Retrofitting from fluorescent to LEDs can mean business for your company. Learn the basics of Retrofitting from the experts at Principal LED.

1. Retrofitting 101

2. Does your customer’s sign lighting look poor while still racking up high
energy costs?
Do you want to replace the lighting, save the sign, not spend an arm and
leg, and lower energy usage and maintenance?
YOU NEED Principal
LED’s Retrofit Stiks
2
1

3. Our Mission
- To simplify the lives of our
customers
- Easy retrofitting (and new
construction!)
- Innovative products
- Helpful resources

4. LEDs = Savings (save energy – save on maintenance)
We’re here to help with layout
preparation
They’re easy to install
They’re economical!1
2
3
4
Why Principal LED Stiks?

5. For deeper cabinets, 120 degree lens
angle, greater than 12” depth to the
face
Tap Out
StikThe ‘GO TO’ product for standard
depths
Street
Stik
PowerStik
The Lineup
Qwik Stik

6. - The “LATEST AND
GREATEST”
- Great for 5 to 10 inches
deep
6’ Wire
Whips

7. Specs
Tap Out

8. See It In Action!

9. - Pres-assembled and ready to install
- Available in all lamp sizes from 18”-120”
- Exceeds the output of standard T-12 lamps to
the sign face
- Can be customized to any color or density
configuration
- 50-70% energy savings over T-12 lit signs
Flat Stik
Qwik Stik

10. Specs
Qwik Stik

11. See It In Action!

12. - The only Stik with a module that can
illuminate 1.5” deep from LEDs to face
- Optimized for shallow multi-stroke boxes
from 1.5”-4” deep
- Available in all traditional T-12 lamp lengths
from 8”-120”
Street Stik
Slim Stik

13. Specs
Street Stik

14. See It In Action!

15. - The world’s first true AC-LED T-12 replacement
- Patented Fusion Chip-On-Board (COB) technology
for maximum lumen maintenance
- Available in all standard lamp lengths (18”-120”) and
custom lengths available
- Batwing lens for water resistance and wide beam
spread

16. Specs
PowerStik

17. See It In Action!

18. Ok, so HOW?
Disconnect power from the mains
1
2
3
4
5
6
Cut power and secondary lines to the existing ballast and remove
Remove old fluorescent lamps from existing lamp sockets
Insert Stik into lamp socket
Connect wires to the 12V power unit using wire nuts
Connect hook-up wire to the secondary output of the 12VDC Power Supply

19. https://youtu.be/BZeFVBuhlLk
Watch
the Video
Anytime

20. Visit Our Website
and navigate by
solutions

21. We’re here to help.
- Contact our layouts department for
assistance
- E-mail layouts@p-led.com
- Call 325-227-4577
- FREE online layouts 24/7 www.p-
led.com/layouts
- Self Service – eZLayoutBuilder