ASTM A 519 Seamless mechanical tubing is manufactured from carbon and alloy steels for structural or other mechanical purposes involving machining or heat treating, where close tolerances, smooth finish, or definite physical properties are important factors. It is a cost effective alternative to DOM steel tubing.
1. Wuxi Xingye Special steel Co., Ltd
ASTM A519 Grade
1026/C1026 Carbon Steel
Mechanical Tubing
ASTM A519 SAE1026 seamless tubing hot rolled process
The ASTM A519 Grade 1026 tube is usually manufactured by hot working
steel. The hot worked steel manufactured under this specification could either
be carbon steel or this process could be used to make the ASTM A519 1026
Chrome Alloy Steel Hf Smls Tubing. If necessary, the Chrome Moly Steel ASTM
A519 1026 Boiler Tubing could be subsequently cold finished by hot working
the tubular product. Hot working the Alloy Steel ASTM A519 1026 Square
Tubing in order to produce the desired dimensions, shape as well as certain
properties.
The specified ASTM A519 Grade 1026 tubes, are generally furnished in the
following shapes i.e. rectangular, round or square. If required, At Aesteiron,
we manufacture these ASTM A519 Grade 1026 Mechanical Tubing furnished
in special sections, according to the need of our clients or if required by the
application for which it is to be used for. Heat analysis is usually performed
on the ASTM A519 Grade 1026 Steel Tubing in order to determine the
percentages of the elements specified in the material used to make these
tubes. Although If secondary melting processes are used in the melting of A519
gr 1026 Seamless Tubing, the heat analysis could be obtained either from one
re-melted ingot or the product of one re-melted ingot of every single primary
melt. The ASTM A519 1026 Hot Finished Tubing has to be coated with a film
of oil before shaping to retard rust when specified
Standard ASTM A519 / ASME SA 519
ASTM A519
This standard covers seamless hot-finished and cold-
finished mechanical tubing
Size Range 12 3/4(323.8mm)
Outer Diameter
(OD)
6.25-1800mm
Pipe Schedule 10 – XXS / Thk
2. Wuxi Xingye Special steel Co., Ltd
Shape round, square, rectangular, hex and special shape.
Length
Single / Double random length
or as customer’s actual request
Grade SAE 1026 / AISI 1026 / GRADE 1026.
Mill test
certificates
EN10204.3
Terms of sale
All tubes shall be supplied as per applicable ASTM
A519 Specification.
Orders for material under A519 should provide
delivery condition (A, N, QT, SR)
Standard ASTM A519 / ASME SA 519
ASTM A519
This standard covers seamless hot-finished and cold-
finished mechanical tubing
Size Range 12 3/4(323.8mm)
Outer Diameter
(OD)
6.25-1800mm
Pipe Schedule 10 – XXS / Thk
Shape round, square, rectangular, hex and special shape.
Length
Single / Double random length
or as customer’s actual request
Grade SAE 1026 / AISI 1026 / GRADE 1026.
Mill test
certificates
EN10204.3
Terms of sale
All tubes shall be supplied as per applicable ASTM
A519 Specification.
Orders for material under A519 should provide
delivery condition (A, N, QT, SR)
UNS Grade G10260 Tube Size Schedule Chart
HF-Hot Finished
CW-Cold worked
RT-Rough Turned
G– Ground
SAE J412 Grade 1026 Thermal Treatments
A-Annealed
N– Normalized
3. Wuxi Xingye Special steel Co., Ltd
QT-Quenched and Tempered
SR-Stress Relieved or Finish Anneal
ASTM A519 SAE1026 seamless tubing cold drawn process
Grade Summary: DOM Steel Tube is typically produced using uniformly high
quality C1026 steel strip which is formed and electric resistance welded into its
basic shape. What makes DOM different to ERW Tube is that after annealing to
produce a uniform grain structure throughout, the tube is then cold drawn over a
mandrel to give it uniform shape, close wall tolerances and high physical
properties. The cold working process also works the weld area to produce a weld
line that virtually disappears, causing DOM tube to appear seamless.
Typical Applications: Mechanical, hydraulic cylinders, shaft, tight tolerance
requirements
Available products: Round Tube
ASTM A519 SAE1026 seamless tubing Chemical Composition (%):
Typical Mechanical Properties**:
Tensile Strength (PSI) 80,000
Yield Point (PSI) 70,000
Elongation:15%
Grade C Mn P≤ S≤
1026 0.22-0.28 0.60-0.90 0.040 0.050
4. Wuxi Xingye Special steel Co., Ltd
Get in Touch
If you are interested in our products or cooperate with us, even having a comment or a
suggestion please contact us now, for more detailed information.
Ms.Freya
Skype: Freya Wong
Email: freya@yeguangsteeltubing.com
Website: www.yeguangsteeltubing.com