HDPE FOR AUTOMOTOTIVE

1. HDPE PE 100, 5 kg-60 kg PRESSURE
MANUFACTURE / PRODUCTION OF:
1. 20 mm – 2000 mm ID / OD Pipe
2. Pipe Thickness : 2 mm- 200 mm
3. Pipe Length : 6 m – 60 m long.
4. Pipe Fittings, Valves.
5. Sheet : 2 mm – 200 mm thick.
6.Sheet : 100 mm – 3600 mm width.
7.Sheet : 1000 mm - 100,000 mm long.
8.Flats, Angles, I, Z, [, X, Y, A, C, H, J, S, T, U. V.
9.Rods Dia: 2 mm – 200 mm. 200 m long.
10. 1000 m x 1000 m , 20, 30, 50 m high Hanger.
11. Building- wall, floor, stairs, lift
12. Roads, Bridges, Float barge to take vehicle
13. Ship 10t-1000t,100TEU, 2 m draft, 330 knot
14. No Carbon Jet, Missile. 1,2,3,6 mach.waterL
15 16 kg HDPE piped no carbon Automotive.
16 16 kg HDPE sheet reinforced Automotive.
17 200 ton trailor
18 20-200 ton Automotive on Land, Snow,
Marsh, Sand, Water.
19 Samurai Sword. Industrial Shear cut.
20 100 m x 100 m Plane Table in Metal. 5 mu.
21 Wood reinforced HDPE furniture. No metal.
22. 3 D Printer in HDPE 16 kg plastic
23. 2.5 D Router in HDPE 16 kg plastic
24. Non Metal Cast HDPE propeller