Our target is, to become a global company that provides standard solutions to the problems in the industry, invest primarily on R&D and innovation, and create value for our customers and employees.

1. El Aletleri
HAND TOOLS

3. CRIMPING
TOOLS
3
CRIMPER 6 - 562113
Cable Cross-Section 0,25-6,0mm² (AWG 24-10)
Crimping Technique Linear
Terminal Insertion Frontal
Self-Adjustment Available
• Automatic adjustment over the complete cross-section
• Continuous precision crimp over the full length of the ferrule
• Full cycle ratchet operation (with release) assuring a complete crimp
• Perfect fit to hand ergonomics
• Patented crimping technology
Terminal / Connector Type
Crimping Profile

4. CRIMPING
TOOLS
4
CRIMPER F 10 R - 562125
Cable Cross-Section 0,08-10 mm² (28-8 AWG)
Crimping Technique Linear
Terminal Insertion Lateral
Self-Adjustment Available
• Crimping of wire end ferrules with or without insulation
• Special-designed ergonomic handles prevents slipping
• High-precision crimping with ultra comfortable force transmission
Terminal / Connector Type
Crimping Profile

5. CRIMPING
TOOLS
5
CRIMPER F 10 L - 562126
Cable Cross-Section 0,5-10 mm² (20-8 AWG)
Crimping Technique Linear
Terminal Insertion Frontal
• Automatic adjustment over the complete cross-section
• High precision crimping
• Releasable ratchet ensures the complete crimp process
• Special-designed ergonomic handles prevents slipping
Terminal / Connector Type
Crimping Profile

6. CRIMPING
TOOLS
6
CRIMPER N 16 H - 562124
Cable Cross-Section 0,08-16 mm²
Crimping Technique Linear
Terminal Insertion Lateral
• Automatic adjustment between 0,08 - 16 mm²
• Required hand force reduced by 30%
• Hexagonal crimping
• Releasable ratchet ensures the complete crimp process
• Special-designed ergonomic handles prevents slipping
Terminal / Connector Type
Crimping Profile

7. CRIMPING
TOOLS
7
CRIMPER N 16 L - 562117
Cable Cross-Section 0,14-16,0 mm²
(26-20;18-16; 14; 12; 10; 8; 6 AWG)
• Releasable ratchet ensures the complete crimp process
• Special-designed ergonomic handles prevents slipping
Terminal / Connector Type
Crimping Profile

8. CRIMPING
TOOLS
8
CRIMPER N 50 L - 562119
Cable Cross-Section 10,0-50,0 mm² (8;6;4;2;1 AWG)
• Releasable ratchet ensures the complete crimp process
• Special-designed ergonomic handles prevents slipping
Terminal / Connector Type
Crimping Profile

9. CRIMPING
TOOLS
9
CRIMPER IT 6 S - 562120
Crimping Range Red 0,5-1,0 ( 20-18 AWG)
Blue 1,5-2,5 (16-14 AWG)
Yellow 4,0-6,0(12-10 AWG)
• Red/blue/yellow round type DIN cable lugs, pin cable lugs, female FASTON
cable lugs, male FASTON cable lugs, male terminals, cable joints
• Special-designed ergonomic handles prevents slipping
Terminal / Connector Type
Crimping Profile

10. 10
CABLE
STRIPPERS
STRIPPER 16 - 562114
Cable Cross-Section 0,03-16 mm²
Terminal Insertion Frontal
• Precise stripping and cutting for PVC isolated wires between 0,03 - 16 mm²
• Self-adjustment for all cross-sections with POWER PLUS feature
• Adjustable stripping length 3 - 21 mm
• Special-designed ergonomic handles prevents slipping

11. 11
CABLE
STRIPPERS
STRIPPER 28 C - 562123
Cable Diameter Ø4,5 – 29 mm
• Cable stripping as lane with patented stripping mode
• Maximum performance with less effort
• High strength special steel

