This Breakout and Development Interface Board is designed for the NI single Board sbRIO-9623 through 9636. It provides easy access to the DIO/MIO channels which simplifies developing custom sbRIO applications. NI single board sbRIO-9623 through 9636 are provided with 50-pin IDC header connectors designated as DIO ”J502” and MIO ”J503” (see sbRIO operating instructions and specification manual for detail) with direct access to built-in 16 channels analog input, 4 channels analog output and 4 to 28 digital I/O lines The sbRIO-9623 and 9626 also include a RIO Mezzanine Card (RMC) connector that can be combined with NI 9693 two-slot C series RIO Mezzanine card for a flexible and fast prototyping of embedded systems. The Breakout board is a direct-mate to DIO/MIO connectors or can be connected to sbRIO device via 50-pin ribbon cable with IDC header. Quick Prototyping with the Breakout Interface Board Quick prototyping is accomplished by using two separate bread boarding areas for analog and digital circuits. All analog and digital lines are available through 9 terminal blocks. These blocks are distributed around the edges of the PCB assembly. You can also access the same signals through 9 socket strips with standard 0.1” spacing running parallel to the terminal blocks. Breadboard vs Proto-board Bread boarding allows quick and solderless circuit development using inexpensive mini modular Breadboard such as sparkfun “PRT-11660” which can be mounted directly over the prototyping areas. However, proto boarding areas are double sided PCB with separate analog and digital internal ground plane layer. Each area is approximately 1.8” long and 1.4” wide with 204 plated through holes that can be used for permanent circuit prototyping

1. NI sbRIO-96XX Series DIO/MIO Breakout
and Development System
System Main Features:
 Ready to use prototyping system for NI
single board sbRIO-9626 trough 9636
Embedded Devices
 Housed in wall mounted case with
separate terminal compartment
 Built-in power supply and fan control
http://ScientificRFA.com

2. NI sbRIO-96XX Series DIO/MIO Breakout
and Development System
Breakout Board Features:
 Direct-mate to DIO/MIO 50-pin IDC Headers
 Easy Access to all Analog and Digital I/O Lines
 Separate Analog and Digital Prototyping Area
 Separate Analog and Digital Ground Planes
 Dual Entry Power Supply for Analog Circuits
 +5V Supply with Fuse for Digital Circuits
http://ScientificRFA.com 9/23/2014

3. NI sbRIO-96XX Series DIO/MIO Breakout
and Development System
Breakout Board Features:
 Optional Mini Modular Peel and Stick Breadboards
 Great for Quick Prototyping and Testing Circuits
 Many Colors to Choose From
http://ScientificRFA.com
9/23/2014

4. NI sbRIO-96XX Series DIO/MIO Breakout
Breakout Board Features (Solder Side):
 All Digital and Analog Lines are Clearly Marked
 IDC Connectors Can be Mounted on Either Side of the Board
Example: One Header for mating with sbRIO Mounted on the
Solder Side and the Second Header for Mating with C series
Modules Mounted on the Component Side.
http://ScientificRFA.com
and Development System
9/23/2014

5. NI sbRIO-96XX Series DIO/MIO Breakout
Possible System Configuration :
 Direct-mate with sbRIO-96XX Series Device
 Compact, Easy access to all Analog and Digital Lines
 Will not Interfere with any I/O Ports on sbRIO
http://ScientificRFA.com
and Development System
9/23/2014

6. NI sbRIO-96XX Series DIO/MIO Breakout
Possible System Configuration :
 Ribbon Cable Connection
 Most Flexible when Working on a Bench
 Great for Experiment, Testing , and Proof of
Concept Design.
http://ScientificRFA.com
and Development System
9/23/2014

7. NI sbRIO-96XX Series DIO/MIO Breakout
Daughter Board :
 Mates with the Breakout Board (Stackable)
 Access to all Digital and Analog Lines + Other Signals
from the Breakout Board
Example:
Circuits requiring large space on the board, e.g. , Signal
Conditioning , Power Relays, Stepper Motor Driver, etc.
http://ScientificRFA.com
and Development System
9/23/2014

8. NI sbRIO-96XX Series DIO/MIO Breakout
Bread boarding Scenario (ECG Monitoring Sys) :
Quickly breadboard circuits for testing and proof of
concept using off-the-shelf breakout boards such as
following parts from sparkfun.
 Opto-isolator Breakout (BOB-09118)
 Single Lead Heart Rate Monitor (SEN-12650)
 Rotary Encoder LED Ring (COM-10408)
http://ScientificRFA.com
and Development System
9/23/2014

9. NI sbRIO-96XX Series DIO/MIO Breakout
Protoboarding Scenario (ECG Monitoring Sys) :
Assemble and solder your circuit as shown on the right. The ECG
monitoring system has the following features:
 2500Vrms Isolated DC-DC Converter
 Single Lead Heart Rate Monitor Breakout Board
 2500Vrms Analog Optocoupler Isolation Circuit
 Rotary Encoder for Alarm and Visual Display of the Heart rate.
http://ScientificRFA.com
and Development System
9/23/2014

10. NI sbRIO-96XX Series DIO/MIO Breakout
C Series Modules Interface
The Breakout board can be interfaced to any “C Series”
Modules. In this example we use NI 9403 (32-channel DIO)
connected via ribbon cable shown on the right.
This configuration will add 24 extra digital lines to the
breakout board’s terminal blocks.
http://ScientificRFA.com
and Development System
9/23/2014

11. NI sbRIO-96XX Series DIO/MIO Breakout
Four Channels High Power Switching Sys
In this scenario we have assembled four channels
of high speed power switching system that is
capable of handing voltages up to 100 volt at 5Amp
per channel ranging from DC and up to 50KHz.
http://ScientificRFA.com
and Development System
9/23/2014

12. NI sbRIO-96XX Series DIO/MIO Breakout
General Purpose Embedded System:
In this scenario, we have packaged the NI
sbRIO-9626 with the following components
for a general purpose embedded control
and acquisition system.
 NI sbRIO-9626, Embedded Device
 NI 9693, 2-Slot C Series RMC
 NI 9403, 32-Channel DIO
 NI 9211, 4-Channel TC Module
 ScRFA-96XX Breakout Board
 ScRFA Daughter Board
 Power Supply
 A9732112 , WalltecWall Mounted Case
http://ScientificRFA.com
and Development System
9/23/2014

13. NI sbRIO-96XX Series DIO/MIO Breakout
http://ScientificRFA.com
and Development System
9/23/2014
General Purpose Embedded Sys (Examples)
With this configuration we are developing
codes for the following products;
1. Triple Output Power Supply
2. Precision Programmable Power Source
3. Battery Charging / Testing System
4. AC Single Phase Power System
5. AC Multi-Phase Power System
6. Thermoelectric Heating / Cooling System
7. Magnetic BH Loop Testing
8. Stepper Motor Drive
9. UPS Emergency Power System

14. NI sbRIO-96XX Series DIO/MIO Breakout
and Development System
For more information email:
info@ScientificRFA.com
http://ScientificRFA.com