it is a ppt on production planning and control

1. PRODUCTION PLANNING &
CONTROL (PPC)
Course Instructor
Dr. Vivek Sheel Rajput
Assistant Professor
Department of Mechanical Engineering

2. Production is an organized activity of converting raw
materials into useful products. But before starting the
actual production process planning is done:
• To anticipate possible difficulties.
• To decide in advance – how the production processes
be carried out in a best & economical way to satisfy
customers.
Quantity, Quality, Time, and Price—encompass the production system.

3. Only planning of production is not sufficient. The
management must take all possible steps to see
that plans developed by the planning department
are properly adhered to and the standard sets are
attained. In order to achieve it, control over
production process is exercised.

4. Definition:
PPC may be defined as the direction and co-ordination of
the firms materials and physical facilities towards the
attainment of pre-specified production goals in the most
efficient and economical way.
Objective:
Therefore, the ultimate objective of production planning
and control is to produce products of
• right quality
• in right quantity
• at right time
By using the best and least expensive methods/procedure.

5. OBJECTIVES OF PRODUCTION PLANNING
• To determine the requirements of men, material and equipment.
• Arranging production schedules according to the needs of
marketing demand.
• Arranging various inputs at a right time and in right quantity.
Making most economical use of various inputs.
• To achieve coordination among various departments relating to
production.
• To make all arrangements to remove possible obstacles in the way
of smooth production.
• To achieve economy in production cost and time.
• To operate plant at planned level of efficiency.
• Making efforts to achieve production targets in time.

6. Elements of production planning and control:

7. Materials
Raw materials, as well as standard finished parts and semifinished products,
must be available when required, to ensure that each production operation
will start on time. Duties include the specifications of materials (both with
respect to dimensions and quality), quantities and availability, delivery date,
standardization and reduction of variety, procurement and inspection. This
function also covers the procurement of semifinished products from
subcontractors.

8. Methods
The purpose of this function is to
analyze possible methods of
manufacture and to try define the best
method compatible with a given set of
circumstances and facility. This
analysis covers both the general study
and selection of production processes
for the manufacture of components or
assemblies and the detailed
development and specifications of
methods of application. Such a study
results in determining the sequence of
operations and the division of the
product into assemblies and
subassemblies, modified by the
limitations of existing layout and work
flow.

9. Machines and equipment
Methods of manufacture have to be related to available
production facilities, coupled with a detailed study of
equipment replacement policy. Maintenance, policy,
procedure, and schedules are also functions connected with
managerial responsibility for equipment, since the whole
problem of breakdowns and reserves can be seriously
reflected in halts in production. Tool management, as well as
problems both of design and economy of jigs and fixtures
constitutes the duties of production planning and control.

10. In short, routing determines ‘What’, ‘How much’, ‘With which’, ‘How’ and
‘Where’ to produce.
Production planning and control ensures that raw materials are
transformed into finished goods using the best route possible. Eliminating
useless steps or excessive motion through the shop floor are the main
objective of this component.
Routing
Routing is the first step in production planning and
control.
Routing can be defined as the process of deciding
the path (route) of work and the sequence of
operations.
Routing fixes in advance:
➢ The quantity and quality of the product.
➢ The men, machines, materials, etc. to be used.
➢ The type, number and sequence of
manufacturing operations, and the place
of production.

11. Loading
Load means the quantity of work, and allocating the quantity of work to
the processes necessary to manufacture each item is called loading.
Loading involves assigning jobs to work centers and to various machines
in the work centers. If a job can be processed on only one machine, no
difficulty is presented.
Scheduling
Scheduling is the process of arranging, controlling and optimizing work
and workloads in a production process. Companies use backward and
forward scheduling to allocate plant and machinery resources, plan
human resources, plan production processes and purchase materials.

12. Dispatching - This phase of production planning in control involves
the execution of the production schedule. It involves the release of
materials, components, and tools to the machine operators so
that production can begin. As one can imagine, this is where the
importance of production planning and control is highlighted. If
there are any delays in procuring materials or inefficient routing or
processes, production will be hindered.
Expediting - This step is also called
Follow-Up and involves checking the
progress of production. It also involves
the follow up of materials, work in
progress, and assembly. In this step,
manufacturers should identify
bottlenecks in the production process
and work to remedy them to ensure
that the production plan is executed as
planned.

13. Evaluation
One of the most important steps in production
planning and control, and any process in general,
is to evaluate it. This portion helps identify areas
where productivity is still lacking and where
improvements could be made. Managers can then
focus on these areas and determine what needs
to be changed and then implement strategies to
improve those areas.
Inspection
Inspection is the most common method of attaining standardization, uniformity
and quality of workmanship. It is the cost art of controlling the production
quality after comparison with the established standards and specifications. It is
the function of quality control.
These in-process inspection procedures take place at any stage of production to
ensure the product quality is being met before they are finalized and continue to
the next stage. Identifying a misstep at an early stage in production gives the
ability to reset the issue and save time and resources in the long run.

