kk buildtech is the one of best waterproofing contractor in delhi ncr. We deal in all kind of waterproofing, guniting, terrace insulation and etc. KK BUILDTECH doing the best work in reasonable price KK BUILDTECH have best workers with have experience. we are doing the Best work.

1. www.kkbuildtech.in
Waterproofing
Chemical Waterproofing
Bitumen Waterproofing
PU Waterproofing
Guniting
Tiling
Contact Us
Gallery
Projects
Book appoinment
Products
About
Complete waterproofing solutions for your home
kk buildtech is the one of best waterproofing contractor in delhi ncr. We deal in all kind of
waterproofing, guniting, terrace insulation and etc.
Click Here to Contact Us
Waterproofing contractor
KK BUILDTECH doing the best work in reasonable price
KK BUILDTECH have best workers with have experience. we are doing the Best work.
Do you want best work
Authorized Partner
Dr.Fixit
We are authorized applicator and partner of Dr.Fixit from 10 years. and using all their
products with all technical knowledge.
Fosroc
We are authorized applicator and partner of Fosroc from 10 years. and using all their products
with all technical knowledge.
Zydex
We are authorized applicator and partner of Zydex from 10 years. and using all their products
with all technical knowledge.
Sika
We are authorized applicator and partner of sika from 10 years. and using all their products
with all technical knowledge.
Cico
We are authorized applicator and partner of Cico from 10 years. and using all their products
with all technical knowledge.

2. BASF
We are authorized applicator and partner of BASF from 10 years. and using all their products
with all technical knowledge.
View All Products
Free Site Visit
Contact us for a free site visit by waterproofing experts
9911505849
Waterproofing is the formation of a waterproof barrier designed to prevent water from
entering or exiting various areas of the building structure. The sealing system consists of a
series of integral components that work together to prevent moisture from entering the
structure. The system configuration is generally similar for all sealing applications. The
material components common to all types of sealing applications are the structural substrate,
door, membrane and insulation.
Plaza Deck Waterproofing (Horizontal): Horizontal applications (underground or at ground
level) generally consist of the following component configuration:
structural coverage
flicker
membrane
skid plate
drainage (surface drainage)
isolation
wear surface
Underground (vertical) sealing: the typical system configuration for underground vertical
applications is as follows:
structural substrate
flicker
membrane

3. isolation
drainage course
Fill
Mud Mat: Sub-level waterproofing typically begins at the mud mat level. A mud mat is a
reinforced concrete slab or gravel bed placed under the foundation. The purpose of the mud
layer is to prevent groundwater from entering the surface of the slab. Buildings constructed
on sites with high aquifers should always include a clay mat.
These plates are used as reasonably stable all-weather mounting platforms to accommodate
the waterproofing of the underside of the wear plate as well as to support saddles and armor
tie rods with little or no deflection when installing the reinforced wear plate. Such
unreinforced floor panels will absorb moisture and water which will cause any waterproofing
system to flake from these floor panels, be it a liquid membrane or a reinforced membrane.
This is a point that must be constantly taken into consideration in the choice of materials and
protection systems.
The installation of the membrane on the mud carpet is based on the subsoil. The membrane
must be fully bonded to concrete slabs. Gluing is not possible with gravel beds, so the floor
membrane can be laid loose with glued joints. If an additional membrane is required, it must
be glued to the lower membrane. The mud cap seal should protrude 9 to 12 inches above the
foundation to allow the vertical membrane to pivot on the exposed top of the horizontal
surface.
Substrate: Waterproofing can be performed on various substrates such as concrete, fiber
cement panels, plasterboard or wood. Concrete is the best support material for waterproofing
systems. The preferred concrete substrate is a monolithic cast-in-place structural concrete
slab. This is more suitable than precast concrete, as precast concrete requires a nominal
overlap of 2 inches thick to provide a smooth, continuous surface to eliminate control joints.
Control joints are subject to load-bearing end openings of prefabricated structural elements
and would require expansion joints to accommodate movement between panels.
Connection: The sealing connection is made prior to the positioning of the membrane. This is
in contrast to roofing systems where the membrane is applied prior to flashing. Connection
plates attach to internal and external corners, penetrations, cold joints, expansion joints,
height changes and all vertical surfaces. The connection material must be approved by the
membrane manufacturer and applied according to the manufacturer’s requirements.

