A Solenoid valve works as an electromechanical gadget with a current which is going through the coil present in the valve. This current flow results in the expansion of a magnetic field utilized in controlling the flow of gas as well as liquid.
Here are a few points that you should be kept in mind while shortlisting a solenoid valve.
2. Presentation Overview
Topics to be Discussed
Introduction
The Type of Valve to Utilize
The Rate of Flow
The Pressure of Operating
Requirements of Power
Contact Us DASSSERVICES. INC
3. Introduction Solenoid valves basically works as an
electromechanical gadget with a current
which is going through the coil present in the
valve.
This current flow results in the development
of a magnetic field utilized in controlling the
flow of gas as well as liquid powered
apparatuses and frameworks.
There are a lot of things that should be kept
in mind while short listing a solenoid valve.
4. The Type of Valve to Utilize
Direct Acting Valve is the sort of valve that
depends on the level of the active current
present in the coil to work appropriately.
The valve opens and closes depending upon
the pressure and liquid flow or gas that is
provided to it and doesn't surpass the most
extreme pressure accessible.
Direct Acting Valve Pilot Operated Valve
Pilot Operated Valve that comes with the main
valve seats along with a pilot, the top part of
the valve is comprised of the pilot seat with an
orifice.
The pilot operated valve needs the full power
in order to both open and be kept open,
however, it requires less electrical capacity to
work.
Similarly, there is two-way, three-way
and a four-way valve, having two, three
and four ports respectively.
5. THE RATE OF FLOW
Before choosing a solenoid valve,
you need to decide the required
rate of flow for the application,
keeping in mind the end goal to
accurately pick a solenoid valve.
Ensure that how much flow is
required if the valve is too huge for
its utilization, as you will be wasting
money and air/liquid and in case
that it's too little the actuator won't
appropriately work.
6. The Pressure of Operating
Go through the operating pressure provided to you
by the valve's producer.
Since working weight pressure affects the flow rate
of the valve, deciding the pressure of operating can
enable you to pick a valve that will execute as
required relying upon application.
7. Requirements of Power
The amount of wattage or voltage required, realizing
that can enable you to pick the correct sort of
solenoid valve to use for the application.
Observe however that the flow is restricted by the
orifice of the valve; greater orifices have a tendency
to require more capacity to utilize.
For instance, if your utilization requires high flow
rates and low power supply, at that point you ought
to consider utilizing a pilot worked valve as it is best
utilized in those sorts of intensity necessities.
8. Going through all these points, you will be able to
shortlist a solenoid valve based on your desired technical
specification.
However, in case you still have some confusion then check out DAS
Services (www.dasservicesinc.com) as DAS Services, Inc. is a leading
provider of small factory automation and robotic components to many
of today's largest and most successful corporations.
10. About Us
DAS Services, Inc. is a leading provider of small factory automation and
robotic components to many of today's largest and most successful
corporations.
The owner, Lou Pavlovich, had some 30 plus years experience in the
Factory Automation field.
The original name Design Automated Systems was chosen to
illustrate the companies strengths- the selection and provision of the
proper pneumatic equipment and pneumatic components to meet the
automation needs of each individual customer.