14. Production System refers to that set-up of the organization, which is
engaged in producing products. It is an activity in which resources are
put together and converted into a product. This process enables adding
value to that product. Further, the process takes place as per the policies
of the management.
•Objective: Because the process of production is an organized activity.
So, it takes place with an objective.
•Transformation: Conversion of various inputs into outputs takes place
in this process.
•Feedback: Feedback about activities is necessary. This helps in
controlling and improving the performance of the system.

15. Classification of Production System

16. Intermittent production
• The production process takes place at irregular intervals to produce a
number of different products with the help of one production line.
• Manufacturers use this system to produce low-volume, high-variety
products.
Job Shop Production
• It involves the manufacturing of one or a few products within a
predetermined time and cost.
• This is because the production takes place as per the specifications of the
customer. Therefore, the products in job shop production are high in variety
and low in volume. Also, they aim to meet the requirement of the specific
order.

17. The machines are general purpose. These are set up in different departments.
Further, each job has a unique technological requirement. Also, it requires
processing on machines in a definite order.
Its sub-classification relies on the production of job
1.Only once
2.At irregular intervals
3.At regular intervals
Examples: Boutique, Automobile service center, typing shops, etc.
Characteristics of Job Shop Production
•Multiple varieties of products and low volume.
•Machines and facilities are general purposes.
•Operators are highly skilled and can perform each job in an effective manner.
They take each job as a challenge due to its uniqueness.
•There is a huge stock of materials, tools, equipment, and parts.
•In-depth planning is important to determine the need of each product, and
capacities for each work center, and to order priorities.

18. Example of Job Shop Production system

20. Batch Production
It is that type of production system in which the job passes through functional
departments, in lots. These lots are nothing but batches and each lot has a
different routing. It involves manufacturing a confined number of products. They
are similar and produced in large volumes. These products are produced at
periodic intervals and stocked awaiting sales of the batches. Its sub-classification
relies on the production of batches:
1.Only once
2.At irregular intervals
3.At regular intervals
Examples: Production of tyres and tubes, ready-made garments,
pharmaceuticals, and cosmetics.

21. Characteristics of Batch Production
•The production runs are shorter.
•Flexible plant and machinery.
•Plant and machinery set up are used to the product in the lot. After
that, the setup undergoes a change so as to process the next batch.
•Lower lead time and cost.

23. Continuous Production
Here utilization of machines and resources for producing identical products takes
place. It involves the production of large quantities of products, whose demand is
high.
Mass Production
When manufacturing of discrete parts and assemblies takes place by way of a
continuous process, it is mass production.
The production involves a large volume so as to meet demand.
In this, the arrangement of the machine is in a line. There is the standardization
of products and processes. Further, the outputs go through the same path. Also,
the materials are purchased in bulk. It requires well-researched production
planning.
Examples: Production of auto parts and industrial products.

24. Characteristics of Mass Production
➢ Standardization of sequence of product and process.
➢ Special purpose machines dedicated to higher production capacities and
output rates.
➢ Product volume is large.
➢ Cycle time of production is shorter.
➢ Lower in process inventory.
➢ Balanced production lines.
➢ The continuous flow of material components and parts. Also, it does not
have any backtracking.
➢ Easy production planning and control.
➢ Automatic material handling.
Process Production System
Assembly Production System

26. Flow Production
The need for the product forms the basis of plant design. There is no
flexibility regarding the use of resources to produce similar products. Due
to this characteristic, when there is a decrease in demand, the resources
cannot be used to produce other products. Therefore, it is discarded. So
we can say that the plant design is specific to that product only.
Examples: Cement factory, sugar factory, chemical processing, computer
keyboards, and oil refinery
Characteristics of Flow Production
•Conversion process whereby successive units of output undergo the same
operation sequence.
•Use of specialized equipment positioned along the production line

28. Summary

29. Plant layout means the disposition of the various facilities (equipment,
material, manpower etc.) and services of the plant within the area of site located.
Objectives
➢ Material handling and transportation is minimized and effectively controlled.
➢ Bottlenecks and points of congestions are eliminated (by line balancing) so that
the raw material and semi-finished goods move fast from one workstation to
other. Workstations are designed suitable and properly.
➢ Suitable spaces are allocated to production centers and service centers.
➢ The movements made by the workers minimized.

30. Layout can be classified into the following four categories:
a. Process layout
b. Product layout
c. Group or cellular layout(combination layout)
d. Fixed position layout

31. Process layout:
➢ It is also known as functional layout.
➢ Here similar machines and services located
together Ex. All the lathe machines will be at
one place and all milling machines at another
place and so on.
➢ This type of layout generally employed for
industries engaged in job-shop production and
non-repetitive kind of production.
➢ When there variety of products manufactured
at low volume we prefer this type of layout.
➢ Ex. furniture manufacturer company, restaurant
etc.

