This document describes spill containment systems called Well-Shield and Site-Shield units. The units are made of durable, waterproof vinyl-coated polyester fabric and coated with polyurethane and rubber for strength and safety. Well-Shield units are comprised of connecting base units that form a berm when filled with water, and a skirt that secures around the well. They contain spills of up to 3.8 barrels and install in about 5 minutes with 1-2 people. Site-Shield units provide containment for work areas. The document provides contact information for more product details.
2. General Product Information
CONTAINMENT
Well-Shield and Site-Shield, Patent Pending Spill Containment Units are engineered, designed,
and fabricated to provide our customers with; dependability, with safety and environmental
commitment built into each design.
QUALITY MATERIALS
All Well-Shield and Site-Shield Spill Containment Units are hand-made using 42 mill thick, 40-oz,
vinyl coated polyester fabric. This industrial-use fabric is waterproof, highly resistant to acid and
oil, as well as being abrasion resistant with a high tear strength.
3. DURABILITY
During the final stages of our building process, the “work areas” of our containment units are
coated with an additional 1.3 mills of a polyurethane and rubber non-skid layer, creating a safer
work environment for personnel while adding to the strength and dependability of your
containment.
9’X9’ SITE-SHIELD UNIT
SAFETY AND ENVIRONMENTAL COMMITMENT
The unit’sberms are created with a 4 inch lay-flat hose which is built into the containment system
for added durability.
Hose fittings are crossedover to a ¾” crowfoot connection, common fittings for an easy rig-up.
The hose takes only minutesto fill with water, creating a solid bermwhile anchoringthe unit in
place with hundredsof poundsof water weight.
This also eliminates the trip hazards created if ropewere used to secure the unit to the deck.
4. Our StandardSize WELL-SHIELD unit on a 26”
casing.
EASY INSTALLATION
Well-Shield units are a 3-part system which is comprised of 2 base units and a skirt.
1. The Base units are placed around the well and connected together with 4” Cam-loc
connections.
2. The unit’s berm is then filled with water creating a 4” Berm.
3. Velcro ™ flaps are then closed to secure the seam between the two units.
4. The Skirt is then installed around the well and secured to the well and the base units.
Rig up time is approximately 5 minutes with only one to two personnel required.
The standardWell-Shield Unit has a containment capacity of 3.8BBLS of fluid with approximately
80 sqft of coverage area.
5. Custom WELL-SHIELD unit custom built to fit the well bay; rigged up
around a 26” casing.
Before and after; land location; 10 ½ casing, with a surface leak. All leaks during the duration of this project
were captured by the Well-Shield unit.
6. Well-ShieldBase Unit for a 30-36” casing
For additional product informationpleasecontact:
Jason Wilke
President
Legacy Shield
Spill Containment Systems
1117 Hugh Wallis Rd
Suite 102
Lafayette, La 70508
Cell: 337-251-1786
Office: 337-408-3634
wilke.jason@legacyshield.co