More Related Content
Similar to LED Downlight Catalog
Similar to LED Downlight Catalog (20)
LED Downlight Catalog
- 2. 2541 N. Keystone St. Burbank, CA 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
LM 120 Series
Product Information
LED Architectural Downlight
Light Emitting Design introduces the ultimate in
architectural lighting with the latest generation of LED
technology in the all-new 120 Series LED architectural
light module (LM120).
The 120 series architectural light surpasses all other
PAR38 LED light modules in the industry with its
advanced design and engineering. The LM120 light
module is designed for commercial and residential
lighting used for both indoor/outdoor applications. It fits
in most standard recessed IC or non IC housings for
retrofit or new construction.
By using proprietary technologies in the LM120, it is
able to obtain an unprecedented evenly uniform bright
light, while maximizing the life of the LED light module.
US PATENT #US2007/0062032A1; other US and
international patents pending.
5 YEAR
LIMITED
WARRANTY
Benefits of LED Lighting
• Ultra low energy consumption resulting in a more green
and sustainable environment
• Up to 80% savings compared to filament bulbs or 60%
compared to fluorescent tubes
• Eliminates the costly repairs and replacements of bulbs
or fluorescent tubes
• Minimal environmental hazard upon disposal
• Solid state electronics with no filaments or gas tubes
• No harmful Ultra-Violet rays
• Rugged-shatterproof & shock resistant
• No ballasts or cold start problems
• Increased safety with minimal risk of fire hazards
• Direct replacement of incandescent Edison base bulbs
and lamps
Surface Mount Cylinder
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 3. 2541 N. Keystone St. Burbank CA. 91504
Burbank, CA
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
LM 120 Series
LED Architectural Downlight
Surface Mount Cylinder Dimensions Lamp External Dimensions
121mm
ceiling mount bracket 4-3/4”
153mm
171mm 6”
6-3/4”
153mm
6” 157mm
6-3/16”
Light Module Models
• LM120ED-W E26/27 Standard Edison Socket / Dimmable / 3000K Warm White
• LM120ED-N E26/27 Standard Edison Socket / Dimmable / 4000K Neutral White
• LM120GD-W GU-24 Base Socket / Dimmable / 3000K Warm White
• LM120GD-N GU-24 Base Socket / Dimmable / 4000K Neutral White
NOTE: All models are available with input voltage of 110V or 220V.
Please select desired input voltage when ordering.
Accessories Trim Color
• NH120 - Recessed Housing for New Construction
• RH120 - Recessed Housing for Retrofit • White Trim
• SMH120G - Surface Mount Housing GU-24 Base Socket • Mocha Trim
Indoor / Outdoor • Black Trim
• Gold Trim
NOTE: Surface mount housing cylinders are
available in different colors.
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 4. 2541 N. Keystone St. Burbank CA. 91504
Burbank, CA
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
LM 120 Series
LED Architectural Downlight
Technical Drawing
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 5. 2541 N. Keystone St. Burbank CA. 91504
Burbank, CA
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
LM 120 Series
LED Architectural Downlight
Features and Specification E26/27 STANDARD SOCKET
• LM120 Light Module designed to last 50,000 hours with a
minimum of 70% Lumen Maintenance
• CRI 85 / warm white (3000K)
• CRI 80 / neutral white (4000K)
• High lumen output & high efficacy
• Power consumption ONLY 12.5 Watts
• Dimmable to 25% with selected dimmers
• Available in GU-24 Base for high efficacy line voltage
sockets
• Suitable for recessed IC and non IC housings
• Indoor/outdoor: Ideal for damp locations
Housing
• Proprietary Air-Flow Convection® System designed to
minimize heat and maximize LED life by reducing junction
temperature of the LED when used in environments
exceeding 50°C
• LM120 is manufactured using only the highest grade
alloys and proprietary die-casting technology in the
construction of the dome housing and heat sink to
maximize performance and minimize cooling cost
Electronics
• Worldwide patented MCPCB technology enables ultra low GU-24 STANDARD SOCKET
LED junction temperatures for maintenance free long life
• I ntegrated high efficiency LED driver and power supply:
Power Factor (PFC) >0.94, Efficiency 85%
• Smart circuitry with surge and transient voltage
protection
• Input voltage AC 110V/60Hz OR 220V/50Hz
• Precisely controlled constant current draw for stable
power source
• Powered by Japanese high brightness LED chip
Optics
• Proprietary reflector and optical diffuser system
enables 140° glare free comforting soft light without
the uncomfortable LED “eye piercing effect”
5 YEAR
LIMITED
WARRANTY
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 6. 2541 N. Keystone St. Burbank, CA 91504
2541 N. Keystone St. Burbank CA. 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
LM 150 Series
Product Information LED Architectural 6” Downlight
Light Emitting Design introduces the ultimate in
architectural lighting with the latest generation of LED
technology in the all-new 150 Series LED architectural
light module (LM150).
