Mcx connector series

... A Vital Part of Connection World

CMPTER
Cable Connectors
PCB Connectors
Assembly Instructions
Mounting Holes

MCX CONNECTORS

COPYRIGHT © CMPTER ELECTRONICS 2012

MCX Series Coaxial Connectors CMPTER
DESCRIPTION
MCX connector are developed in Europe during the 1980s, use a snap-on interface, a blend of size,
reliability and performance, Though smaller and lighter than the SMB by approximately 30%, the MCX still
preserves the SMB's inner contact and overlapping dielectric insulator dimensions so that it can provide
consistent electronic performance from DC-6 GHz..

Miniature snap-on connectors which offer an excellent blend of size, weight, durability, and performance
for applications such as GPS, wireless communication, base station,WLAN, fixed communication sys-
tems, testing, and instrumentation applications.

CONTENTS

Description .............................................................................. 1
Interface dimensions .................................................................... 2
Technical data ........................................................................... 3
Cable connectors ....................................................................... 4
PCB Connectors ........................................................................ 7
Assembly instruction .................................................................... 8
Mounting Holes ..........................................................................13

Tel : +86-511-8443 6131 Fax : +86-511-8502 5485 Email : sales@cmpter.com Website: www.cmpter.com
#45 ZhongShan East Road, ZhenJiang 212003, JiangSu, China

1

MCX SERIES CMPTER
PLUG JACK

mm inch mm inch
LETTER LETTER
min. max. min. max. min. max. min. max.
1 4 - .163 1 4.00 4.12 .157 .162
2 2.80 3.2 .110 .126 2 2.60 2.80 .102 .110
3 2.80 .110 3 2.30 2.80 .090 .110
5 0 0.30 0 .012 4 0.75 .029
0.85 .033
6 0.15 0.06 5 0 0
7 1.20 0.47 α 18° 22° 18° 22°
A 3.40 1.34 β 43° 47° 43° 47°
B 3.05 NOM. .120 NOM. A 3.80 .150
C 3.00 .118 B 3.42 3.48 .135 .137
E 0.25 0.10 C 1.98 .078

F 0.48 0.53 0.19 .021 F 3.00 .118
G 2.00 .079 G 3.05 NOM. 3.05 NOM.
H 3.60 .142 H 3.60 3.75 .142 .148

J 3.80 .150

Interface dimensions conformable to the standards:
International: IEC 61169-4
Europe: CECC 22190
Germany: DIN 47223, VG 95250

IP rating (interface, mated) IP68


2

TECHNICAL DATA CMPTER
ELECTRICAL DATA

Impedance 50 Ohm
Frequency range DC 0-6 GHz

Voltage Rating 250 V peak
Straight styles: 1.20
V.S.W.R.
Right angle styles: 1.25
Insulation resistance 10,000 M Ω

Center contact: 6 Ω ;
Contact resistance
Outer contact: 3 Ω

MECHANICAL DATA

Mating Slide-on, push-pull, threaded
Connector Durability (matings) 500 mating

MATERIAL DATA

Male Contact Brass
Female contact Beryllium copper center and outer, gold plated
Insulator Teflon
Crimp Ferrule Copper

ENVIRONMENTAL

Temperature Range -40 °C to + 155 °C
Thermal shock MIL STD 202 - method 107 condition C
High temperature test MIL STD 202 - method 108A condition D
Corrosion MIL STD 202 - method 101 condition B
Vibration MIL STD 202, method 204, condition D


3

CABLE CONNECTORS CMPTER
Straight cable plugs (male) RoHS

Finish
P/N Cable Type Assembly Instruction Notes
Center Body
30-03-1M04-001 LMR100/RG174/RG316 Gold Gold A01

4.00 [.157 DIA.]
3.20 [.126 DIA.]
1.65 [.065 DIA.]
2.70 [.106 DIA.]
Cable entry crimp
Centre contact soldered
15.70 [.618]
10.00 [.394]

Finish
Center Body
30-03-1M12-002 RG178 Gold Gold A01
3.20 [.126 DIA.]
1.05 [.041 DIA.]

2.30 [.091 DIA.]
1.90 [.075 DIA.]

