1. CURICULUM VITAE
NAME: Tomáš
SURNAME: Mintál
DATE OF BIRTH: 19.07.1980
ADDRESS : Francúzska 90, 935 21 Tlmače
EMAIL ADDRESS: tomasmintal@gmail.com
tomas@mintal.sk
EDUCATIONAL ATTAINMENT:
2004 – 1999
Faculty of Material science and Technology of STU Bratislava
production quality engineering
1996 – 1999
Secondary Technical School in Levice
Technical and Informatic Servicies
EXPERIENCES DURING THE UNIVERSITY STUDY:
2003 – 8 weeks during the summer holliday in IABG Munich
Germany
WORK EXPERIENCES:
SES a.s. Tlmače
12.7.2004 – 12.1.2006 – technology department – pressure and
nonpressure parts - creating the technological procedures for
fabrication for all types of equipment based on the technical
drawings. These procedures were the basic input for fabrication
of all goods.
13.1.2006 – department of project realisation. It was direct
responsibility for the whole project – communication with
customer (briefly, by phone) on daily basis. It was responsibility

2. for the quality, costs and manufacture based on approved time
schedule and mostly also for delivery on site.
1.7.2012 – 30.11.2012 – Purchasing department – position
expeditor
1.12.2012 - Assignee CEO for QMS and EMS – responsibility for
the QMS – ISO 9001:2008 and ISO 14001:2004 as the whole
systems (managing the documentation, distribution the all types
of documents – quality and environmental manuals, plan of
internal audits, quality policy and whole documentation on the
2nd and 3rd level, solving the noncomformities, doing the internal
and external audits. During this year I hade already 2 certification
audits for both systems according to standards EN ISO
9001:2008 and EN ISO 14001:2004.
Responsibilities:
- Is responsible for the activities needed for creating,
implementation, maintanance and certification and certification
Quality management system (QMS) and Environmental
manageemnt system (EMS) according to the actual valid
standard
- Is responsible for the fact, that actual version of the all
documents is according to the requirements of EN 9001:2008
and EN ISO 14001:2004
- Continuous informing the top management of the company
with the actual status of both systems (QMS and EMS) and
with level of the improvement
- Is responsible for continuous improvement of efficiency of the
QMS and EMS by internal audits and by CA and PA
- Is responsible for the QMS and EMS trainings
Competences:
- Coordinating of activities, giving and checking the tasks, which
are needed for implementation, maintaining and certification
QMS and EMS
- Has the right to order planned and unplanned QMS and EMS
audits
- Can require the information from the managers on the all
levels of managing about the actual status and keeping QMS
and EMS

3. 1.8.2013 – 30.11.2014 – QA Manager
Responsabilities
- Planing of the sources for the actual projects
- Managing the calibration of the whole equipment
- Training the quality staff on site
- Pay attention of the certificates validation of staff
- Preparing the audits on site
- Motivating the staff
- Give the information to general manager
Competences:
- Coordination of activities on site, giving and checking the
tasks which are needed in quality field on site
- Can do the internal audit (planned or not planned) on site
- Can require the all information about the quality on site
1.12.2014 – ENEL – Quality assurance specialist
Responsabilities:
- To carry out root cause analysis (RCA) according to ISO
9001:2008 and ENEL procedures to determine the prime
cause of nonconformity (5Why, 4M or any suitable technique)
- To prepare corrective and preventive actions (CA/PA)
according to ISO 9001:2008 and ENEL procedures and with
the purpose of eliminating the prime cause of Non conformity
in order to prevent its repeatability.
- To carry out continuous improvement analysis by using the
PDCA – plan, do, check, act technique according to IDO
9001:2008
- Continualy improve the effectiveness quality management
system through to use the quality policy, quality objectives,
audits results, analysis of data, corrective and preventive
actions and management review.
- To prepare and manage the periodical reports to the various
quality topics
- To survey the documents issued by ENEL contractors
- To manage the project referrence documentation list
according to ENEL procedures
LANGUAGE KNOWLEGE:
English – advanced
German – intermediate

4. PC SKILLS:
MS WORD – advanced
MS EXCEL – advanced
MS PROJECT – beginner
POWER POINT – advanced
OUTLOOK EXPRESS - advanced
REALIZED PROJECTS:
- US STEEL Košice – repairs and any spare parts
- Železiarne Podbrezová – spare parts – upper parts of
furnace, cooling panels,
- Maschienenfabrik Liezen – delivery of stators and holders
- ALSTOM Power Service France – delivery of membrane
panels, headers and coils
- ALSTOM Stuttgart – delivery of membrane panels, headers
and coils and assembly of corners
- ADATO s.r.o. Levice – delivery of two pieces of HRSG boilers
– with power 85 MWe. – ten pieces of modules, with watering
pipes, two pieces of boiler drums
- STAKOTRA s.r.o – manufacturing and assembly two sets of
sheers
- EBARA – procuction of 3 new CFB (circulated fluidized bed )
boilers included the maintanance and final documentation
(passport) and 2 years service.
- KostolacB – reconstruction and modernisation of the whole
furnace and the superheaters 1 and 2.
- Obrenovac A - reconstruction and modernisation of the whole
furnace and the superheaters 1,2 and 2.
- AKSA TURKEY – production of non-pressure parts (steel
structure) in Ankara (Turkey) – from July 2012 till November
2012
Assignee CEO for QMS and EMS – from 1.12.2012 – 30.11.2014
ENEL – Quality assurance specialist – from 1.12.2014