The 150 series architectural light surpasses all other
LED light modules in the industry with its advanced
design and engineering. The LM150 light module is
designed for commercial and residential lighting used
for both indoor/outdoor applications. It fits in most
standard recessed IC or non IC housings for retrofit or
new construction.
By using proprietary technologies in the LM150, it is
able to obtain an unprecedented evenly uniform bright
light while maximizing the life of the LED light module.
US PATENT #US2007/0062032A1; other US and
international patents pending.
5 YEAR
LIMITED
WARRANTY
Benefits of LED Lighting
• Ultra low energy consumption resulting in a more green
and sustainable environment
• Up to 80% savings compared to filament bulbs or 60%
compared to fluorescent tubes
• Eliminates the costly repairs and replacements of bulbs
or fluorescent tubes
• Minimal environmental hazard upon disposal
• Solid state electronics with no filaments or gas tubes
• No harmful Ultra-Violet rays
• Rugged-shatterproof & shock resistant
• No ballasts or cold start problems
• Increased safety with minimal risk of fire hazards
• Direct replacement of incandescent Edison base bulbs
and lamps
Surface Mount Cylinder
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 7. 2541 N. Keystone St. Burbank, CA 91504
2541 N. Keystone St. Burbank CA. 91504
tel: 11888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
LM 150 Series
LED Architectural 6” Downlight
Surface Mount Cylinder Dimensions Lamp External Dimensions
ceiling mount bracket
144mm
5-5/8”
178mm 153mm
7” 6”
174mm 188mm
6-7/8” 7-3/8”
Light Module Models
• LM150ED-W E26/27 Standard Edison Socket / Dimmable / 3000K Warm White
• LM150ED-N E26/27 Standard Edison Socket / Dimmable / 4000K Neutral White
• LM150GD-W GU-24 Base Socket / Dimmable / 3000K Warm White
• LM150GD-N GU-24 Base Socket / Dimmable / 4000K Neutral White
NOTE: All models are available with input voltage of 110V or 220V.
Please select desired input voltage when ordering.
Accessories Trim Color
• NH150 - Recessed Housing for New Construction
• RH150 - Recessed Housing for Retrofit • White Trim
• SMH150G - Surface Mount Housing GU-24 Base Socket • Mocha Trim
Indoor / Outdoor • Black Trim
• Gold Trim
NOTE: Surface mount housing cylinders are
available in different colors.
