an OEM manufacturer and exporter with a wide range of indoor and
outdoor LED lights. We have the complete setup required for the production of LED lights
including SMT line, WSM motorist installation and complete production of the product with
prototyping with R&D lab.
We constantly increase our presence by adding new countries to our portfolio each time.
We are currently supplying our products to all the colorful countries on the mainland. We
have good customer base in Nepal, Sri Lanka, Bhutan, Bangladesh, Iran, Ghana,
Mozambique, Kenya, Tanzania, Uganda, Botswana, Congo, Nigeria, Somalia, Sudan, Togo,
Liberia, Indonesia, Vietnam, Kuwait. , Saudi Arabia, Dubai, Oman, Bahrain, Qatar, Israel,
Maldives, Philippines, Malaysia, Thailand, Mauritius and North America.
Advantages of Dalian and Clare LED lights
1) Energy efficiency:-
LED lights use about 50 percent less electricity than traditional incandescent, fluorescent
and halogen alternatives, which showcase significant energy cost savings, especially for
spaces with extended lighting for extended ages. LEDs also aim light in a specific direction,
unlike conventional bulbs, which emit light - and heat - in all directions (because LEDs are
mounted on a flat face, they emit light into a hemisphere instead of a sphere). This
directional lighting capability reduces wasted light and energy.
2) Extended life:-
Unlike fire-lit lighting, LEDs don't "burn out" or fail, they just shroud over time. The life
expectancy of quality LEDs is - hours or really longer, depending on the quality of the beacon
or organization. A bulb lit by a normal fire lasts only about an hour; The same compact

2. fluorescent lasts for hours. With a longer working life, LEDs can reduce the labor costs of
replacing bulbs in marketable conditions, achieving a low protection lighting system.
3) Credibility:-
LEDs are a truly durable and reliable form of lighting - they can operate safely in cold
temperatures, and eliminate more impact and vibration than other light bulbs because they
have no fiber or other fragile corridors. This stability makes them ideal for use in areas that
will be subject to temperature oscillations, torrential rain and squeezing, such as in outdoor
or roof addicted bodies.
4) Controllability:-
Marketable fluorescent lighting systems may take longer than many bones to dematerialize,
but LEDs, as a semiconductor bias, are innately compatible with controls. Some LEDs can
actually be beamed up to a 10 percent light correlation while highly fluorescent lights reach
only 30 percent full brightness. LEDs also offer nonstop, step-position, as opposed to
dimming.
5) High brightness and intensity:-
LEDs are capable of emitting extremely high brightness. That's why wattage is no longer a
possible measure of brilliance - instead, look at the bulb's lumen affair when you're
switching to LEDs or other energy-efficient lighting.
6) Low radiated heat:-
When a fire-lit bulb works by heating its hair to a light-producing temperature, the LED bulb
emits electromagnetic energy as light when it is galvanized. By converting energy into light
(instead of using heat to induce light), LEDs are ideal for operating at significantly lower
temperatures than other types of light bulbs.
The little heat that the LEDs induce is dissipated by a special heat Gomorrah, designed to
absorb any heat and dissipate it safely from the diode. While the actual body or base may
feel warm to the touch, the LEDs themselves do not emit infrared radiation in their rays, i.e.
there is no warmth. This makes them ideal for use in heat-sensitive areas, such as displaying
artwork as they will not fade maculage or coloring or damages other heat.