4. An important feature of the grooves is the reinforcing material. The lack of adequate port
reinforcement has contributed to many premature failures. Cold joints at the wall / foot and
wall / floor junctions are particularly critical. The vertical and horizontal internal and external
corners of concrete elements and cast-in-place masonry should always require the use of
compatible mesh or felts for connection reinforcement, plasterboard reinforcements or
changes of direction in the walls.
OUR WORK
Membrane: Waterproofing must be applied to all exposed substrate surfaces, especially
concrete. The membrane pressure plates in the ground can extend under the foundation walls
and over the pile heads. Foundation waterproofing should extend at least 8 inches above the
soil surface. Waterproofing materials must be coated Built bituminous membranes
modified bitumen sheets
Liquid applied membranes
single-layer membranes
Prefabricated sheets in elastomer
Prefabricated thermoplastic panels
bentonite
To be effective, the seal must consist of a complete or continuous envelope of the
underground structure, ensuring complete containment of all areas subject to hydrostatic
pressure and / or chemical contaminants. Cracks in walls not protected by crossings or other
continuations of the waterproofing system will cancel a waterproofing barrier and render it
ineffective.
Insulation: The insulation applied in waterproofing systems has two basic purposes: heat
resistance and membrane protection. Insulation in waterproofing systems must always be
placed above the membrane. In both vertical and horizontal applications, the insulation
protects the membrane from infill and construction traffic when placed over the membrane.
Waterproofing systems are exposed to higher traffic loads than roofing systems and the
insulation, with its high compressive strength, serves as additional protection. The thermal
resistance of insulation is much higher than that of aggregate or earth fill in heated and
refrigerated living spaces. Even in colder climates, the insulation, placed above the

5. membrane, keeps the membrane temperature above the dew point, preventing condensation
from forming.
Due to the placement of insulation in a waterproofing system, there is only one option for
insulation – extruded polystyrene sheets. Extruded polystyrene is the only commercially
available insulation that offers high compressive strength (60 psi) and moisture resistance.
Moisture resistance is required because the insulation is unprotected and subject to constant
ingress of moisture. Studies have shown that extruded polystyrene retains approximately 80
percent of its dry heat resistance under persistently humid conditions. Insulation should be
applied to vertical surfaces in a fully adherent application. Installation of insulation on
horizontal surfaces should be carried out in accordance with the requirements of the
manufacturer of the waterproofing system.
Protection plate: The protection plates are necessary to protect the membrane from damage
caused by other exchanges and UV rays. Since the waterproofing membrane is the first
finished component, it is not unlikely that the traffic of other traders will damage the finished
membrane, as well as the fall of equipment, machinery, scaffolding or tools. The skid plate
must be applied immediately after the completion of the waterproofing sheet flood test,
before other commercial activities are exposed to it. Any repairs required after completion of
the flood tests must be performed prior to the installation of the protection panel.
The most common type of skid plate is a laminated asphalt center plate, available in 1/16, 1/8
or 1/4 inch thicknesses. This panel is coated on one side with a polyethylene film applied to
prevent the panel from sticking during shipping and storage. Some manufacturers also
encourage the use of a polyethylene film at least 6 mil thick as a protective layer. The reason
for this is that with the nominal protective layer, membrane defects are easier to detect and
repair. In general, it should be noted that the minimal protective layer is more susceptible to
damage from equipment, machinery and scaffolding.
Drainage in vertical applications: Underground waterproofing is subject to the transfer of
water from two sources: surface and groundwater. Proper control and drainage of these water
sources are necessary for the good performance of the waterproofing system. Surface water
sources include rain, melting snow, and sprinklers. The most effective way to control surface
water is to divert it from the structure. This can be achieved by leveling the landscape and
installing gutters and downspouts that direct the water away from the structure. Moisture
infiltration into surface components (masonry, cladding, etc.) could sink and cause leaks in
underground areas.