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 8. 2541 N. Keystone St. Burbank, CA.91504
2541 N. Keystone St. Burbank CA 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
LM 150 Series
LED Architectural 6” Downlight
Features and Specification E26/27 STANDARD SOCKET
E26/27 STANDARD SOCKET
• LM150 Light Module designed to last 50,000 hours with a
minimum of 70% Lumen Maintenance
• CRI 85 / warm white (3000K)
• CRI 80 / neutral white (4000K)
• High lumen output & high efficacy
• Power consumption ONLY 14.5 Watts
• Dimmable to 25% with selected dimmers
• Available in GU-24 Base for high efficacy line voltage
sockets
• Suitable for recessed IC and non IC housings
• Indoor/outdoor: Ideal for damp locations
Housing
• Proprietary Air-Flow Convection® System designed to
minimize heat and maximize LED life by reducing junction
temperature of the LED when used in environments
exceeding 50°C
• LM120 is manufactured using only the highest grade
alloys and proprietary die-casting technology in the
construction of the dome housing and heat sink to
maximize performance and minimize cooling cost
Electronics
GU-24 STANDARD SOCKET
GU-24 STANDARD SOCKET
• Worldwide patented MCPCB technology enables ultra low
LED junction temperatures for maintenance free long life
• Integrated high efficiency LED driver and power supply:
Power Factor (PFC) >0.94, Efficiency 85%
• Smart circuitry with surge and transient voltage
protection
• Input Voltage AC 110V/60Hz OR 220V/50Hz
• Precisely controlled constant current draw for stable
power source
• Powered by Japanese high brightness LED chip
Optics
• Proprietary reflector and optical diffuser system
enables 140° glare free comforting soft light without
the uncomfortable LED “eye piercing effect”
5 YEAR
LIMITED
WARRANTY
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 9. 2541 N. Keystone St. Burbank CA. 91504
2541 N. Keystone St. Burbank, CA 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
LM 200 Series
Product Information LED Architectural 7-1/2” Downlight
Light Emitting Design introduces the ultimate in
architectural lighting with the latest generation of LED
technology in the all-new 200 Series LED architectural
light module (LM200).
The 200 series architectural light surpasses all other
LED light modules in the industry with its advanced
design and engineering. The LM200 light module is
designed for commercial and residential lighting used
for both indoor/outdoor applications. It fits in most
standard recessed IC or non IC housings for retrofit or
new construction.
By using proprietary technologies in the LM200, it is
able to obtain an unprecedented evenly uniform bright
light while maximizing the life of the LED light module.
US PATENT #US2007/0062032A1; other US and
international patents pending.
5 YEAR
LIMITED
WARRANTY
Benefits of LED Lighting
• Ultra low energy consumption resulting in a more green
and sustainable environment
• Up to 80% savings compared to filament bulbs or 60%
compared to fluorescent tubes
• Eliminates the costly repairs and replacements of bulbs
or fluorescent tubes
• Minimal environmental hazard upon disposal
• Solid state electronics with no filaments or gas tubes
• No harmful Ultra-Violet rays
• Rugged-shatterproof & shock resistant
• No ballasts or cold start problems
• Increased safety with minimal risk of fire hazards
• Direct replacement of incandescent Edison base bulbs
Surface Mount Cylinder and lamps
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 10. 2541 N. Keystone St. Burbank, CA. 91504
2541 N. Keystone St. Burbank CA 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
LM 200 Series
LED Architectural 7-1/2” Downlight
Surface Mount Cylinder Dimensions Lamp External Dimensions
ceiling mount bracket 177mm
7”
178mm 153mm
7” 6”
220mm
207mm 8-5/8”
8-3/16”
Light Module Models
• LM200E-W E26/27 Standard Edison Socket / 3000K Warm White
• LM200E-N E26/27 Standard Edison Socket / 4000K Neutral White
• LM200G-W GU-24 Base Socket / 3000K Warm White
• LM200G-N GU-24 Base Socket / 4000K Neutral White
NOTE: All models are available with input voltage of 110V or 220V.
Please select desired input voltage when ordering.
Accessories Trim Color
• NH200 - Recessed Housing for New Construction
• RH200 - Recessed Housing for Retrofit • White Trim
• SMH200G - Surface Mount Housing GU-24 Base Socket • Mocha Trim
Indoor / Outdoor • Black Trim
• Gold Trim
NOTE: Surface mount housing cylinders are
available in different colors.