12. CABLE
CUTTING TOOLS
12
CUTTER 32 - 562122
Cable Cross-Section Solid:
max. 25/15 mm AL/CU diameter
Stranded:
max. 32 mm diameter or 300 mm²
• High strength special steel
• Locking lever
• Step-wise and burr-free cutting
• Release possibility in every cutting position
• Hand tool model
• Special-designed ergonomic handles prevents slipping
12

13. 13
WIRING DUCT
CUTTING TOOLS
RAIL
CUTTING TOOL
13
KKMR
553230
KMK 1002
553220
KRKM
500650
• Burr-free cutting of
wiring ducts and wiring
duct covers
• Straight or 45º cutting
options
• Equal force distribution
across blades helps
homogenous cutting
• Cutting up to 100 mm
width
• 3 different cutting slots
• Clean Cut
• Lossless cutting
• Non-blunting knife
• Length adjustment
guide
• Cover cutting
• Burr-free cutting
• Non-blunting knife
• Length adjustment
guide
• Cutting up to 125 mm
width
Cutting Type Straight
Max. Width 125 mm
Length
Adjustment
100 cm
Cutting
Thickness
1.5 mm
Cutting
Capacity
7.5x35 mm
15x35 mm
Tij Ø8mm
Length
Adjustment
100 cm

14. TERMINAL BLOCK
SCREWDRIVERS
14
NON-ISOLATED
TERMINAL BLOCK SCREWDRIVERS
Order. No. Type Description
561 010 IKT 1 2,5x75. -Flat
561 020 IKT 2 3,0x100. -Flat
561 030 IKT 3 3,5x100. -Flat
561 040 IKT 4 4,0x125. -Flat
561 050 IKT 5 5,5x150. -Flat
561 060 IKT 6 6,5x200. -Flat
Order. No. Type Description
561 110 KK 1 140 mm.
561 120 KK 2 180 mm.
Order. No. Type Description
560 010 KT1 2,5x75. -Flat
560 020 KT2 3,0x100. -Flat
560 030 KT3 3,5x100. -Flat
560 040 KT4 4,0x125. -Flat
560 050 KT5 5,5x150. -Flat
560 060 KT6 6,5x200. -Flat
ISOLATED
TERMINAL BLOCK SCREWDRIVERS
MAINS TESTER
14

16. HAND TOOLS (2016)
293466516057639020000001
6.6.4.2.2.00248
www.klemsan.com.tr
RevisionNo:10032016
Factory
Kemalpaşa Yolu 3. km 35170
İZMİR / TURKEY
Tel : (+90 232) 877 08 00
Fax : (+90 232) 877 08 06
OVERSEAS OFFICES
Sales Head Office
Perpa A Blok K:2 No: 9/0041
Okmeydanı – İstanbul / TURKEY
Tel :+90 (212) 222 52 00
Fax :+90 (212) 222 66 55
Russian Federation
141400, Khimki,
Zavodskaya 2- Moscow
Tel : +7 495 644 02 21
China
Rm.1707,no.218,Hengfeng road,Morden
Traffic Business Building, Zhabei
District,Shanghai. 200070
Tel :+86 21 62260338
Fax :+86 21 62263983
USA
525 N. Tryon St.Suite 1600
Charlotte, NC 28202
Tel : +1 980 226 06 88
U.A.E
Z Building Z 57 Saif ZoneSharjah
Tel :+971 6-557 37 10
Gsm :+971 56-760 28 37
Ukraine
6-8A, Yaroslava Ivashkevicha Str.
Office 7-8 04074, Kiev
Tel :+380 637 217 185
Colombia
Gsm :+57 304 427 73 59
Mexico
Gsm :+52 (55) 4511 8809
İran
No.592-594 - Corner of
Aghabalazadeh St. South Kargar
Ave. Tehran/IRAN
Tel :(+9821) 55425407-9
Fax :(+9821) 55425407-9