6. Groundwater control is more complicated as groundwater levels fluctuate throughout the
year. The liner must be designed and installed to accommodate groundwater at its peak, even
if this is a temporary or rare condition.
Adequate underground sealing must include a system to collect, drain and drain groundwater
away from the structure. The most effective way to collect
We're here to help! Call Us Today!
9911505849
What Our Customers Say About Us
I booked a free consultation from them, and get a good advice for my terrace. After that i call
them after one month for work and they did it very well. It have been 2 week and yesterday is
raining in Delhi and not a single drop come. Satisfy with there work. Thanks
Ranjit Singh
I have read about kk buildtech on quora and i call them for some minor leakage and they
consult me on phone for free of cost. by there instructions i have done my work. and i am
very much satisfy with there consult. now i am refering them to one of my friends thanks.
Dinesh Chaudhary
Thanks for your consultation about waterproofing. I am very much satisfy with your work. I
called many contractors they tell me lot of work and cost around 1 lakh for my terrace but
Mr. Kundan came and find out the real problem that was drainage nali default and they fix it
in one day and charges very less around nothing. And sepage was gone. I am very much
satisfied with them. Thanks
Brijesh Singh
100 % Best Work100%
waterproofing in delhi
waterproofing in noida
waterproofing in gurgaon
What is water insulation?
** Before we can answer what waterproof materials are, we must ask ourselves what does
water insulation mean?
Waterproofing is the process of making an object or structure waterproof or water resistant.
Thanks to this process, the insulating material or structure is not affected by water or resists
water penetration under specific conditions. These items can be used in humid environments

7. or below certain depths. It is sometimes used to increase the comfort of buildings by using it
on surfaces such as balconies or warehouses that should be in contact with water. The
question of waterproofing materials should be raised depending on the area of application.
Waterproofing in buildings is the formation of an impermeable barrier on the surfaces of
foundations, roofs, walls and other structural elements to prevent the passage of water from
these surfaces. The construction surfaces are water repellent and partially waterproof.
In other words, a waterproofing is a protective measure that waterproofs a surface or prevents
unwanted penetration of liquids under other external forces, such as hydrostatic pressure and
capillary action. It is a process that allows the installation of a continuous system using elastic
and durable membranes. This is a technique used in the construction and design industries to
reduce the impact of liquid ingress on systems. Insulation increases the durability of concrete
surfaces in a building. Advantages of waterproofing
To give a sensible answer to the question of what waterproof materials are, we must first
understand why this is necessary. Any building is subject to deterioration if not properly
maintained. In this way, some natural factors such as air, water, atmospheric agents, wind and
humidity become manageable. When a structure is not protected from water, problems such
as deterioration or damage to the structure from the foundation to the plaster can occur.
Buildings must be insulated against water against the following causes:
natural factors
unexpected fires
Water – rain and humidity
Strong wind
large earthquakes
unnatural factors
theft damage
collapse of buildings
Structural failure in buildings
Other antisocial actions
Waterproofing is a process designed to prevent water from entering a building. Extensive
waterproofing measures are usually added to provide moisture control to the building during
construction, and waterproofing can also be done after the construction of a building or as
part of a building renovation or remodeling.
KK BUILDTECH
Office Address
A – 500/1 Guru nanak gali giri marg mandawali delhi – 92
Call Us
9911505849 , 9868961531
Email kkbuildtech01@gmail.com
site:www.kkbuildtech.in