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 11. 2541 N. Keystone St. Burbank CA. 91504
2541 N. Keystone St. Burbank, CA 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
LM 200 Series
LED Architectural 7-1/2” Downlight
Features and Specification E26/27 STANDARD SOCKET
E26/27 STANDARD SOCKET
• LM200 Light Module designed to last 50,000 hours with a
minimum of 70% Lumen Maintenance
• CRI 85 / warm white (3000K)
• CRI 80 / neutral white (4000K)
• High lumen output & high efficacy
• Power consumption ONLY 17.5 Watts
• Available in GU-24 Base for high efficacy line voltage
sockets
• Suitable for recessed IC and non IC housings
• Indoor/outdoor: Ideal for damp locations
Housing
• Proprietary Air-Flow Convection® System designed to
minimize heat and maximize LED life by reducing junction
temperature of the LED when used in environments
exceeding 50°C
• LM120 is manufactured using only the highest grade
alloys and proprietary die-casting technology in the
construction of the dome housing and heat sink to
maximize performance and minimize cooling cost
Electronics
• Worldwide patented MCPCB technology enables ultra low
LED junction temperatures for maintenance free long life GU-24 STANDARD SOCKET
GU-24 STANDARD SOCKET
• Integrated high efficiency LED driver and power supply:
Power Factor (PFC) >0.94, Efficiency 85%
• Smart circuitry with surge and transient voltage
protection
• Input voltage AC 110V/60Hz OR 220V/50Hz
• Precisely controlled constant current draw for stable
power source
• Powered by Japanese high brightness LED chip
Optics
• Proprietary reflector and optical diffuser system
enables 140° glare free comforting soft light without
the uncomfortable LED “eye piercing effect”
5 YEAR
LIMITED
WARRANTY
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 12. 2541 N. Keystone St. Burbank CA. 91504
2541 N. Keystone St. Burbank, CA 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
P5500 Series PAR38
Product Information
P5500 is a high output PAR 38 LED lamp with
LED Architectural Light
advanced integrated thermal technology. It comes
with a standard Edison base socket and can be used
in commercial or residential lighting for interior
applications. It has a unique patented optical system
that delivers maximum light output with an evenly
uniform light dispersion pattern, ensuring reliable
operation for commercial and hospital applications. It
is available in warm (3000K) and neutral white (4000K)
color temperatures.
By using proprietary technologies in the P5500, it is
able to obtain an unprecedented evenly uniform bright
light while maximizing the life of the LED light module.
US Patent # US2007/0062032A1; other US and
International patents pending.
5 YEAR
LIMITED
WARRANTY
Benefits of LED Lighting
• Ultra low energy consumption resulting in a more green
and sustainable environment
• Up to 80% savings compared to filament bulbs or 60%
compared to fluorescent tubes
• Eliminates the costly repairs and replacements of bulbs
or fluorescent tubes
• Minimal environmental hazard upon disposal
• Solid state electronics with no filaments or gas tubes
• No harmful Ultra-Violet rays
• Rugged-shatterproof & shock resistant
• No ballasts or cold start problems
• Increased safety with minimal risk of fire hazards
• Direct replacement of incandescent Edison base bulbs
and lamps
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 13. 2541 N. Keystone St. Burbank CA. 91504
2541 N. Keystone St. Burbank, CA 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
P5500 Series PAR38
LED Architectural Light
Lamp External Dimensions
Light Module Models
• P5500D-W E26/27 Standard Edison Socket / Dimmable / 3000K Warm White
• P5500D-N E26/27 Standard Edison Socket / Dimmable / 4000K Neutral White
NOTE: All models are available with input voltage of 110V or 220V.
Please select desired input voltage when ordering.
Accessories Trim Color
• NH5500 - Recessed Housing for New Construction
• RH5500 - Recessed Housing for Retrofit • White Trim
• SMH5500G - Surface Mount Housing GU-24 Base Socket • Mocha Trim
Indoor / Outdoor • Black Trim
• Gold Trim
NOTE: Surface mount housing cylinders are
available in different colors.
