Some simple operation of wheat flour milling rolle +8613722885205

SHIJIAZHUANG HONGDEFA MACHINERY CO., LTD.
Mobile/Whatsapp: +86 13722885205 Email: penny@hdfmill.com
Operation Of Wheat Flour Milling Roller Mill Machine
The same wheat flour production line, the same raw grain, and different operating
skills will produce significantly different flour milling effects. As far as the grinding
effect and equipment operation in wheat flour milling are concerned, good technology
and equipment are the prerequisite, and the correct operation skills are the guarantee.
Only in production practice, in strict accordance with the requirements of process
design, comprehensive consideration and careful operation, can the overall effect of
the process be brought into play.
1. Grinding effect of roller mill
The main equipment in the grinding process is the mill machine. In the process design,
the grinding effect of the mill machine is measured by the stripping rate and the flour
extraction rate. Its size is measured by an experimental sieve, but in the process of
milling The size of the material is tested by observing the crushing condition of the
material after grinding, and the degree of grinding is judged by analysis. In order to
find out the problems in process, equipment and operation in time.

2. Operating skills of the mill
Determine the best flow into the mill
Each flour path has a certain flow range. When the flow is too large, the uniformity of
material crushing will decrease. If the flow is too small, it is easy to make the feeding
state abnormal and the equipment work unstable. In the process of wheat flour milling,
the best feed rate should be determined according to the condition of the raw grain. At
the same time, it is necessary to combine the ambient temperature and humidity to
detect the maximum inlet flow rate that can be reached at the time, and gradually
adjust the flow to ensure that the materials are distributed to each system in the
proportion required by the process design, so as to determine the best inlet flow rate.

After the optimal feed rate is determined, if the moisture, softness and hardness of the
raw grain do not change much, it is not advisable to frequently adjust the feed rate to
avoid disrupting the process balance and causing blockage and material drop. If the
water content is uneven, the inlet flow rate should be adjusted appropriately.
Generally, when the moisture deviates by 1% from the best water entering the mill,
the flow of entering the mill should be reversely adjusted by about 10%. In addition,
changes in seasons and climate also have a significant impact on the optimal grinding
flow rate. When high temperature, high humidity, and low air pressure, the material is
wet and sticky, the grinding flow rate should be appropriately reduced.
3.Final summary
The grinding effect of the mill is affected by many factors such as the nature of the
incoming material, the flow rate, the feeding effect, the operating parameters of the
mill, the surface parameters and processing quality of the grinding roller, the
assembly quality and cleaning effect of the grinding roller, and the operation index. To
stabilize the grinding effect, ensure that the quality, flow, and particle size of the
incoming materials are uniform. The working parameters of the mill are reasonable
and accurate, and the operation is safe and reliable. The surface parameters of the mill
should be adjusted appropriately according to the material properties, flow, grinding

requirements, ambient temperature, humidity, etc. To improve equipment operating
skills, we must strictly follow the regulations and indicators to perform fine
operations. The skin mill system must achieve the target stripping.
While strictly controlling the stripping rate and powder extraction rate of each pass, it
also controls the total stripping rate, powder extraction rate and the integrity of the
bran. The heart mill system must achieve the target powder extraction, while ensuring
that the bran flakes contained are not excessively broken, it also extracts the wheat
flour of the corresponding quality and particle size in a targeted manner. Practice has
proved that the quality of the obtained wheat flour is completely different by
selectively grinding and extracting flour and non-selectively pulverizing and
extracting flour. As far as wheat flour milling machine and machine operation are
concerned, good craftsmanship and equipment are the prerequisite, and correct
operation skills are the guarantee. Only in production practice, in strict accordance
with the requirements of process design, comprehensive consideration, careful
operation, more observation, more analysis, and more thinking. Only in this way can
the best process effect be achieved, and the various economic and technical indicators
can be guaranteed and improved, and the best effect of high quality, high extraction
and high efficiency can be achieved.
Wheat flour mill machine project:

300T/24H wheat flour milling machine in Malaysia

300T wheat flour mill in Afghanistan
If you want to know more information about Hongdefa maize/corn flour milling
machine,
Please contact: Penny
Mobile/Whatsapp: +8613722885205
Web:www.hong-de-fa.com

Some simple operation of wheat flour milling rolle +8613722885205

Recommended

Recommended

More Related Content

Similar to Some simple operation of wheat flour milling rolle +8613722885205

Similar to Some simple operation of wheat flour milling rolle +8613722885205 (20)

Recently uploaded

Recently uploaded (20)

Some simple operation of wheat flour milling rolle +8613722885205