Here we would like to share Some measures for prevention and control of pests in flour milling factory If you need more details please email us freely. wheatmaizemill2@gmail.com
Some measures for prevention and control of pests in flour milling factory
1. SHIJIAZHUANG HONGDEFA MACHINERY CO., LTD
Address: No.388 NORTH JIANHUA STREET SHIJIAZHUANG, HEBEI, CHINA.
Post Code: 050034 Cell: +86 138 3110 7620 Website: www.wheatmaizemill.com
HONGDEFA MACHINERY whatsapp: +86 138 3110 7620 www.wheatmaizemill.com 1
Some Measures For Prevention And Control of Pests In Flour Milling Factory
During the hot and humid seasons, flour pests breed fastest and most vigorously. The biggest headache for flour
mills is the problem of flour insects. Not good pest control, not only affect the quality of products, but also have a
certain negative impact on economic efficiency, and then on the flour pest control problem, to share with you.
The first is the cognition of mealworms.
Mealworms
mealworms are mainly tribolium Castaneum, and their developmental stages are divided into four stages: Egg,
Larva, PUPA and adult. The optimum developmental temperature was 27 °c ー 30 °C and the relative humidity
was 70% . The life cycle of tribolium castaneum was about 40 days under the condition of 29 °C, 75% relative
humidity and whole wheat flour. Each female can lay more than 300 eggs in a lifetime. The rapid growth and
reproduction of these insects make it difficult to prevent and control insect pests in flour mills.
Next is the place where the insects breed: in addition to the high temperature and humidity environment needed
for the pests to grow and reproduce, they also need the relevant environment, which is generally not easy to clean
up, such as the bottom of the barn, the strangler, the corner of the wall, etc. These static areas, which are not
suitable for removing the remaining flour, are the best breeding grounds for flour mealworms.
2. SHIJIAZHUANG HONGDEFA MACHINERY CO., LTD
Address: No.388 NORTH JIANHUA STREET SHIJIAZHUANG, HEBEI, CHINA.
Post Code: 050034 Cell: +86 138 3110 7620 Website: www.wheatmaizemill.com
HONGDEFA MACHINERY whatsapp: +86 138 3110 7620 www.wheatmaizemill.com 2
Wheat flour
Maize meal
1. Shorten storage life.
Make a more practical sales plan, flour production, timely distribution. The shorter the storage period of flour, the
less likely it is to breed insects. The disadvantage is that it is difficult to forecast the market uncertainty, and to
some extent it is easy to affect the sales plan and the total sales.
3. SHIJIAZHUANG HONGDEFA MACHINERY CO., LTD
Address: No.388 NORTH JIANHUA STREET SHIJIAZHUANG, HEBEI, CHINA.
Post Code: 050034 Cell: +86 138 3110 7620 Website: www.wheatmaizemill.com
HONGDEFA MACHINERY whatsapp: +86 138 3110 7620 www.wheatmaizemill.com 3
Maize flour and maize grits
2. Hygienic pest control.
The summer production workshop does not leave dead space, does not give the space which in the flour insect
eggs propagates. To do after the shutdown, the equipment and pipes to empty the surplus materials, although it
will cause some cleaning powder, but mainly destroyed the root causes of insect breeding, to a large extent, the
control of insect pests. Workshop and storeroom should be well ventilated, because flour has inhalation effect, so
must make air circulation, storage of flour around the environment, can not smell, off the wall to reduce flour
contamination rate, reduce the breeding of insects and rats. The advantages of this method are green and low cost.
Bakery flour
3. Low temperature pest control.
Low temperature pest control. The ideal temperature for flour storage is 18 ~ 24°C, and the metabolism of insects
can be reduced by too low temperature, so as to control pests. Therefore, the storage of flour environment to the
right temperature and humidity, flour will change its moisture content according to the temperature and humidity
of the environment, the greater the humidity, the water content of flour increase, easy to caking, speed up the
breeding of insects. The higher the temperature is, the faster the flour will mature and the faster the insects will
4. SHIJIAZHUANG HONGDEFA MACHINERY CO., LTD
Address: No.388 NORTH JIANHUA STREET SHIJIAZHUANG, HEBEI, CHINA.
Post Code: 050034 Cell: +86 138 3110 7620 Website: www.wheatmaizemill.com
HONGDEFA MACHINERY whatsapp: +86 138 3110 7620 www.wheatmaizemill.com 4
breed. However, the disadvantage of low temperature storage is the high cost.
4. Drying and killing insects.
We all know that dry flour with less than 13% moisture is not easy to breed insects. Therefore, using flour drying
method, drying flour with high moisture content to 14% or less of the specified moisture content will reduce the
breeding environment for flour insects Now there are domestic manufacturers using this technology. The
advantages of this technology are to reduce the risk of pests and to improve the quality of flour, but it needs the
support of a large market of special flour, because the reduction of water means the loss of economic benefits.
Dead Bugs
5. Drug Fumigation and inert gas pest control.
Drug Fumigation and inert gas pest control. Centralized shutdown in summer, after doing a good job to clean the
machine sealed work, please have the national fumigation qualification of professional fumigation units of the
production equipment for professional chemical fumigant. The advantage of this method is to completely kill most
of the eggs, the disadvantage is that the fumigation cycle is too long, affecting market sales. If the use of inert gas
fumigation will avoid the above trouble, but the cost is also high. Now many organizations are experimenting with
inert-gas Nitrogen Packaging, which shows that nitrogen can suffocate pests, can be filled in closed production
plants after a shutdown, or can be filled in flour bags To prevent the breeding of insects.
Drug Fumigation
In short, the elimination of pests in flour is a comprehensive control work, mainly based on prevention, integrated
control.
Hongdefa Machinery had so many customers in Africa for maize milling machines and wheat flour milling
machine.
5. SHIJIAZHUANG HONGDEFA MACHINERY CO., LTD
Address: No.388 NORTH JIANHUA STREET SHIJIAZHUANG, HEBEI, CHINA.
Post Code: 050034 Cell: +86 138 3110 7620 Website: www.wheatmaizemill.com
HONGDEFA MACHINERY whatsapp: +86 138 3110 7620 www.wheatmaizemill.com 5
It is high temperature in the most of Africa countries. So it is very important thing to kill pets in the factory.
So many cockroaches in the production line.But our machines can remove them by cleaning machines and we also
pay a lot of attention for it, in our design of the machine, we use the special machine for killing the worm egg and
so on.
Engineer teach the local people how to clean the machines
Our customer is happy with our service for flour milling machines
Some customers should pay a lot of attention for the mouse. They will broken the cables and PLC control system
wire. And bring the big problem for stopping the machines. So when you take the correct way to kill them. It is
very good for developing the business.
6. SHIJIAZHUANG HONGDEFA MACHINERY CO., LTD
Address: No.388 NORTH JIANHUA STREET SHIJIAZHUANG, HEBEI, CHINA.
Post Code: 050034 Cell: +86 138 3110 7620 Website: www.wheatmaizemill.com
HONGDEFA MACHINERY whatsapp: +86 138 3110 7620 www.wheatmaizemill.com 6
Customer visiting to buy maize and wheat flour milling machine
We always do our best support to the customers who need the maize milling machines and wheat flour milling
machine. And most welcome contact with Hongdefa.
Thanks
Contact : Ms. Tony Yao
Cell/Whatsapp: +86 138 3110 7620
Website:www.wheatmaizemill.com
#flourmillingmachine #hongdefa #wheatflourmillingmachine #maizeflourmillingmachine