Mikrotik

1. wenkhairu
Administrator
Posts: 679
Joined: Dec 2009
Reputation: 33
Seting Mikrotik untuk Warnet
udah banyak pastinya artikel yang ngebahas masalah ini, kali ini ane coba nambahin aja, maaf
kalo threadnya ga berbobot ya, maklum masih hijau ane :)
spesifikasi yang kita butuhkan
Code:
- 1 Line Internet DSL 1 MBPS MAX
- Routerboard RB450, RB450g atau PC
- 5 Interface
- Bandwidth Limit dan Bandwidth Shapping
- CIR 64kbps
- MIR 256kbps
- No Hotspot
- PC Optimal Up to 10 PC + 1 Billing
- IP Ether1 : 10.10.10.1 ( to LAN)
- IP Ether2 : 10.10.11.2 (to Modem Dsl)
- IP LAN Modem DSL 10.10.11.1
- DNS Resolver dapat di ubah sesuai dengan kebutuhan
- IP Terimal Rang 10.10.10.100 - 10.10.10.110
- Netmask 255.255.255.0
- Gateway 10.10.10.1
- DNS Primary Terminal 10.10.10.1
- DNS Secondary Terimal di set sesuai kebutuhan
- Topologi : Modem DSL --> ether2 Mikrotik --> Router Mikrotik --> Ether1
Mikrotik --> Switch --> PC Terminal
langkah 1
install mikrotik OS, ane rasa dah banyak yang bahas ini :)
langkah 2
Set Ip Address Tiap interface
Code:
ip address add address=10.10.10.1/24 interface=ether1
ip address add address=10.10.11.2/24 interface=ether2
langkah 3
Setting DNS Resolver Mikrotik dan PC
Code:

2. ip dns static add name=sobatkucyber.com address=10.10.10.1
ip dns set primary-dns=10.10.11.2 secondary-dns=202.134.1.1 allow-remote-
requests=yes
langkah 4
Masq Jaringan LAN
Code:
ip firewall nat add chain=srcnat src-address=10.10.10.0/24 action=masquerade
langkah 5
Memberikan Nama Router
Code:
system identity set name=sobatku
langkah 6
Set jam Otomatis
Code:
system ntp client set primary-ntp=0.pool.ntp.org secondary-
ntp=3.pool.ntp.org enabled=yes
langkah 7
menentukan Default Routing
Code:
ip route gateway=10.10.11.1
langkah 8
Membuat Mark Connection yang nantinya di pakai untuk memilah Paket
Code:
ip firewall mangle add chain=forward src-address=10.10.10.100 action=mark-
connection new-connection-mark=billing
ip firewall mangle add chain=forward src-address=10.10.10.101 action=mark-
connection new-connection-mark=pc1
ip firewall mangle add chain=forward src-address=10.10.10.102 action=mark-
connection new-connection-mark=pc2
ip firewall mangle add chain=forward src-address=10.10.10.103 action=mark-
connection new-connection-mark=pc3
ip firewall mangle add chain=forward src-address=10.10.10.104 action=mark-
connection new-connection-mark=pc4
ip firewall mangle add chain=forward src-address=10.10.10.105 action=mark-
connection new-connection-mark=pc5
ip firewall mangle add chain=forward src-address=10.10.10.106 action=mark-
connection new-connection-mark=pc6
ip firewall mangle add chain=forward src-address=10.10.10.107 action=mark-
connection new-connection-mark=pc7
ip firewall mangle add chain=forward src-address=10.10.10.108 action=mark-
connection new-connection-mark=pc8
ip firewall mangle add chain=forward src-address=10.10.10.109 action=mark-

3. connection new-connection-mark=pc9
ip firewall mangle add chain=forward src-address=10.10.10.110 action=mark-
connection new-connection-mark=pc10
langkah 9
Membuat mark packet untuk Queue, yang didapat dari mark connection
Code:
ip firewall mangle add chain=forward connection-mark=billing action=mark-
packet new-packet-mark=billing
ip firewall mangle add chain=forward connection-mark=pc1 action=mark-packet
new-packet-mark=pc1
ip firewall mangle add chain=forward connection-mark=pc2 action=mark-packet
new-packet-mark=pc2
ip firewall mangle add chain=forward connection-mark=pc3 action=mark-packet
new-packet-mark=pc3
ip firewall mangle add chain=forward connection-mark=pc4 action=mark-packet
new-packet-mark=pc4
ip firewall mangle add chain=forward connection-mark=pc5 action=mark-packet
new-packet-mark=pc5
ip firewall mangle add chain=forward connection-mark=pc6 action=mark-packet
new-packet-mark=pc6
ip firewall mangle add chain=forward connection-mark=pc7 action=mark-packet
new-packet-mark=pc7
ip firewall mangle add chain=forward connection-mark=pc8 action=mark-packet
new-packet-mark=pc8
ip firewall mangle add chain=forward connection-mark=pc9 action=mark-packet
new-packet-mark=pc9
ip firewall mangle add chain=forward connection-mark=pc10 action=mark-packet
new-packet-mark=pc10
langkah 10
Membuat Parent tertinggi Queue
Code:
queue tree add name=sobatku parent=ether2 max-limit=10000000
langkah 11
Membuat Queue per terminal
Code:
queue tree add name=pcbil packet-mark=billing parent=sobatku limit-at=64000
max-limit=250000
queue tree add name=pc1 packet-mark=pc1 parent=sobatku limit-at=64000 max-
limit=250000
queue tree add name=pc2 packet-mark=pc2 parent=sobatku limit-at=64000 max-
limit=250000
queue tree add name=pc3 packet-mark=pc3 parent=sobatku limit-at=64000 max-
limit=250000
queue tree add name=pc4 packet-mark=pc4 parent=sobatku limit-at=64000 max-
limit=250000
queue tree add name=pc5 packet-mark=pc5 parent=sobatku limit-at=64000 max-
limit=250000
queue tree add name=pc6 packet-mark=pc6 parent=sobatku limit-at=64000 max-

4. limit=250000
queue tree add name=pc7 packet-mark=pc7 parent=sobatku limit-at=64000 max-
limit=250000
queue tree add name=pc8 packet-mark=pc8 parent=sobatku limit-at=64000 max-
limit=250000
queue tree add name=pc9 packet-mark=pc9 parent=sobatku limit-at=64000 max-
limit=250000
queue tree add name=pc10 packet-mark=pc10 parent=sobatku limit-at=64000 max-
limit=250000
Untuk CIR dan MIR dapat di sesuaikan dengan kesiapain Bandwidth yang didapat dari ISP
Saran untuk setting CIR adalah total dari jumlah PC yang di queue kan jika di kalikan dengan
Nilai CIR tidak melebihi Bandwidth minimal yang bisa di dapat dari ISP biasanya menggunakan
64k, total dari 64kx11 PC sekitar 700an kbps. Jika ente yakin ISP ente bisa memberikan 1 mbps
pada saat peak time, ente dapat mendapatkan Nilai CIR dari total Bandwidth di bagi jumlah PC.
semoga bermanfaat,
maaf kalo cupu, ini untuk kasus sederhana :)