Cable entry crimp
Centre contact soldered 14.20 [.559]

7.00 [.276]

Finish
Center Body
30-03-2M11-004 Semi-rigid .086/RG405 Gold Gold A02
3.40 [.134 DIA.]
2.20 [.087 DIA.]

Cable entry soldered
13.20 [.520]


4

Right angle cable plugs (male) RoHS

Finish
Center Body

4.00 [.157 DIA.]
3.20 [.126 DIA.]
8.90 [.350]

Cable entry crimp
10.50 [.413]

1.65 [.065 DIA.]
2.70 [.106 DIA.]

Finish
Center Body
30-13-1M12-006 RG178 Gold Gold A03
3.20 [.126 DIA.]
2.30 [.091 DIA.]

8.90 [.350]
Cable entry crimp
7.00 [.276]
9.00 [.354]

1.05 [.041 DIA.]
1.90 [.075 DIA.]

Finish
Center Body
30-13-2M06-007 RG402/Semi-rigid .141 Gold Gold A04

10.00 [.394]

Cable entry crimp
8.00 [.315]


3.70 [.146 DIA.]
5.00 [.197 DIA.]


5

Straight cable jacks(female) RoHS

Finish
Center Body

4.00 [.157 DIA.]
3.20 [.126 DIA.]
1.65 [.065 DIA.]
2.70 [.106 DIA.]
Cable entry crimp
10.00 [.394]
4.50 [.177 DIA.]

Finish
Center Body
30-02-1M12-011 RG178 Gold Gold 3.20 [.126 DIA.]
A01
1.05 [.041 DIA.]

2.30 [.091 DIA.]
1.90 [.075 DIA.]

Cable entry crimp
14.00 [.551]
4.50 [.177 DIA.]

7.00 [.276]

Finish
Center Body
30-02-2M23-012 1.13mm/1.32mm/ Gold Gold A05
1.37mm Cable
3.20 [.126 DIA.]

Cable entry solder
15.00 [.591]
4.50 [.177 DIA.]


6

PCB CONNECTORS CMPTER
PCB jacks(female) RoHS

Finish
P/N Mount Hole Notes
Center Body
30-02-5L2-013 M01 Gold Gold

0.95 [.037 DIA.]
9.50 [.374]
With stand-off

3.00 [.118]
3.00 [.118]
4.50 [.177] 4- 0.80 [.031 SQ.]
4.50 [.177 DIA.]

0.25 [.010]
4.00 [.157] 6.00 [.236 SQ.]

Finish
P/N Soldering Pads Notes
Center Body
30-12-5L2-014 M01 Gold Gold
0.95 [.037 DIA.]

10.00 [.394]

4.00 [.157]
3.00 [.118]

With stand-off 0.25 [.010] 3.00 [.118]
6.00 [.236 SQ.]
9.00 [.354]

4- 0.80 [.031 SQ.]

4.50 [.177 DIA.]

Finish
P/N Mount Hole Notes
Center Body
30-12-6L2-015 M02 Gold Gold
0.95 [.037 DIA.]

6.00 [.236]
3.00 [.118]

SMT mounted
0.35 [.014] 3.00 [.118]
6.00 [.236 SQ.]
9.00 [.354]
6.00 [.236]

4.50 [.177 DIA.]


7

ASSEMBLY INSTRUCTIONS CMPTER
A01 Ferrule Center Contact
Body Stripping Dimensions
c
b a

Heatshrink sleeve
(option)

HEX. Crimp Tool Stripping Length (mm [in])
P/N Cable Type
(mm [in]) a b c
30-03-1M12-002
RG178 2.54 [.100] 2.5 [.098] 2 [.079] 8.5 [.335]
30-02-1M12-011
30-03-1M04-001
LMR100/RG174/RG316 3.25 [.128] 2.5 [.098] 2 [.079] 10 [.394]
30-02-1M04-010

1. Slide the heatshrink sleeve onto the cable (option). 4. Slide the cable into the body until stops.
Slide the ferrule onto the cable.
Strip the cable as Striping Dimensions.
3
1

1
2

2. Slide the center contact on until it bottom against 5. Slide the ferrule over the braid.
the cable dielectric. Crimp the ferrule with crimping tool (see table).
Solder the center contact onto the cable. 2