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 14. 2541 N. Keystone St. Burbank CA. 91504
Burbank, CA
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
P5500 Series PAR38
LED Architectural Light
Technical Drawing
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 15. 2541 N. Keystone St. Burbank CA. 91504
2541 N. Keystone St. Burbank, CA 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
P5500 Series PAR38
LED Architectural Light
Features and Specification E26/27 STANDARD SOCKET
E26/27 STANDARD SOCKET
• P5500 Light Module designed to last 50,000 hours with a
minimum of 70% Lumen Maintenance
• CRI 85 / warm white (3000K)
• CRI 80 / neutral white (4000K)
• High lumen output & high efficacy
• Power consumption ONLY 12.5 Watts
• Dimmable to 25% with selected dimmers
• Suitable for IC and non IC housing for indoor commercial
and residential applications
Housing
• Proprietary Air-Flow Convection® System designed to
minimize heat and maximize LED life by reducing junction
temperature of the LED when used in environments
exceeding 50°C
• P5500 is manufactured using only the highest grade
alloys and proprietary die-casting technology in the
construction of the dome housing and heat sink to
maximize performance and minimize cooling cost
Electronics
• Worldwide patented MCPCB technology enables ultra low
LED junction temperatures for maintenance free long life
• I ntegrated high efficiency LED driver and power supply:
Power Factor (PFC) >0.94, Efficiency 85%
• Smart Circuitry with Surge and Transient Voltage
Protection
• Input voltage AC 110V/60Hz OR 220V/50Hz
• Precisely controlled constant current draw for stable
power source
• Powered by Lumileds High Brightness LED
Optics
• Proprietary high efficacy optical design using Total
Internal Reflection (TIR) to deliver light where you need
it most.
5 YEAR
LIMITED
WARRANTY
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 16. 2541 N. Keystone St. Burbank CA. 91504
2541 N. Keystone St. Burbank, CA 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
CLM 422
Product Information
LED Ceiling Luminaire Module
Light Emitting Design LED Ceiling Luminaire Module is
the first truly engineered commercial grade LED office
light designed to replace fluorescent fixtures of much
higher wattage classes. The CLM 422 delivers evenly
distributed horizontal and vertical foot-candles, ideally
suited for typical work spaces and utility areas. The
four individual light modules and driver make the CLM
422 the most cost effective, commercially viable
solution available on the market today. The patented
Air Bi-Pass Convection System enables excellent
thermal management to ensure long LED life with
extended lumen maintenance and virtually zero fixture
maintenance. Unlike other lighting modules, the CLM
422 weighs only 3.0KG (6.5LB) and does not require
complicated and costly reinforcement of the ceiling.
US PATENT #US2007/0062032A1; other US and
international patents pending.
5 YEAR
LIMITED
WARRANTY
Benefits of LED Lighting
Benefits of LED Lighting
• Ultra low energy consumption resulting in a more green
and sustainable environment
• Up to 80% savings compared to filament bulbs or 60%
compared to fluorescent tubes
• Eliminates the costly repairs and replacements of bulbs
or fluorescent tubes
• Minimal environmental hazard upon disposal
• Solid state electronics with no filaments or gas tubes
• No harmful Ultra-Violet rays
• Rugged-shatterproof & shock resistant
• No ballasts or cold start problems
• Increased safety with minimal risk of fire hazards
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 17. 2541 N. Keystone St. Burbank, CA 91504
2541 N. Keystone St. Burbank CA. 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
CLM 422
LED Ceiling Luminaire Module
Technical Drawing
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 18. 2541 N. Keystone St. Burbank, CA. 91504
2541 N. Keystone St. Burbank CA 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
CLM 422
LED Ceiling Luminaire Module
Features and Specification External Dimensions
• CLM422 Ceiling Luminaire Module is designed to last
50,000 hours with a minimum of 70% Lumen Maintenance
• CRI 85 / neutral white (4000K)
• CRI 82 / cool white (5000K)
• High lumen output & high efficacy
• Power consumption ONLY 45 Watts
• Indoor / non-insulated ceilings only
Light Module
• Patented Passive Air-Flow Convection® System
designed to minimize heat and maximize LED life by
reducing junction temperature of the LED
• CLM422 is manufactured using only the highest grade
extruded alloys in the construction of each individual
module to maximize performance
Electronics
• Worldwide Patented MCPCB Technology enables ultra low
LED Junction temperatures for maintenance free long life
• I ntegrated high efficiency LED driver and power supply:
Power Factor (PFC) >0.95, Efficiency 88%
• Smart circuitry with surge and transient Voltage
Protection
• Input voltage 100-240VAC 50/60Hz
• Precisely controlled constant current draw for stable
power source
• Powered by Japanese high brightness LED chip
Optics
• Proprietary reflector and optical diffuser system
enables 150° glare free comforting soft light without
the uncomfortable LED “eye piercing effect”
Light Module Models
• CLM422-N - 110/ 220VAC (4000K Neutral White)
• CLM422-C - 110/220VAC (5000K Cool White)
NOTE: Housing frame available in different colors.
