The spiral wound gasket is produced by the spiral wound. A V-shaped metal strip and a strip of non-asbestos filler material are spiral curved.

1. 1
Spiral wound gasket will
solve its anti-leakage
objective!
The spiral wound gasket is produced by the
spiral wound. A V-shaped metal strip and a
strip of non-asbestos filler material are
spiral curved. The metal strip holds the
filler and provides mechanical resistance
as well as flexibility. A spiral wound gasket
can be reinforced by an outer concentric
ring and / or internal retaining ring. It is
designed in this way and is highly useful. It
can be used in many applications and gives
great results. Visit the website for more
information.
https://www.americansealandpacking.com/
spiral-wound-gaskets.html

2. INSTRUCTIONS
FOR USE
2
Need sheet packing to
get it here!
Different types of the gasket are available. One of
them is a sheet. It is a commonly used non-metal
that fits perfectly in some applications. The gasket
is a major requirement for a lot of things. This
increases their demand and it has increased more
than ever. Gasket material has been used since the
past. Nowadays they are not only the fitting option
but also the main components. Most industries are
incomplete without them and the construction of
new machinery is also dependent on them. A seal
plays an important role in protecting and avoiding
leakage. Visit the website for more information
https://www.americansealandpacking.com/sheetga
sketing.htm

3. 3
Graphite packing is the best investment to
avoid leakages!
Graphite packing is used in steam
turbines as well as high-temperature
valves. Where gaskets may be required
for small applications or seals require
packing. Get the finest packing in
American Seal and Packing designed to
give the user the greatest results in
terms of leak control, service life, and a
reliable, cost-effective product. If you
want more information about it then go
to the website.
https://www.americansealandpacking.c
om/dieformedgraphite.htm

4. INSTRUCTIONS
FOR USE
4
O-ring will let your business run!
An O-ring is in the shape of a torus. That is why
it has a secondary name known as a packing or
toric joint. It is a mechanical gasket-shaped
torus. It is a loop of elastomers with cross-
sections. They are designed so that they can be
seated in a groove and compressed during
assembly between two or more parts, forming a
seal at the interface. Get these useful sets of
rings for your application now. Visit the website
for more information.
https://www.americansealandpacking.com/O-
rings.html

5. 5
America Seal and Packing
Address: 1537 E. McFadden
Ave. Suite A, Santa Ana, CA.
92705 Santa Ana, CA. 92705
https://www.americansealandpacking.com
Mobile :No
9997583835