2

1
1

3. Fan the braid. 6. Cut the excess of braid if necessary.
Slide the sleeve over the ferrule and heatshrink
1 it in place (option). 1
2


8

A02
Body
Center Contact Stripping Dimensions

a

Heatshrink sleeve
(option)

P/N Cable Type Stripping Length (mm [in]) Notes

30-03-2M11-004 RG405/Semi-rigid .086 3.00 [.118]

1. Slide the heatshrink sleeve onto the cable (option). 4. Solder the body onto the cable.
1

1
2

2. Slide the center contact on until it bottom against 5. Slide the heatshrink sleeve over the body and
the cable dielectric. heatshrink it in place (option).
Solder the center contact onto the cable.
1

2

1

3. Slide the cable into the body until it stops.

1


9

A03 Ferrule
Cap
Stripping Dimensions
c
b a
Heatshrink sleeve
(option) Body

P/N Cable Type
(mm [in]) a b c
30-13-1M12-006 RG178 2.54 [.100] 1.2 [.047] 2.3 [.091] 7.5 [.295]
30-13-1M04-005 LMR100/RG174/RG316 3.25 [.128] 1.2 [.047] 2.3 [.091] 9 [.354]

1. Slide the heatshrink sleeve onto the cable (option). 4. Crimp the ferrule with crimping tool (see table).
Slide the ferrule onto the cable. Solder the inner conductor.
1
2

3

1
2

2. Fan the braid. 5. Place the cap into the body. 1

1

3. Push the body under the braid. 6. Press on the cap until stops.
Slide the ferrule over the braid. Slide the sleeve over the ferrule and heatshrink
it in place (option).
2 1

1
1

10

A04 Back Nut


a
Body
Heatshrink sleeve
(option)

P/N Cable Type Stripping Length (mm [in]) Notes

30-13-2M06-007 RG402/Semi-rigid .141 3 [.118]

1. Slide the heatshrink sleeve onto the cable (option). 3. Solder the cable onto the body.
Strip the cable as Striping Dimensions. Screw the back nut onto the body.

1 2
2 1

2. Slide the cable into the body until it stops. 4. Slide the sleeve over the body and heatshrink
Solder the inner conductor. it in place (option).

2 1

1


11

A05 Center Contact

c
b a
Solder Sleeve Insulator

Body

P/N Cable Type
(mm [in]) a b c
30-03-1M12-002 1.13mm/1.32mm/1.37mm Cable 2.54 [.100] 2.5 [.098] 1 [.039] 11 [.433]

1. Strip the cable as Striping Dimensions. 4. Slide the cable into body until it stops.
Soaking the inner and outer conductor with tin.

1

1

2

2. Slide the Solder Sleeve onto the outerductor. 5. Crimp the Body with crimping tool (see table).
Solder the Solder Sleeve onto the cable (ensure Slide a Heatshrink Sleeve over the Body and
the position of the Solder Sleeve). heatshrink it in place (option).
1
2 Flush

1

3. Slide the Insulator onto the dielectric until it stops.
Slide the Center Contact onto the cable until it stops.
Solder the Center Contact onto the cable.

3

2
1

12

MOUNTING HOLES CMPTER
4-
1.4
0[
05 1.20 [.047]
5D
IA]

3.25 [.128]
3.50
[.138
DIA.
]

6.50 [.256]
5.20 [.205]

1.1 .]
0 [. DIA
043 [ .043
DIA
] 1.10
2.05 [.081] 2.40 [.094]
5.20 [.205]
6.50 [.256]

M01 M02


13

Cmpter Electronics, Ltd.

Office Adress: #7-5, East Business Area, DanTu District,
ZhenJiang City, 212028, JS, China
Tel:+86 511 8443 6131
Fax:+86 511 8717 7136
Email: sales@cmpter.com
Website: http://www.cmpter.com

Mcx connector series

Recommended

Recommended

More Related Content

Similar to Mcx connector series

Similar to Mcx connector series (20)

More from Echo Dong

More from Echo Dong (16)

Recently uploaded

Recently uploaded (20)

Mcx connector series