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 19. 2541 N. Keystone St. Burbank, CA 91504
2541 N. Keystone St. Burbank CA. 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
SML Series
LED Surface Mount Luminaire
Product Information
Derived from its predecessor (CLM 422), the SML Surface
Mount Luminaire delivers high output light with the
versatility of surface mounting anywhere. Designed to
replace fluorescent fixtures of much higher wattage in your
garage or office, the SML is ideal for everyday lighting.
The SML delivers evenly distributed horizontal and vertical
foot-candles, ideally suited for typical work spaces and
utility areas. The patented Air Bi-Pass Convention System
enables excellent thermal management to ensure long
LED life with extended lumen maintenance and virtually
zero fixture maintenance. Unlike other lighting modules,
Features and Specification the SML weighs only 1.0 / 0.5KG (2.21 / 1.0 LB), and does
not require complicated and costly mounting to the ceiling.
• SML500 / 1000 Light Module designed to last 50,000 US PATENT #US2007/0062032A1; other US and
hours with a minimum of 70% Lumen Maintenance international patents pending.
• CRI 85 / neutral white (4000K)
• CRI 82 / cool white (5000K)
• High lumen output & high efficacy
• Power consumption ONLY 12 / 24 Watts 5 YEAR
• I ndoor / outdoor IP66 LIMITED
WARRANTY
Light Module
• Patented Passive Air-Flow Convection® System
designed to minimize heat and maximize LED life by Applications
reducing junction temperature of the LED
• SML is manufactured using only the highest grade
extruded alloys in the construction of each individual
model to maximize performance
Electronics
• Worldwide patented MCPCB technology enables heat to
flow directly from the LED to the heat sink, allowing the
LED to operate at cooler temperatures
• I ntegrated high efficiency LED driver and power supply:
Power Factor (PFC) >0.92, Efficiency 85%
• Smart circuitry with surge and transient voltage
protection
• Input voltage 100-240VAC 50/60Hz.
• Precisely controlled constant current draw for stable
power source
• Powered by high brightness LED
Optics
• Proprietary reflector and optical diffuser system
enables 240° glare free comforting soft light without
the uncomfortable LED “eye piercing effect”
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 20. 2541 N. Keystone St. Burbank CA. 91504
Burbank, CA
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
SML Series
LED Surface Mount Luminaire
Technical Drawing
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 21. 2541 N. Keystone St. Burbank, CA 91504
2541 N. Keystone St. Burbank CA. 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
SML Series
LED Surface Mount Luminaire
External Dimensions
Light Module Models
• SML500N - 110/220VAC (4000K Neutral White)
• SML500C - 110/220VAC (5000K Cool White)
• SML1000N - 110/220VAC (4000K Neutral White)
• SML1000C - 110/220VAC (5000K Cool White)
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 22. 2541 N. Keystone St. Burbank, CA 91504
2541 N. Keystone St. Burbank CA. 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
IL 450
Product Information
LED Industrial Light
IL 450 is the first truly engineered commercial grade LED
industrial light designed to replace existing high-pressure
mercury, high pressure sodium, and metal halide lamp fixtures
of much higher wattage classes. The IL 450 delivers an
enormous amount of light to where you need it most. No Light
Pollution- Light distribution designed for the industrial
working area application. Air Bi-Pass Convection System
enables excellent thermal management to ensure long LED
life with extended lumen maintenance and virtually zero
fixture maintenance. Snap & Turn spring loaded mounting
system eliminates complicated installation or mounting.