32. Principle Diagram
1-5-4-3-6-7-2-8

33. Illustrations of Process layout
Service or Repair Stations

34. Tyre Section
Tool Section

35. Car lifting (Underneath Repair)

36. Tyre Repair and Maintenance
(Balancing & Alignment)

37. Shopping Complex: Different Sections for Different products
Grocery
Clothing (Female) Clothing (Male) Bags
Restaurant Billing

38. Clothing Section or Showroom (Female)

39. Process Layout at Vermont Teddy Bear Company

42. Product layout
➢ It is also known as line (type) layout.
➢ The flow of product will smooth and logical.
➢ When the machines and auxiliary services are located according to the
processing sequence we prefer this layout.
➢ It implies that various operations raw material are performed in a
sequence and the machines are placed along the product flow line.
➢ The product layout is selected when the volume of production of a
product is high such that separate production line to manufacture it can
be justified.
➢ Assembly line production or mass production prefer this type layout.
➢ Ex. Assembly of television sets, assembly of computer key-board etc.

44. Part moves through a dedicated sequence
of operations or in a dedicated order.
Three flow lines work
together to produce a
single or final product.
Each line works with a
dedicated sequence of
operations.

45. Product Layout for candy making at Just Born, Inc

46. Flow lines for engine
assembly or subassembly;
Unidirectional
Automatic (robotic) flow
lines

47. Hyundai car assembly line/ Product layout

50. Group or cellular layout:
➢ It is the combination of both process and product layout.
➢ In this type of layout a set of machinery or equipment is grouped
together in a section so that each group of machines or equipment is
used to perform similar operations to produce a family of
components. These machines grouped in to cells.
➢ It minimizes the sum of cost of transport and the cost of equipments.
"similar things
should be done
similarly”

51. Arranging work by function, however, isn’t always efficient. Production
lines can back up, inventories can build up, workers can get bored with
repetitive jobs, and time can be wasted in transporting goods from one
workstation to another. To counter some of these problems, many
manufacturers have adopted a cellular layout, in which small teams of
workers handle all aspects of building a component, a “family” of
components, or even a finished product. Each team works in a small area,
or cell, equipped with everything that it needs to function as a self-
contained unit.
Both product and process layouts arrange work by function.

52. ➢ Machines are sometimes configured in a U-shape, with people working
inside the U.
➢ Because team members often share duties, they’re trained to perform
several different jobs.
➢ Teams monitor both the quantity and the quality of their own output. This
arrangement often results in faster completion time, lower inventory
levels, improved quality, and better employee morale.
➢ Cellular manufacturing is used by large manufacturers, such as Boeing,
Raytheon, and Pratt & Whitney (Chaneski, 1998), as well as by small
companies, such as Little Enterprise, which makes components for robots
(Modern Machine Shop Magazine, 2001; Little Enterprises, Inc., 2011).

53. Group Technology (GT)

54. ➢ GT can be viewed as a role model to obtain the advantages of flow line
systems in environments previously ruled by job shop layouts.
➢ The idea is to form groups and to aim at a product-type layout within
each group (for a family of parts).
➢ Whenever possible, new parts are designed to be compatible with the
processes and tooling of an existing part family.
The classical GT cell allows
parts to move from any
machine to any other machine.
Flow is not unidirectional.
However, since machines are
located in close proximity short
and fast transfer is possible.

57. Fixed position layout
➢ It is also called static product layout in which the physical characteristics
of the product dictate as to which type of machine and men are brought
to the product.
➢ This type layout is inherent in ship building, aircraft manufacture and big
pressure vessels fabrication.
➢ In other type layout the product moves past stationary production
equipment where as in this case men and equipment are moved to the
material at one place and the product is completed at the place where
the material lies.
➢ In producing large items, manufacturers use fixed-position layout in
which the product stays in one place and the workers (and equipment)
go to the product.

58. This is the arrangement used by General Housing Corporation in constructing
modular homes. Each house is constructed at the company’s factory in Bay City,
Michigan, according to the customer’s design. Because carpenters, electricians,
plumbers, and others work on each building inside the climate-controlled
factory, the process can’t be hindered by weather.

62. Manufacturing of Ships and Aircrafts

64. Exercise
As purchasing manager for a company that flies corporate executives
around the world, you’re responsible for buying everything from
airplanes to onboard snacks. You plan to visit all the plants that make
the things you buy: airplanes, passenger seats, TV/DVDs that go in
the back of the passenger seats, and the specially designed uniforms
(with embroidered company logos) worn by the flight attendants.
What type of layout should you expect to find at each facility—
process, product, or fixed-position? What will each layout look like?
Why is it appropriate for the company’s production process? Could
any of these plants switch to a cellular layout? What would this type
of layout look like? What would be its advantages?