Designed specifically for industrial applications (i.e.
warehouses, factories, gas station), the integrated LED
system and driver make the IL450 the most cost effective,
commercially viable solution available on the market today.
US PATENT #US2007/0062032A1; other US and
international patents pending.
5 YEAR
LIMITED
WARRANTY
Benefits of LED Lighting
Benefits of LED Lighting
• Ultra low energy consumption resulting in a more green
and sustainable environment
• Up to 40 - 60% savings compared to mercury / sodium
& metal halide lamps of higher wattage
• Eliminates the costly repairs and replacements of
bulbs or fluorescent tubes
• Minimal environmental hazard upon disposal
• Solid state electronics with no filaments or gas tubes
• No harmful Ultra-Violet rays
• Rugged-shatterproof & shock resistant
• No ballasts or cold start problems
• Increased safety with minimal risk of fire hazards
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 23. 2541 N. Keystone St. Burbank, CA 91504
2541 N. Keystone St. Burbank CA. 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
IL 450
LED Industrial Light
Technical Drawing
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 24. 2541 N. Keystone St. Burbank, CA 91504
2541 N. Keystone St. Burbank CA. 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
IL 450
LED Industrial Light
Features and Specification External Dimensions
• IL 450 Light Module designed to last 50,000 hours with
a minimum of 70% Lumen Maintenance
• CRI 75-80
• High lumen output & high efficacy
• Available in neutral (4000K) / cool (5000K)white
• Indoor / outdoor IP68 (Waterproof)
Housing
• Patented Isolated Membrane Heat Sink ®System with
360° High-Flow Convection designed to spread the heat
away from the Hot Zone thereby minimizing the Junction
Temperature when used in environments exceeding
50°C (122°F)
• L ow-profile, design enables it to be used in various
spaces and applications
• Patented Quick Mount Snap and Turn mounting
system provides for safe and easy installation to any
surface or structure
• Powder coated with industrial grade Dura-Guard double
layer epoxy for year round indoor/outdoor applications
with industry leading 10 years protection on weather
and corrosion
Electronics
• Worldwide Patented MCPCB Technology enables ultra
low LED Junction temperatures for maintenance free
long life
• Integrated high efficiency LED driver and power supply:
Power Factor (PFC) >0.94, Efficiency 93%
• Smart circuitry with surge and transient voltage
protection
• Input Voltage 90-277VAC 50/60 Hz
• Powered by Lumileds high brightness LED
Optics
• Full Cut-Off proprietary reflector and optical system
providing powerful glare free uniform lighting, eliminating
the uncomfortable LED “eye-piercing effect”
Light Module Models
• IL45050 - 110 - 277VAC / 50W
• IL45075 - 110 - 277VAC / 75W
• IL45100 - 110 - 277VAC / 100W
• IL45150 - 110 - 277VAC / 150W
• IL45185 - 110 - 277VAC / 185W
NOTE: Housing available in different colors.
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 25. 2541 N. Keystone St. Burbank, CA 91504
2541 N. Keystone St. Burbank CA. 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
IL 450
LED Industrial Light
Mounting Option Accessories
SST-IL45-B Spring Loaded Snap & Turn Surface Mount
W90-IL45-60B Wall Mount Elbow Bracket
SST-IL45-H60B Spring Loaded Snap & Turn Hanging System
CH4-IL45-50B Chain Chandelier Hanging System
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 26. 2541 N. Keystone St. Burbank, CA 91504
2541 N. Keystone St. Burbank CA. 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
RWL II
Product Information
LED ROADWAY LIGHTING
The RWLII Type II (6-9m pole pitch of 15-30m) LED
Streetlight is the industry's first two piece design. This
allows for a more uni-body housing and 360° of air
convection around the “Hot Zone” which maximizes the
surface area and increases thermal conductivity. Due to the
unique construction of the heat sink, we also are able to
obtain an unprecedented IP 68 rating (water submergible) for
all electronics contained within the LED light engine and
power supply. This is critical for harsh weather as hot and
cold temperature changes would cause parts rapidly degrade
and fail. The optical system in the RWLII gives ideal light
output for most standards with minimum light pollution, thus
eliminating the need for costly secondary optical systems.
Currently, the RWLII meets or exceeds the NHTSB (National
Highway Transportation Safety Board of USA) European CIE
and Australian standards as well as the American National
Standard Practice for Roadway Lighting.
US PATENT #US2007/0062032A1; other US and
international patents pending.
5 YEAR
LIMITED
WARRANTY
Benefits of LED Lighting
Benefits of LED Lighting
• Ultra low energy consumption resulting in a more green
and sustainable environment
• Up to 40 - 60% savings compared to mercury / sodium &
metal halide lamps of higher wattage
• Eliminates unnecessary service and repair costs
• Minimal environmental hazard upon disposal
• Increased road visibility and safety
• No harmful Ultra-Violet rays
• Rugged - waterproof unit
• No ballasts or cold start problems
• Increased safety with minimal risk of fire hazards
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 27. 2541 N. Keystone St. Burbank, CA 91504
2541 N. Keystone St. Burbank CA. 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
RWL II
LED ROADWAY LIGHTING
Technical Drawing
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.
- 28. 2541 N. Keystone St. Burbank, CA 91504
2541 N. Keystone St. Burbank CA. 91504
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
tel: 1 888 662-4466, e-mail: info@lightemittingdesigns.com
www.lightemittingdesigns.com
www.lightemittingdesigns.com
RWL II
LED ROADWAY LIGHTING
Features and Specification External Dimensions
Optics
• Full Cut-Off optical system with no glare or light pollution
• Available in Neutral White (4000K / 75 CRI) or Cool White
(5000K / 70 CRI)
• Ideal application for 6 to 9 meters pole height with a
pole pitch of 15 to 30 meters
• High lumen output & high efficacy
• Designed to last 50,000 hours with a minimum of 70%
Lumen Maintenance
• Meets and /or exceeds NHTSB (National Highway
Transportation Safety Board of USA), European CIE and
Australian standards
• Meets American National Standard Practice for Roadway
Lighting
Housing
• Patented Isolated Membrane Heat Sink ®System with
360° High-Flow Convection designed to spread the heat
away from the Hot Zone thereby minimizing the Junction
Temperature when used in environments exceeding 50°C
(122°F)
• Powder coated with industrial grade Dura-Guard double
layer epoxy for year round indoor/outdoor applications
with industry leading 10 years protection on weather and
corrosion
Electronics
• Worldwide Patented MCPCB Technology enables ultra low
LED Junction temperatures for maintenance free long life
• Integrated high efficiency LED driver and power supply
Power Factor (PFC) >0.94, Efficiency 93%
• Input voltage 90-277VAC 50/60 Hz
• Powered by High Brightness LED
Light Module Models
• RWL II 050 - 110 - 277VAC / 50W
• RW L II 075 - 110 - 277VAC / 75W
• RWL II 100 - 110 - 277Vac / 100W
• RWL II 150 - 110 - 277VAC / 150W
• RWL II 185 - 110 - 277VAC / 185W
NOTE: Housing available in different colors.
L.E.D. is a trademark of Light Emitting Design, Inc.
© 2007 Light Emitting Design, Inc.